Key Takeaways
- A foreign manufacturer can own all of its Malaysian factory company: MIDA's equity policy has allowed 100% foreign equity in new manufacturing projects since June 2003. Most incorporate a Sdn Bhd with SSM, which SSM's client charter puts at one working day and RM1,000 plus RM50 for the name.
- Paid-up capital is set by the approvals you need, not by company law: RM500,000 for a 100% foreign-owned company to hire expatriates, foreign paid-up capital of at least RM1 million for a permanent key post, and a MIDA manufacturing licence once shareholders' funds reach RM2.5 million or you employ 75 full-time staff.
- Rent first unless you are certain of the site. A tenancy of up to three years is exempt from registration under the National Land Code, while buying in Selangor needs state consent, a minimum price of RM3,000,000 for industrial property and, for a foreign-owned manufacturer, a MITI manufacturing licence.
- Machines shipped from your existing plant do not get MIDA's machinery duty and sales tax exemption, which only covers new, unused machines, and some items such as cranes and used printing machinery need an import licence or approval letter before they sail.
- Power usually decides the opening date. TNB's own lead times run from under 3 months for a 400 V supply without a substation to 6 to 12 months at 11 kV and 18 months to 2 years at 33 kV.
This guide is for owners of manufacturing companies in China, Singapore, Taiwan, Japan or Korea who are moving a production line to Malaysia, or adding a second one, and who expect to rent or buy a detached or semi-detached factory, a large warehouse or industrial land in Selangor and the Klang Valley. Each section starts with the direct answer, then the rule and its source, then what to check on site. It is general information, not legal or tax advice: confirm your own case with MIDA, a licensed company secretary and a conveyancing lawyer.
How can a foreign company set up a factory in Malaysia, step by step?
Incorporate the company first, settle your MIDA position, secure the building, then run the power supply, fit-out approvals and machine imports in parallel. The company takes days; the building, power and approvals take months.
| Step | What you do | Who decides | Official time or fee |
|---|---|---|---|
| 1 | Incorporate a Sdn Bhd, or register your overseas company as a branch | SSM | 1 working day once complete; RM1,000 + RM50 name + RM10 data fee |
| 2 | Apply for a manufacturing licence, or an ICA10 exemption letter | MIDA (for MITI), on the InvestMalaysia portal | Self-assessment route; the guideline gives no day count |
| 3 | Expatriate posts and Employment Passes | MIDA Expatriate System with Immigration | 15 working days if complete; RM2,000 MIDA fee per application plus Immigration fees |
| 4 | Choose the state, district and building | You, after land office and council checks | Varies |
| 5 | Rent (tenancy or registered lease) or buy (state consent) | Landlord, your lawyer, the land office | Selangor consent fee RM200 per title |
| 6 | Apply for TNB supply or an upgrade | TNB, through your electrical consultant engineer | Under 3 months to 2 years, by voltage |
| 7 | Environmental, safety and fire approvals for the fit-out | DOE, DOSH, Bomba, local council | Depends on your process |
| 8 | Ship the machines | MIDA and Customs for exemptions, permit agencies for controlled items | Exemption must be cleared before import |
| 9 | Business premise licence, then start production | Local council | Varies by council |
According to MIDA's expatriate system FAQ, the InvestMalaysia portal handles manufacturing licence, incentive, grant, exemption from licence and import duty exemption applications in one place, so most of the investment paperwork runs through one login. Steps 4 to 8 overlap, and the order matters: MIDA's machinery exemption asks for a machine layout plan inside your approved premises, so you cannot finish step 8 before step 5.
Does a foreign company need a Sdn Bhd, and how much paid-up capital?
Not strictly, but in practice almost always. SSM's guideline on foreign companies says a foreign company may carry on business either by incorporating a local company or by registering the foreign company itself. Branch registration is priced on the parent's share capital: RM5,000 up to RM1 million, RM20,000 up to RM10 million, RM40,000 up to RM50 million, RM60,000 up to RM100 million and RM70,000 above that. A local Sdn Bhd costs RM1,000 to incorporate under SSM's local company guideline, needs at least one director whose principal place of residence is in Malaysia, and must appoint a company secretary within 30 days.
Two more reasons manufacturers choose the Sdn Bhd: MIDA's Employment Pass guideline requires the application to come from a registered company in Malaysia acting as the employer, and the Selangor land office describes its foreign acquisition route as one for companies incorporated in Malaysia and owned by non-citizens.
What actually sets the paid-up capital figure
SSM's incorporation guideline sets no minimum paid-up capital. The numbers that matter come from MIDA:
| Threshold | Figure | What it decides | Source |
|---|---|---|---|
| Expatriate posts | RM500,000 paid-up (100% foreign-owned), RM350,000 (joint venture), RM250,000 (Malaysian-owned) | Whether you can hire expatriates at all | MIDA EP guideline, 1 June 2026 |
| Key post | Foreign paid-up capital of at least RM1 million; basic salary at least RM20,000 a month | A permanent post for your senior manager | Same |
| Term post, manufacturing | Basic salary at least RM7,000 a month; degree plus 3 years, diploma plus 5 or certificate plus 7 | Engineers and technicians, with a plan to train a Malaysian successor | Same |
| Manufacturing licence | Shareholders' funds of RM2.5 million, or 75 full-time paid employees | Whether you must hold a licence | MIDA e-ML guideline |
| Licence criteria | Capital investment per employee of at least RM140,000; at least 80% Malaysian full-time workforce; at least 25% managerial, technical and supervisory staff or 40% value added | Whether the licence is approved | Same |
One detail helps tenants: MIDA counts fixed assets including 10 years of rent for land and building when it works out capital investment per employee, so renting does not count against you.
Which approvals does the factory need besides MIDA?
Expect separate approvals for the environment, for pressure and lifting equipment, for fire safety and for the premises licence. Which ones apply depends on your process, so list them from the machine and process list before you sign for a building.
Manufacturing licence or ICA10 exemption
The Industrial Coordination Act 1975 requires a licence at RM2.5 million shareholders' funds or 75 full-time employees. A company below both may apply to MIDA for exemption through the ICA10 online application. Either letter matters later: MIDA's expatriate approvals, its machinery exemption and the Selangor purchase circular all refer to the licence or the exemption.
Employment Passes for your own people
Under the June 2026 MIDA guideline, a new application needs JTK approval under section 60K of the Employment Act 1955, a passport with at least 12 months of validity and, for term posts, a MyFutureJobs advertisement first, unless the post pays RM15,000 or more, is held by an investor or shareholder, or is a corporate transfer from your head office. The client charter is 15 working days. Fees are RM2,000 to MIDA per application plus RM125 processing, RM200 (term post) or RM300 (key post) pass issuance and a visa fee of RM6 to RM50 to Immigration, before SST.
Environment, boilers, cranes and fire
- DOE. An EIA report is needed only if your project is listed in the Environmental Quality (Prescribed Activities) (EIA) Order 2015, and DOE approves the report, not the project. Fuel burning equipment, bag filters, chimneys and exhaust systems, scrubbers, spray booths and generator sets each have a written notification form under regulation 5 of the Clean Air Regulations 2014 on DOE's forms page.
- DOSH. Since 1 June 2024, under the Occupational Safety and Health (Plant Requiring Certificate of Fitness) Regulations 2024, a steam boiler needs DOSH design verification before it is manufactured, installed or used, and power-driven lifting machinery needs design verification and a certificate of fitness before installation or use. DOSH publishes a separate application guide for used imported steam boilers.
- Bomba and the council. The fire certificate and the business premise licence are separate approvals on the building, and a change of use or new partitions can reopen both.
How do you move a production line from China to Malaysia?
Treat the machines as an import project with its own approvals, and size the building from the machine list rather than from the floor area you use today.
New machines get the exemption, used machines do not
MIDA's guideline for manufacturers in the Principal Customs Area gives import duty exemption on machinery and equipment and sales tax exemption on machinery, equipment and spare parts, but only if they are "new, unused and directly used in the manufacturing process". You apply before the machines are imported or bought, with:
- Your manufacturing licence or ICA10 exemption letter.
- The council business premise licence, if you hold an ICA10 exemption.
- The DOSH registration certificate, or its acknowledgement letter.
- The latest SSM company profile (e-info).
- A process flow chart.
- A layout plan showing where each machine will stand in the approved premises.
So a line moved from your existing plant is outside this exemption. Ask your forwarder to price import duty and sales tax for each machine at its own tariff code before you decide which machines to move and which to buy new.
Some equipment needs an import licence first
The Customs (Prohibition of Imports) Order 2023, in force from 15 April 2023, lists most cranes under heading 8426 as needing an import licence from MITI, and used printing machinery under heading 84.43 as needing an approval letter from the Director General of Environmental Quality. The order has been amended since, so have every HS code on the packing list checked against the current version before the container leaves port.
Size the building from the machines
Add up the connected load of the line and convert it to amps with the factory power calculator, then check the incoming TNB supply on site, not the figure in the advertisement. Check the floor slab under presses and moulding machines, the clear height under any crane beam, and that a 40 ft container can turn into the loading bay. Our partner site walks through a move in Klang in detail: relocating a factory in Klang: power, approvals, machines and overlap rent.
Selangor or another state: how do you choose a regional production base?
Choose the state by supply chain and port first, then check power availability and registered land prices. MIDA's first half 2026 results put Selangor first by approved investment at RM70.0 billion across 835 projects, the highest number of projects of any state, followed by Johor (RM59.4 billion), Kuala Lumpur (RM26.6 billion), Penang (RM20.2 billion) and Sarawak (RM10.8 billion). The People's Republic of China ranked fourth among foreign sources at RM16.5 billion.
Clusters matter more than incentives. An ISEAS study of Chinese technology investment (18 August 2026) finds semiconductors and electronics in Penang's Bayan Lepas Free Trade Zone and Batu Kawan, data centres in Johor's Sedenak Tech Park, battery and solar plants in Kedah's Kulim Hi-Tech Park and Gurun, and electric vehicle assembly in Tanjung Malim, Perak.
| Decision factor | What to check | Where the answer comes from |
|---|---|---|
| Customers and suppliers | Where your buyers and tier-one suppliers already are | Your own supply chain map |
| Port and air freight | Trucking time to Port Klang or your chosen port and to KLIA | Your forwarder |
| Power | The supply on site today and the voltage you will need | TNB, through your consultant engineer |
| Land and building cost | Registered prices and rents in that district | JPPH-registered deals |
| Foreign purchase rules | Minimum price and consent route of that state | The state land office |
Registered deal volume shows how much industrial stock changes hands: 1,263 industrial deals worth RM5.72 billion were registered in Selangor and Kuala Lumpur in the 12 months to August 2026, 288 of them in Klang and Port Klang. For larger floor plates see our guide to factory space of 50,000 to 100,000 sq ft in the Klang Valley.
Rent or buy the factory, and what will it cost?
For a first plant, rent; buy once the line is stable and you know the area works. The full rules for each route are in our guide on whether a foreign company can buy or rent a factory in Malaysia.
Renting
Under sections 213 and 223 of the National Land Code, a tenancy of up to three years is "exempt from registration" and can be granted by word of mouth or a written instrument in any form; a lease of more than three years is granted on Form 15A and registered on the title, for up to 30 years when it covers only part of the land. JPPH-registered tenancies in Selangor and Kuala Lumpur over 24 months show a median rent of RM1.54 psf a month, with a typical term of 24 months. Semi-detached factories rented at a median RM1.75 psf (RM12,900 a month for about 7,960 sq ft) and detached factories at RM1.38 psf (RM12,500 a month for about 8,220 sq ft). In Klang and Port Klang, detached factories rented at RM1.22 psf, a median RM19,700 a month for about 15,090 sq ft. Compare by park on industrial transaction prices and rents.
Landlords and their lawyers usually ask a foreign tenant for the SSM company profile, the directors' passports, a board resolution approving the tenancy and a description of the process to be run in the building.
Buying in Selangor
The Selangor land office's foreign acquisition page and its Circular 1/2014 set the rules for sale and purchase agreements signed from 1 September 2014:
- Minimum price RM3,000,000 for industrial property in all three zones (Zone 1: Petaling, Gombak, Hulu Langat, Sepang and Klang; Zone 2: Kuala Selangor and Kuala Langat; Zone 3: Hulu Selangor and Sabak Bernam).
- A foreign-owned manufacturing buyer must hold a manufacturing licence from MITI. If your company holds an ICA10 exemption instead, have your lawyer confirm with the land office what it will accept before you sign.
- Bumiputera units are not allowed, and agricultural land, Malay reserve land and auction purchases are excluded.
- Processing fee RM200 per title (RM1,000 on appeal); an approval is valid for two years.
JPPH-registered sales in Selangor and Kuala Lumpur over 24 months put the median semi-detached factory at RM4.9 million (RM375 psf of land) and the median detached factory at RM10 million (RM281 psf of land). In Klang and Port Klang the median detached factory was RM14.9 million (RM270 psf of land). Transfer stamp duty for a foreign company is a flat 4% of the price or market value on industrial property, as LHDN confirmed in its 2026 tax seminar answers.
Cost items with official figures
| Item | Figure | Note |
|---|---|---|
| Sdn Bhd incorporation | RM1,000 + RM50 name + RM10 | SSM |
| Branch registration instead | RM5,000 to RM70,000 | By parent share capital |
| Employment Pass | RM2,000 MIDA + RM125 + RM200 or RM300 + visa RM6 to RM50 | Per person, before SST |
| Selangor purchase consent | RM200 per title | RM1,000 on appeal |
| Transfer stamp duty, foreign company | 4% | Industrial property |
| Minimum wage | RM1,700 a month today | Budget 2027 raises it to RM2,000 from June 2027, with a temporary exemption for SMEs below RM50 million in annual sales |
| TNB connection charges | Varies | Set in TNB's Notice of Connection Charges after its system study |
| Duty on used machines | Varies | By HS code; not covered by MIDA's exemption |
Fit-out, logistics and the overlap with your current plant vary too much to put a number on; ask your contractor and forwarder for written quotes.
How long does it take?
Plan on the power supply and building approvals, not the company, setting the date. Official times:
| Stage | Official time | What stretches it |
|---|---|---|
| SSM incorporation | 1 working day | Queries on the application (30 days to answer) |
| Employment Pass | 15 working days | Incomplete documents; JTK and advertising steps |
| TNB, 400 V without substation | Under 3 months | Council approvals |
| TNB, 400 V with substation | 3 to 12 months | Substation building and land handover |
| TNB, 11 kV | 6 to 12 months | Same |
| TNB, 33 kV | 18 months to 2 years | Same |
| Selangor purchase consent | No published time | Approval valid two years once given |
The TNB figures are from TNB's supply application handbook, which also says your electrical consultant engineer submits the application through myTNB and that the applicant builds any substation to TNB's specification. If the building you rent already has the supply your line needs, power drops off the critical path, which is the strongest argument for choosing the building by its incoming supply.
Why Malaysia and where to set up: more questions
Why are manufacturers choosing Malaysia, and how does China Plus One affect industrial property?
MIDA approved RM51.3 billion of manufacturing investment across 973 projects in the first half of 2026, with China ranked fourth among foreign sources overall, and ISEAS describes Chinese firms using Malaysia to spread supply chain risk around tariffs and export controls. On the property side, JPPH-registered data for Selangor and Kuala Lumpur shows like-for-like semi-detached factory prices up 11% across 28 parks and detached prices down 4% across 13 parks over the last 12 months; the data does not say why.
How do I choose between Selangor, Penang and Johor for a regional production base?
Start with your customers, suppliers and port. Penang clusters semiconductors and electronics, Johor leads in data centres, Kedah in battery and solar, and Selangor had the most approved projects of any state in the first half of 2026 along with Port Klang. Then compare power on site and registered land prices district by district.
Is there a Chinese-speaking industrial property adviser in Selangor?
Yes. Peter Tan (REN 12771), whose native language is Mandarin, and Jason Low (PEA 1478), who also speaks Mandarin, Cantonese and Hokkien, work on factories, warehouses and industrial land in Klang, Port Klang and the rest of Selangor. You can brief them online in Chinese before you fly in.
Frequently Asked Questions
Which industrial area in Selangor is best for a foreign company setting up a factory?
No area is reserved for foreign companies, so choose as any manufacturer would: by customers, port or airport, power and labour. A foreign-owned company can rent anywhere, while buying in Selangor needs state consent and a minimum price of RM3,000,000 for industrial property in every zone. Exporters often look at the free industrial zones or the Port Klang belt, E&E at light industrial estates such as Shah Alam and Subang, and heavier processes at Pulau Indah or Kapar. Many rent first and buy once the line is stable.
What does a Japanese company need to set up a factory in Malaysia?
Japanese companies follow the same rules as other foreign manufacturers. Most incorporate a Sdn Bhd, which can be 100% foreign-owned in manufacturing, and apply to MIDA for a manufacturing licence once shareholders' funds reach RM2.5 million or staff reach 75 (otherwise an ICA10 exemption). Hiring expatriates needs RM500,000 paid-up capital. MIDA has offices in Tokyo and Osaka that can brief you before you come. Most firms rent first; buying in Selangor needs at least RM3 million and State approval.
What restrictions apply when a foreign company buys a factory in Selangor?
The price must be at least RM3,000,000 for industrial property in all three Selangor zones, and the purchase needs State approval under section 433B of the National Land Code, triggered at 51% or more foreign shareholding. A foreign-owned manufacturer must hold a MITI manufacturing licence. Bumiputera units, Malay reserve land, agricultural land and auction purchases are excluded. Transfer stamp duty is a flat 4%, the land office charges RM200 per title, and approval is valid for two years. Confirm with your lawyer.
How can a Chinese company set up a factory in Malaysia?
Incorporate a Sdn Bhd with SSM, apply to MIDA for a manufacturing licence or an ICA10 exemption, then apply for expatriate posts through the MIDA Expatriate System. Secure a building, apply for TNB supply through an electrical consultant engineer, obtain DOE, DOSH, Bomba and council approvals for the fit-out, and clear machinery exemptions with MIDA and Customs before shipping.
Does a foreign company need a Sdn Bhd to set up a factory in Malaysia?
SSM allows either a local company or a registered branch of the foreign company. Most manufacturers choose a Sdn Bhd because Employment Passes must be applied for by a company registered in Malaysia, and Selangor's land office describes its foreign purchase route for companies incorporated in Malaysia and owned by foreigners. A Sdn Bhd costs RM1,000 to incorporate; a branch costs RM5,000 to RM70,000 depending on the parent's share capital.
How much paid-up capital does a foreign manufacturing company need in Malaysia?
There is no fixed minimum to incorporate. To hire expatriates, a 100% foreign-owned company needs RM500,000 paid-up, and a permanent key post needs foreign paid-up capital of at least RM1 million. A manufacturing licence becomes compulsory once shareholders' funds reach RM2.5 million or you employ 75 full-time staff.
What documents does a foreign company need to rent a factory in Malaysia?
Landlords and their lawyers usually ask for the SSM company profile, the directors' passports, a board resolution approving the tenancy and a description of the process you will run. A tenancy of up to three years is exempt from registration under the National Land Code; a longer lease must be registered on the title.
Can I bring used machines from my China factory?
Yes, but they do not qualify for MIDA's import duty and sales tax exemption, which only covers new, unused machines, so budget duty and tax for each one by its HS code. Cranes need a MITI import licence and used printing machinery needs a DOE approval letter under the 2023 import order, and boilers and power-driven lifting machines need DOSH design verification before use.
FactoryHub is dedicated to helping every client find the right factory or warehouse. To shortlist buildings by power, height and floor loading for your line, talk to Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834. Company setup basics are in our guide to starting a business in Malaysia as a foreigner.
