Key Takeaways
- Yes, activity falls first and hardest. In 1998 industrial property transactions in Malaysia fell 48.1% in number and 55.5% in value (Bank Negara Malaysia Annual Report 1998). In 2020 they fell 24.0% in number and 14.0% in value (NAPIC Property Market Report 2023).
- There is no official factory price index in these reports. The index NAPIC publishes is the Malaysian House Price Index for homes. For factories the records give deal counts, deal values and price changes in selected schemes, so any claim that "factory prices fell X%" needs checking against registered deals in the same estate and of the same type.
- The rebound after 2009 and 2020 came within a year on the record. Industrial deals in the first half of 2010 were up 29.3% in number and 44% in value on the first half of 2009. National industrial deal value in 2021 (RM16.96 billion) was already above 2019 (RM14.85 billion); the number of deals passed the 2019 level in 2022.
- A factory suits long holding when the next owner is easy to find: freehold or a long lease, a general purpose building, an estate with steady registered deals, and papers in order.
- Plan the exit at purchase: who the next buyer is, the RPGT rate for your holding year, how many lease years will remain, and enough cash to wait through a slow sale.
Do industrial property prices fall in a recession in Malaysia?
The direct answer: transactions fall first and fastest, and in a deep crisis the value of deals falls even further than their number. Whether the price of one particular factory falls depends on its estate, type, tenure and who is buying at the time. Malaysia's public records measure three different things, and mixing them up is the most common mistake investors make when they read about past crises.
| Measure | What it tells you | Where it comes from |
|---|---|---|
| Number of transactions (volume) | How many buyers are active | NAPIC, the property information centre of JPPH |
| Value of transactions | Total money that changed hands, moved by both price and the mix of deals | NAPIC |
| Price | What a comparable factory sells for | NAPIC price movements for selected schemes; JPPH-registered deals by estate |
The price index in NAPIC's annual Property Market Report is the Malaysian House Price Index, which covers homes only. For industrial property the same report describes price movements in selected schemes. In its 2025 report, for example, NAPIC recorded capital appreciation of 2.2% to 8.5% for one and a half storey terraced factories in Selangor, with transaction prices reaching RM3.53 million. So when anyone quotes a single percentage for "factory prices" in a past downturn, ask which estate, which type of factory and how it was measured.
Why value can fall faster than the number of deals
When value falls more than volume, the average recorded deal became smaller. That happens when prices fall, when fewer large factories and land parcels change hands, or both. The national totals cannot tell the two apart, which is why the estate level check matters more than any headline.
What happened to industrial property in 1998?
This was the deepest fall in the records. Bank Negara's Annual Report 1998 states that industrial property transactions contracted by 48.1% in volume and 55.5% in value in 1998, while commercial property transactions fell 44.1% in number and 43.9% in value. The National House Price Index for the first half of 1998 fell 8.5%, the first downward correction for houses since 1988.
The recovery did not start at once. Bank Negara's Annual Report 1999 shows that across all property, transactions fell 32.3% in number and 47.6% in value in 1998. House prices fell a further 12% in the first half of 1999, while total property transactions rose 21.1% in number and 23.1% in value over the year. A 23.1% rise does not make up for a 47.6% fall, so total value was still well below its 1997 level at the end of 1999. That report gives no separate industrial figure for 1999.
One detail matters to factory buyers. When Bank Negara limited bank lending to parts of the property sector to 20% of total loans in April 1997, lending for industrial factories and buildings was among the categories excluded, together with lending to expand productive capacity (Bank Negara paper, Journal of Valuation and Property Services, 1998). That was a policy choice for that crisis, not a promise for the next one.
What happened to industrial property in 2009?
The 2009 downturn was milder and the rebound came within about a year. In April 2009, at the launch of the 2008 Property Market Report, JPPH's director general said the market was set on a path of moderation with prices and rentals correcting but unlikely to plunge, and when asked which sub-sector was vulnerable he said, "Perhaps, it is industrial" (The Edge).
Total property transactions from January to June 2009 fell 9.5% in number and 26.5% in value (Economic Report 2010/2011, Ministry of Finance). Bank Negara cut the Overnight Policy Rate by a total of 150 basis points between November 2008 and February 2009 (Annual Report 2009). By the first half of 2010, NAPIC recorded 4,648 industrial transactions worth RM4.4 billion, up 29.3% and 44% from 3,596 transactions worth RM3.6 billion in the first half of 2009, with terraced factories and warehouses the most traded type at 1,548 deals (NAPIC Property Market First Half 2010 Report, reported by The Edge).
What happened to industrial property in 2020?
Deals fell sharply in the year of the Movement Control Order, and value was back above its pre-pandemic level within a year. NAPIC's national figures:
| Year | Industrial transactions | Change | Value | Change |
|---|---|---|---|---|
| 2019 | 6,261 | +3.8% | RM14.85 billion | -1.1% |
| 2020 | 4,758 | -24.0% | RM12.76 billion | -14.0% |
| 2021 | 5,595 | +17.6% | RM16.96 billion | +32.9% |
| 2022 | 8,082 | +44.5% | RM21.16 billion | +24.8% |
| 2023 | 8,157 | +0.9% | RM23.94 billion | +13.1% |
| 2024 | 8,783 | +7.7% | RM27.86 billion | +16.4% |
| 2025 | 8,910 | +1.4% | RM33.8 billion | +21.3% |
Source: NAPIC Property Market Reports 2023, 2024 and 2025.
Selangor followed the same path. NAPIC's Central Region report for 2024 shows 1,601 industrial transactions worth RM7.29 billion in 2020 (down 27.6% and 11.9%), then 1,952 worth RM8.92 billion in 2021 (up 21.9% and 22.3%) and 2,731 worth RM10.05 billion in 2022. Kuala Lumpur fell harder in 2020, down 43.0% in number and 47.2% in value.
How long did industrial property take to recover after each downturn?
| Downturn | Fall on record | Rebound on record |
|---|---|---|
| 1998, Asian financial crisis | Industrial deals -48.1%, value -55.5% | All property 1999: +21.1% deals, +23.1% value; no separate industrial figure |
| 2009, global financial crisis | All property January to June 2009: -9.5% deals, -26.5% value | Industrial first half 2010: +29.3% deals, +44% value |
| 2020, pandemic | Industrial deals -24.0%, value -14.0% | Value above 2019 in 2021; deals above 2019 in 2022 |
In 2009 and 2020 the national industrial figures were rising again within a year, and after 2020 value passed its pre-pandemic level in 2021 and the number of deals in 2022. The 1998 fall was much deeper, and the reports cited here show house prices still falling in the first half of 1999 with no separate industrial recovery date. Each downturn had a different cause, so none of this is a forecast.
National recovery also does not mean every estate or factory type recovered. In the JPPH-registered deals compiled on our Selangor and Kuala Lumpur transaction pages, like-for-like detached factory prices moved -4% across 13 parks in the 12 months to August 2026, while terrace factory prices moved +8% across 91 parks. Our guide to industrial area price growth in Selangor shows which areas rose and which fell since 2021.
Is a factory good for long holding?
It can be, when the next owner is easy to find. What decides it:
- Tenure. Freehold, or a lease with many years left. A leasehold loses years every year you hold it, and many leasehold industrial titles need state consent to transfer or charge, which adds time to any sale.
- A general purpose building. NAPIC defines a factory as either designed for a general manufacturing process and normally for sale or letting, or purpose built for a specialised process. A plant built around one process has fewer buyers.
- An estate with steady registered deals. Check how many deals of your type were recorded in the park. In Selangor and Kuala Lumpur, JPPH-registered data shows 1759 terrace factory deals in 24 months against 306 detached factory deals, with a detached factory median of RM10 million (RM281 psf of land). Fewer deals means fewer comparable buyers when you sell.
- Supply around you. New factories in the same district compete with yours for tenants and buyers; see what NAPIC stock and new supply figures show.
- Rent that covers holding costs in a slow year: loan instalments, quit rent, assessment and insurance, with a margin for a vacant period.
How do you plan the exit from a factory investment?
Decide the exit before you sign. The checks below are the ones that change what you can sell for and how fast.
Name the next buyer
Ask who would buy your factory if you had to sell in a slow year. In NAPIC's records terraced factories and warehouses are the most traded industrial type: 1,548 of 4,648 industrial deals in the first half of 2010, and 33.3% of all industrial deals in 2025. A large detached factory or a big land parcel has a smaller pool, so it needs more time and more cash behind it.
Match the holding period to RPGT
Real Property Gains Tax falls with the years held (LHDN RPGT guide):
| Year of disposal | Company incorporated in Malaysia | Malaysian citizen | Non-citizen, or company not incorporated in Malaysia |
|---|---|---|---|
| Within 3 years | 30% | 30% | 30% |
| 4th year | 20% | 20% | 30% |
| 5th year | 15% | 15% | 30% |
| 6th year onwards | 10% | Nil | 10% |
The buyer must also retain and pay 3%, 5% or 7% of the price (or all the money paid, whichever is lower) to LHDN within 60 days of disposal. Details are in our RPGT guide for factories.
Keep enough cash to wait
A factory sale takes months even in a normal market; see how long it takes to sell a factory. In the records above, the number of deals fell between 24% and 48% in a bad year, so plan for a longer sale and keep reserves for instalments and holding costs.
Keep the factory sellable
Approvals in place, no unapproved extensions, a clean title and a tenancy that a buyer can live with. Whether to sell with the tenant or vacant, and why a factory is not selling, are covered in separate guides; Jason Low's guide on selling with a tenant or vacant also explains who buys each.
What are the main risks of factory investment?
- Liquidity. Fewer buyers in a downturn, as the 24% to 48% falls in deal numbers show.
- Vacancy and one tenant. A factory is often let to a single tenant; when it leaves, all income stops until the next one moves in.
- A building made for one user. Special fit-out, cranes or process structures help the first user and may mean nothing to the next.
- Tenure running down. Fewer lease years means fewer lenders and buyers, and consent adds time.
- Compliance gaps. Missing approvals or unapproved extensions can stop a buyer's bank from lending.
- Interest rates. Loan costs move with the policy rate, which Bank Negara cut by 150 basis points in 2008 and 2009 and can raise as well.
- Prices move by estate and type. As the -4% detached and +8% terrace figures show, the national trend can hide a fall in your segment.
This guide is general information, not legal, tax or investment advice.
Frequently Asked Questions
Do industrial property prices fall in a recession?
Transactions fall first and hardest. In 1998 industrial deals in Malaysia fell 48.1% in number and 55.5% in value, and in 2020 they fell 24.0% and 14.0%. Whether a particular factory's price falls depends on its estate, type and tenure, so check registered deals for the same type in the same park.
Are industrial properties a good investment?
They can be for patient investors with cash reserves. NAPIC recorded rising industrial deal values every year from 2021 to 2025, but the records also show deep falls in 1998 and 2020. The investment works when the factory is easy to sell or let to the next user, the tenure is long and the holding costs are covered.
How long does industrial property take to recover after a recession?
In the records, industrial deals in the first half of 2010 were up 29.3% on the first half of 2009, and national industrial deal value in 2021 was already above 2019. After 1998 the fall was deeper and the published figures give no separate industrial recovery date. Past timelines are not a forecast.
Is NAPIC data the same as JPPH data?
NAPIC, the National Property Information Centre, is part of JPPH, the Valuation and Property Services Department under the Ministry of Finance. NAPIC publishes the national transaction totals and reports, while individual registered transfers by estate come from JPPH records.
Did Bank Negara's 1997 property lending curbs cover factories?
No. When banks were told in April 1997 to keep lending to certain property sub-sectors within 20% of their total loans, lending for industrial factories and buildings was excluded. Future measures may differ.
What is the main risk when investing in a factory?
For most investors it is time: a factory with one tenant can sit empty, and in a downturn there are fewer buyers. Keep enough cash to cover instalments and holding costs through a long vacancy or a slow sale.
Should I sell my factory when the market is slow?
It depends on your cash needs, your RPGT year and how active buyers of your factory type are in your estate. A company selling in the 4th year pays 20% RPGT against 10% from the 6th year, so the holding year alone can change the decision.
FactoryHub is dedicated to helping every client find the right factory or warehouse. To talk through buying, holding or selling an industrial property, call Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.
