Key Takeaways
- An employment contract is a stampable document. Under item 4 of the First Schedule to the Stamp Act 1949 the duty is a fixed RM10 per original contract, normally paid by the employer because the first person to sign pays (HASiL FAQ, 3 July 2025).
- Contracts paying RM3,000 a month or less are exempt from 1 January 2026. The Budget 2026 tax bill raised the item 4 threshold from RM300 to RM3,000 a month, and since HASiL's statement of 7 August 2026 these contracts do not need to be stamped or endorsed at all.
- Above RM3,000, stamp only the main contract. The same statement says side documents on the same employment (policy acknowledgements, benefit letters) need no stamp.
- Deadline: 30 days from signing, then 30 days to pay. Late stamping costs RM50 or 10% of the duty within three months, and RM100 or 20% after that (HASiL penalty page).
- Service agreements are not RM10. Guard, cleaning, maintenance and contractor agreements with a fixed value pay 0.1% of the contract value including SST after remission, paid by the factory receiving the service (HASiL guideline, 29 September 2026).
A factory signs more contracts than most businesses: operators, supervisors, engineers and expatriates on the payroll, plus security, cleaning, haulage, maintenance and fit-out contractors. Since HASiL (LHDN) began enforcing the stamping of employment contracts and moved stamp duty to self-assessment on 1 January 2026, each of those documents has a clear rule. This guide sets them out for factory and warehouse operators in Selangor and the rest of Malaysia.
Do Employment Contracts Need to Be Stamped in Malaysia?
Yes, unless an exemption applies. Section 4(1) of the Stamp Act requires every instrument listed in the First Schedule to be stamped, and HASiL treats a contract that creates an employer and employee relationship as an item 4 agreement charged RM10 (HASiL FAQ). The duty is set by what the document does, not by its title, so:
- an offer letter signed by both sides is the employment contract when it is the only document binding the two parties;
- temporary, part-time, short-term and contract staff are covered, because every written document is an instrument;
- an intern's offer letter is covered when it shows an employer and employee relationship;
- a renewed contract is a new instrument and must be stamped again.
The RM3,000 exemption from 1 January 2026
Item 4 has always exempted agreements for personal employment below a wage limit, but the limit was RM300 a month, so almost every contract paid duty. Budget 2026 proposed raising it to RM3,000, and clause 29 of the Finance Bill 2025 substituted "RM3,000 per month" for "RM300 per month" in item 4 with effect from 1 January 2026, as set out in HASiL's reply to the Budget 2026 joint memorandum.
What changed on 7 August 2026
Earlier HASiL answers told employers to keep submitting exempt contracts: the July 2025 FAQ treated binding addenda such as IT policies and benefit letters as dutiable, and the HASiL and CTIM tax forum answers said exempt contracts should still be stamped "until further official notice". That notice came on 7 August 2026. HASiL now says:
- Contracts with monthly pay of RM3,000 or less do not need to be stamped or endorsed.
- For contracts above RM3,000, only the main contract with the terms of employment is stamped and endorsed.
- Side documents on the same employment do not need to be stamped or endorsed.
Where an older article or checklist says otherwise, the 7 August 2026 statement is the newer official position.
Which Factory Contracts Pay RM10, and Which Pay Nothing?
Sort your contracts by the monthly wage stated in each one.
| Document | Signed from 1 January 2026 | Duty |
|---|---|---|
| Operator or general worker contract, RM3,000 a month or less | Exempt | None, no submission needed |
| Supervisor, technician, engineer or manager contract above RM3,000 | Dutiable | RM10 per original |
| Expatriate contract above RM3,000 | Dutiable | RM10 per original |
| Renewal of a contract above RM3,000 | New instrument | RM10 |
| Benefit letter, policy acknowledgement or other side document on the same job | Not stamped (since 7 August 2026) | None |
| Extra signed original (duplicate) of a stamped contract | Dutiable | RM10 |
Three points matter more in a factory than in an office:
- Foreign workers. Wages decide, not nationality. If a contract is written in a language other than Malay or English, HASiL's FAQ requires a line-by-line translation in the same document for stamping, made by an accredited translator. Our guide to hiring expatriates and foreign workers for a factory covers the permits that come before the contract.
- Pay rises across RM3,000. HASiL's reply in the joint memorandum said a later letter that raises pay above RM3,000 must be stamped under item 4 or item 22 if it forms an agreement that creates a liability to pay. The forum answers add that increment letters depend on whether they are an agreement or a one-way notice. The 7 August statement does not deal with this case directly, so check with HASiL when a contract crosses the line.
- Older contracts. Contracts finalised before 1 January 2025 were exempted by the Finance Minister under section 80(1A). Contracts signed in 2025 were dutiable at RM10 under the old RM300 limit.
How Much Is the Duty, Who Pays and By When?
- Amount: RM10 per original under item 4. HASiL's guideline on First Schedule instruments files employment contracts under general stamping, where the duty is a flat RM10 whatever the salary.
- Who pays: the person who signs first, which is normally the employer.
- Filing deadline: within 30 days of signing in Malaysia, or 30 days after a contract signed abroad reaches Malaysia. HASiL's forum answer says the instrument date is the latest signing date, so a letter dated 10 March, signed by the employer on 12 March and by the worker on 16 March is dated 16 March.
- Payment: under the self-assessment guideline, general stamping joined self-assessment in phase 1 on 1 January 2026. You file the stamp duty return (BNDS) on e-Duti Setem in MyTax, the duty is deemed assessed that day, and you pay within 30 days.
- Records: keep the stamped document and the stamp certificate for seven years (section 35B).
Late stamping penalties
| How late | Penalty |
|---|---|
| Within 3 months after the deadline | RM50 or 10% of the unpaid duty, whichever is higher |
| More than 3 months after the deadline | RM100 or 20% of the unpaid duty, whichever is higher |
On a RM10 contract the minimum penalty is larger than the duty itself. An unstamped contract also cannot be used as evidence in court until it is stamped (section 52), which matters if a dismissal or a training bond is ever disputed.
Stamping a whole payroll at once
A factory hiring a batch of supervisors does not have to key in each contract by hand: HASiL's forum answers confirm that bulk stamping uses an XML file, prepared by the company or on HASiL's template. The screens on MyTax are the same as for a tenancy or a loan, shown step by step in our guide to paying duti setem LHDN online.
Unstamped 2023 to 2025 documents: the 31 December 2026 window
HASiL's Special Voluntary Disclosure Programme waives the late penalty automatically for every kind of instrument signed from 1 January 2023 to 31 December 2025, provided it is stamped and the duty paid by 31 December 2026 (HASiL, 26 June 2026). That covers 2025 employment contracts that missed the earlier 31 December 2025 cut-off, and any unstamped factory tenancy or contractor agreement from those years. No appeal is needed, documents stamped under the programme will not be audited, and it does not apply to fraud. HASiL advises filing early so the assessment notice and payment both fall inside the window.
Service Agreements: Guards, Cleaners, Maintenance and Contractors
A contract with a company or freelancer to do work for the factory is a service agreement, not an employment contract, and the RM3,000 exemption does not apply. HASiL's 29 September 2026 guideline sets the rules:
- Statutory rate: item 22(1)(a), RM5 for every RM1,000 or part of the contract value, including SST, rounded up to the next RM1,000.
- Remission: P.U.(A) 428/2021 cuts the duty to 0.1% of the contract value for agreements signed from 28 December 2018. In a chain of contracts the 0.1% applies at one level only.
- Sub-contracts further down the chain: duty above RM50 is remitted, but only if the sub-contract names the parties and date of the main agreement, its subject, and states that the main agreement was duly stamped. Below RM50 the actual duty is paid.
- Minimum: RM10 (section 36CB).
- Who pays: the party receiving the service, which is the factory.
| Contract a factory signs | How it is charged | Duty |
|---|---|---|
| Two-year cleaning contract, fixed total RM96,000 including SST (illustration) | 0.1% after remission | RM96 instead of RM480 |
| Fit-out contract of RM650,000 including SST (illustration) | 0.1% after remission | RM650 instead of RM3,250 |
| Panel clinic at RM2,000 a month, ends on 3 months' notice (HASiL example) | Item 22(1)(b): RM1 per RM100 of each payment | RM20 |
| Land filling at RM115 per lorry load until done (HASiL example) | Total cannot be known: item 4 | RM10 |
The two illustrations apply HASiL's formula to round numbers; they are not quotes. Where the payer is the Government or a state, the agreement is exempt, and a local authority's agreements are exempt under P.U.(A) 174/1986, but they must still be submitted for endorsement.
Employee or Contractor: How HASiL Tells the Difference
HASiL looks for the marks of employment: parties called employer and employee, regular wages, fixed hours and workplace, company rules, EPF, SOCSO and annual leave, work under the employer's direction, and no work for others without consent. A document with those marks is an RM10 item 4 contract. Without them it is a contract for services under item 22(1)(a), charged on its value. If you take workers through a labour contractor, your agreement with that contractor is normally a service agreement rather than an employment contract, so check its value and terms under item 22.
What Else Does a Factory Stamp?
Employment and service contracts are only part of the stamping a factory does. A tenancy is charged on the annual rent and the length of the term, not at a flat RM10: see our factory tenancy agreement stamp duty guide and the tenancy stamp duty calculator. Transfers and loans are covered in our guide to the Stamp Act 1949 for factory owners.
Common Mistakes
- Stamping every contract out of habit. Since 7 August 2026, contracts at RM3,000 a month or less need no submission.
- Stamping every side letter. Above RM3,000 only the main contract is stamped.
- Forgetting renewals. A renewed contract above RM3,000 is a new instrument.
- Treating a contractor agreement as RM10. A service agreement with a fixed value pays 0.1% including SST, and the factory pays it.
- Missing 31 December 2026. Unstamped documents from 2023 to 2025 lose the penalty waiver after that date.
Frequently Asked Questions
Do employment contracts need to be stamped in Malaysia?
Yes, when the monthly pay is above RM3,000. The main contract pays RM10 under item 4 of the Stamp Act's First Schedule and must be filed within 30 days of signing. Since 7 August 2026, HASiL says contracts paying RM3,000 a month or less do not need to be stamped or endorsed.
How much is the stamp duty for an employment contract?
RM10 for each original contract, whatever the salary above RM3,000. Each extra signed original is another RM10 once the first original is stamped. Late stamping adds at least RM50.
Who pays the stamp duty on an employment contract, the employer or the employee?
The Stamp Act puts the duty on the person who signs first. In practice the employer signs the offer letter or contract first, so the employer pays.
What are the changes to stamp duty in Malaysia in 2026?
From 1 January 2026, stamping moved to self-assessment on e-Duti Setem in MyTax, starting with tenancies, loans and general stamping. The employment contract exemption rose from RM300 to RM3,000 a month, and HASiL's voluntary disclosure programme waives late penalties on 2023 to 2025 documents stamped and paid by 31 December 2026.
What happens if an employment contract is not stamped?
An unstamped contract cannot be used as evidence in court until it is stamped (section 52), and section 63 allows a fine on whoever executes it unstamped. Stamping late costs RM50 or 10% of the duty within three months of the deadline, and RM100 or 20% after that, whichever is higher.
Is a service agreement stamped at RM10 like an employment contract?
No. A service agreement with a fixed value is charged 0.5% of the value including SST, remitted to 0.1%, and the party receiving the service pays. Only a service agreement whose total cannot be worked out, such as a rate per lorry load, pays the RM10 fixed duty.
Do contracts for foreign workers need to be stamped?
The same RM3,000 test applies to every worker regardless of nationality. A contract above RM3,000 written in a language other than Malay or English needs a line-by-line translation in the same document before HASiL will stamp it.
How much stamp duty is charged on a factory tenancy agreement?
A tenancy is charged on the annual rent and the length of the lease, not at the RM10 employment rate. Use the FactoryHub tenancy stamp duty calculator to work out the figure for your rent and term.
This guide explains published HASiL rules and is not legal or tax advice; confirm the treatment of a specific document with HASiL or your tax agent.
FactoryHub is dedicated to helping every client find the right factory or warehouse. For a factory or warehouse to rent or buy in Klang, Port Klang or anywhere in Selangor, call or WhatsApp Peter Tan (REN 12771) at 016-666 6872.
