Key Takeaways
- Two separate systems. Expatriates (managers, engineers, technicians) need an Employment Pass, which a manufacturer applies for through the MIDA Expatriate System. Production workers need a foreign worker quota, applied for through the eQuota module in FWCMS under the Human Resources Ministry (KESUMA) since 6 July 2026, and then a Visit Pass (Temporary Employment) from Immigration.
- Technicians from China come in as expatriates, not as foreign workers. China is not on the Immigration Department's list of source countries for foreign workers. A Chinese technician on your payroll needs an Employment Pass; one who stays on the Chinese supplier's payroll to install machines needs a Professional Visit Pass (PVP), which lasts at most 12 months and cannot be extended.
- The entry tickets for expatriates are set by MIDA. You need a manufacturing licence or an ICA10 exemption letter first, paid-up capital of RM500,000 if the company is 100% foreign-owned, and Labour Department approval under section 60K. A term post in manufacturing must pay at least RM7,000 basic salary a month; a key post at least RM20,000. MIDA's client charter is 15 working days.
- Foreign worker quotas are the hard part. Employers must advertise on MyFutureJobs and get section 60K approval before applying. When quotas reopened in August 2025, manufacturing was limited to new investments under MIDA, and in July 2026 The Star reported the general freeze on new quotas was still largely in place. The levy is RM1,850 per worker a year in Peninsular Malaysia.
- Housing decides the site as much as the building does. Every employer that houses workers needs a JTKSM certificate under Act 446, and Klang's city council has said temporary worker housing in shop offices and existing factories will face enforcement, with workers moved to centralised labour quarters (CLQ).
This guide is general information, not legal or immigration advice. Pass rules and quota policy change often, so check the MIDA, Immigration and KESUMA pages linked below before you apply.
Expatriate or foreign worker: which route fits each person you need?
Start with a headcount list, then match each person to a pass. The route depends on who pays the person, how long they stay and how much they earn, not on their nationality alone.
| Person you need | Route | Who processes it | How long | Main condition |
|---|---|---|---|---|
| Owner, director, C-suite | Employment Pass, key post | MIDA with its Immigration unit | EP Category I up to 10 years | RM20,000 basic salary; foreign paid-up capital of RM1 million |
| Engineer, production manager, senior technician on your payroll | Employment Pass, term post | MIDA with its Immigration unit | EP Category III up to 5 years; Category II up to 10 | At least RM7,000 basic in manufacturing; qualification plus experience; localisation plan |
| Supplier's technician installing or repairing machines, paid by the overseas company | Professional Visit Pass | MIDA | Maximum 12 months, not extendable | Section 60K approval; K1 customs form or purchase order for the machines |
| Production operators and general workers | Visit Pass (Temporary Employment) | KESUMA one stop centre, then Immigration | 12 months a pass, up to 10 years in total | Quota, levy, approved source country, age 18 to 45 |
| Malaysians | Direct hiring | Your HR team | Permanent | A MyFutureJobs advertisement also comes before term posts and foreign worker quotas |
Sources: MIDA's Employment Pass guideline of 1 June 2026, MIDA's PVP guideline, MIDA's announcement of the revised expatriate policy and the Immigration Department's foreign worker page.
Can a Malaysian factory hire technicians from China?
Yes, but only as expatriates. The Immigration Department's foreign worker page lists the source countries allowed for foreign workers: Indonesia, Thailand, Cambodia, Bangladesh, Myanmar, Laos, Vietnam, Pakistan, Sri Lanka, Turkmenistan, Uzbekistan, Kazakhstan, Nepal, the Philippines (men only, outside domestic work) and India (for listed sectors including manufacturing). China is not on it. So a Chinese machine operator cannot be brought in on a foreign worker quota; a Chinese technician, engineer or manager can come on an Employment Pass or a PVP.
Long-term technicians: Employment Pass term post
MIDA's term post is meant to transfer know-how to Malaysians. Under the June 2026 guideline the technician needs a certificate with 7 years of related experience, a diploma with 5 years, or a degree with 3 years. MIDA's FAQ accepts a testimonial instead of a certificate when the person is a shareholder, owner or director named in the SSM record. The company also submits a localisation plan naming the Malaysian who will take over and the training schedule.
Salary is where most applications fail. The revised salary FAQ from the Immigration Department's Expatriate Services Division says EP Category III in manufacturing needs RM7,000 to RM9,999, counted on basic salary only, with allowances and other payments left out. Since 1 June 2026, Category III holders may also bring dependants, which was not allowed before.
Short jobs: Professional Visit Pass
When your Chinese equipment supplier sends engineers to install, commission, maintain or repair a line, the PVP guideline is the route. The technician stays employed by the overseas company, works only for the Malaysian sponsor named in the pass, and cannot bring dependants. You submit:
- A cover letter per person with a month-by-month work schedule.
- The full passport, valid for at least 12 months.
- Section 60K approval from the Labour Department.
- Proof of 7, 5 or 3 years of experience for a certificate, diploma or degree.
- A personal or security bond.
- The K1 customs form for the imported machines, or, if they have not landed, the purchase order or bill of lading with a justification letter.
- The letter of award or contract for the installation.
The PVP guideline says technical experts should enter Malaysia only after the PVP is approved. A team that flies in on a visit and starts installing is the mistake to avoid. If the job runs past 12 months, MIDA's FAQ says the person must leave Malaysia before a new PVP for a different product or project phase is submitted.
How does a foreign company apply for work permits for its expatriates?
Through a Malaysian company. MIDA's guideline says the application must come from a registered company in Malaysia acting as the employer, and that company must already hold a manufacturing licence, an interim approval letter or an ICA10 exemption letter. Most foreign manufacturers therefore incorporate a Sdn Bhd first, as our guide on setting up a factory in Malaysia as a foreign company explains, and then apply for the manufacturing licence or ICA10 exemption.
Step by step
- Paid-up capital. RM500,000 for a 100% foreign-owned company, RM350,000 for a joint venture, RM250,000 for a Malaysian-owned company. A key post also needs foreign paid-up capital of at least RM1 million.
- Section 60K approval. Apply on the Labour Department's ePPAx system. The JTKSM expatriate FAQ says a decision takes five working days, the approval is valid for six months, and one approval can cover as many expatriates as you need while it is valid. Hiring a foreign employee without it carries a fine of up to RM100,000, up to five years in prison, or both.
- Advertise on MyFutureJobs for term posts, unless the post is exempt: basic salary of RM15,000 or more, investors, shareholders or owners, corporate transfers from the overseas head office, representative or regional offices, or a renewal with no change.
- Prepare documents: the full passport, the employment contract stamped by LHDN, certificates translated into English and certified, and the organisation chart showing existing and new expatriates.
- Apply on the MIDA Expatriate System through the Xpats Gateway. MIDA's FAQ sets 15 working days end to end: 10 for MIDA and 5 for the Immigration unit inside MIDA.
- After the person starts work, send Form PA 1/13 to the nearest JTKSM office within 14 days, and Form PA 2/13 within 30 days after the employment ends.
Employment Pass categories since 1 June 2026
| Category | Basic salary a month | Maximum period |
|---|---|---|
| EP I | RM20,000 and above | 10 years |
| EP II | RM10,000 to RM19,999 | 10 years, with a succession plan |
| EP III | RM5,000 to RM9,999, or RM7,000 to RM9,999 in specified manufacturing sectors | 5 years, with a succession plan |
Source: MIDA's announcement of the revised policy. The duty to submit and follow the succession plan starts on 1 January 2027, according to MIDA's notice on the phased succession plan, so name your Malaysian successors now. The ESD FAQ adds that the employment period is now counted per employing company, and contracts of up to 60 months can be submitted.
Fees per person
| Item | Employment Pass | Professional Visit Pass |
|---|---|---|
| MIDA evaluation fee | RM2,000 | RM1,200 |
| Immigration processing | RM125 | Not listed |
| Pass issuance | RM200 term post, RM300 key post | RM180 or RM360 |
| Visa | RM6 to RM50 | RM6 to RM50 |
All figures exclude 8% SST. MIDA's FAQ also warns that since 1 July 2025 a company found submitting false information or forged documents is barred from applying for six months.
Foreign worker quota application: how does a factory apply?
A factory applies for a foreign worker quota online, through the eQuota module in FWCMS, and only after it has advertised the jobs to Malaysians on MyFutureJobs and obtained section 60K approval. The relevant agency recommends, the Home Ministry decides, and since the quota reopened in August 2025 manufacturing quotas have focused on new investments approved by MIDA. On 6 July 2026 the Human Resources Minister said all quota applications must go through the eQuota module in FWCMS with no case-by-case approvals, as reported by The Star and Malay Mail. The order is:
- Register the company on FWCMS (fwcms.com.my).
- Advertise the vacancies to Malaysians on MyFutureJobs.
- Obtain section 60K approval.
- Submit the quota application in eQuota. The relevant regulatory agency gives its recommendation to the one stop centre, and the Home Ministry keeps the final say on security grounds.
- Receive the conditional approval letter (SKB). KESUMA told Bernama on 22 August 2026 that the SKB can be issued within 14 days if the application is complete.
- Recruit in an approved source country. Workers enter only at designated entry points with the VDR and entry visa, pass a FOMEMA medical within 30 days, and receive the Visit Pass (Temporary Employment) at the Immigration office that issued the VDR.
In December 2025 the Home Ministry told employers to submit applications directly, without agents or third parties. Treat anyone selling a "guaranteed quota" with caution.
Will a factory get a quota at all?
That depends on whether your project is new and approved by MIDA. When the quota reopened in August 2025, the Home Minister said manufacturing would focus on new investments under MIDA, and said the 13th Malaysia Plan sets a new ceiling of 10% foreign workers. The Star's July 2026 report says the general freeze on new quota approvals "remains largely in place". On 28 October 2026 the Cabinet Committee on Foreign Workers agreed that the quota mechanism and ceiling need collective decisions, The Star reported, without announcing new numbers. Before you size a production line around foreign labour, check in eQuota what your sub-sector can apply for.
Two more rules sit in the background. MITI has deferred the 80:20 employment ratio written into manufacturing licence terms until the multi-tier levy mechanism is fully in place, The Edge reported. In October 2026 The Edge noted that the multi-tier levy, meant to make heavy users of foreign labour pay more, was supposed to roll out this year under the 13th Malaysia Plan.
What a foreign worker costs beyond the wage
| Cost | Amount | Source |
|---|---|---|
| Levy, manufacturing, Peninsular Malaysia | RM1,850 per worker a year | Immigration Department |
| Pass and processing | RM60 pass plus RM125 processing a year | Immigration Department |
| Visa | By nationality, e.g. Indonesia RM15, Bangladesh RM20, Vietnam RM13 | Immigration Department |
| Security bond | By nationality, e.g. Indonesia RM250, Bangladesh RM500, Vietnam RM1,500 | Immigration Department |
| EPF | 2% employer plus 2% employee from October 2025 wages | The Star |
| Minimum wage | RM1,700 now; RM2,000 from June 2027, with firms under RM50 million revenue exempt | The Edge |
Each yearly renewal also needs SPIKPA health insurance and the foreign worker compensation scheme; our guide to foreign worker insurance for factories covers both. A worker may stay up to 10 years in total.
Where will the workers live? Act 446 and your factory site
Housing must be certified before anyone moves in. The Labour Department enforces Act 446 in Peninsular Malaysia and Labuan, and the 2020 fee regulations set the Certificate for Accommodation fee at RM100 for ten employees or fewer and RM300 for more. Space standards, toilets and penalties are in our Act 446 guide.
The bigger question is the council. On 23 May 2025 MBDK said it had approved 213 planning applications for temporary labour quarters and 10 centralised labour quarters, that centralised quarters would be built in Kapar, Meru and Telok Gong within five years, and that temporary worker housing still running in shop offices and existing factories would face enforcement. If you rent a terrace or semi-detached factory in Klang, plan on CLQ beds and a daily bus, not a dormitory upstairs.
What to check on site
- Whether the title's express condition and the council allow any accommodation on the lot.
- How far the nearest certified CLQ is, and how long the bus ride takes at shift change.
- Whether the landlord will allow worker transport to park and turn inside the compound.
- Space for a canteen, changing rooms and prayer rooms if you run shifts.
Is there enough labour near the factory?
No official source publishes labour supply by industrial park, so you have to test it. Our guide to which Klang Valley industrial area makes it easy to hire workers shows how to read DOSM district data. In practice:
- Post the MyFutureJobs advertisement early. You need it for the quota and term post anyway, and the response tells you how many local applicants the area produces.
- Map the commute. Check public transport from the residential areas to the gate at shift times.
- Count your neighbours. Large plants in the same park hire from the same pool; ask their HR teams what their turnover looks like.
- Separate skill levels. Operators come from nearby housing; engineers and technicians are recruited more widely, so road access to the wider Klang Valley matters more for them.
What does this mean when you choose a factory?
Your hiring plan changes the factory you need and the order in which you sign. The broader site selection checklist covers power, port access and flood risk; on the labour side:
- Timing. Employment Passes and PVPs need the manufacturing licence or ICA10 letter first. Ask for a rent-free fit-out period that covers licensing and pass approvals; see our guide on negotiating factory rent.
- Scale. A plan that depends on a large foreign workforce carries quota risk. A more automated line in a smaller building may be the safer bet.
- Housing budget. Price CLQ beds and transport into your monthly cost before comparing rents.
- Quick timeline. Section 60K: about 5 working days. Employment Pass or PVP: 15 working days. Foreign worker SKB: within 14 days if complete. FOMEMA medical: within 30 days of arrival.
Common mistakes
- Bringing technicians on a visit and starting installation before the PVP is approved.
- Meeting the EP salary floor with allowances; only basic salary counts.
- Housing workers in the factory without a certificate or council approval.
- Assuming an existing manufacturing operation can still get new foreign worker quota.
- Paying an intermediary for a quota instead of applying directly in FWCMS.
Housing the workers is a local question: Ms Teh Seok Hoon explains CLQ and hiring in Klang, and Jason Low covers worker hostels near Rawang, Serendah and Shah Alam.
Frequently Asked Questions
Can a Malaysian factory hire technicians from China?
Yes, as expatriates. A Chinese technician on your payroll needs an Employment Pass, which in manufacturing means at least RM7,000 basic salary for a term post plus a qualification and years of experience. A technician who stays on the Chinese supplier's payroll to install or repair machines uses a Professional Visit Pass of up to 12 months. China is not an approved source country for the foreign worker permit.
How does a foreign company apply for work permits in Malaysia?
The Malaysian company (usually a Sdn Bhd) applies on the employee's behalf. It needs a manufacturing licence or ICA10 exemption, paid-up capital of RM500,000 if 100% foreign-owned, section 60K approval from the Labour Department and, for term posts, a MyFutureJobs advertisement. The application goes through the MIDA Expatriate System, which aims to decide in 15 working days.
How do I apply for a foreign worker quota for my factory?
Register on FWCMS, advertise the jobs on MyFutureJobs, get section 60K approval, then apply in the eQuota module. KESUMA says a complete application can receive its conditional approval letter within 14 days. For manufacturing, the openings announced since 2025 have focused on new investments approved by MIDA.
How much is the foreign worker levy for the manufacturing sector?
RM1,850 per worker a year in Peninsular Malaysia and RM1,010 in Sabah and Sarawak, according to the Immigration Department. Add RM60 for the pass, RM125 processing, the visa fee by nationality and a security bond. A multi-tier levy was due to roll out in 2026 under the 13th Malaysia Plan, so check whether it has started before you budget.
How long does it take to get a work permit in Malaysia?
For an Employment Pass or PVP through MIDA, 15 working days once the application is complete, after a section 60K approval that takes about five working days. Foreign workers take longer, because the quota, recruitment abroad, the visa and the FOMEMA medical come in sequence.
How does a foreign company recruit staff in Malaysia?
Malaysians are hired directly, and MyFutureJobs is the government portal where vacancies are advertised. Key managers and specialists come on Employment Passes, supplier technicians on PVPs, and production workers through a foreign worker quota where one is available. Register the company with EPF before the first payroll, since non-Malaysian employees now also contribute 2% to EPF.
Can expatriates bring their family to Malaysia?
Employment Pass holders in all three categories may apply for dependant passes; for Category III this applies to passes approved from 1 June 2026. PVP holders cannot bring dependants on their pass.
Is there enough labour near my factory?
No official figure exists per industrial park. Test the area by posting your MyFutureJobs advertisement early, checking public transport at shift times and asking how far the nearest certified CLQ is. Our guide to hiring in Klang Valley industrial areas shows how to read DOSM district data.
FactoryHub is dedicated to helping every client find the right factory or warehouse. If you are planning headcount, housing and a factory together, call Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.
