Key Takeaways

  • Decide on net yield, not gross. Net yield is the yearly rent minus outgoings and empty months, divided by the price plus stamp duty and legal fees. Cap rate is net operating income divided by value, and payback is total cost divided by yearly net income.
  • A RM5 million factory on registered figures: the JPPH-registered median semi-detached factory in Klang and Port Klang sold for RM5 million, and the median registered semi-detached rent there is RM15,000 a month. That is 3.6% gross on the price, 3.44% on the RM5,235,250 total cost, and 29.1 years of rent to pay back before any outgoings.
  • The loan decides the cash flow: at Bank Negara's average lending rate of 4.54% (June 2026), RM15,000 a month covers the instalments on about RM2.36 million over 20 years. Borrow 70% of RM5 million over 20 years and the rent falls RM86,620 a year short before outgoings.
  • Empty months cost more than people expect: three empty months after every 24-month tenancy cut the rent collected by 11%, from RM180,000 to RM160,000 a year.
  • A long lease to a strong tenant is valued on income: value equals net income divided by the cap rate. Two fully let Selangor industrial assets bought by Axis REIT in 2026 were priced at gross initial yields of about 6.2% and 6.6%. Nothing in this guide is a promised return.

This guide is for buyers, owners and investors weighing a factory or warehouse in the RM3 million to RM20 million range who want the full calculation before they sign. It goes beyond the two basic formulas in our rental yield primer and works every step on JPPH-registered figures, current lending rates and the statutory fee scales. It explains arithmetic and rules; it is not financial, legal or tax advice, and it promises no return.

What formulas do you need to calculate factory rental yield?

Six measures answer almost every investor question. Work them in this order, because each one feeds the next.

Measure Formula What it tells you
Gross yield Yearly rent ÷ purchase price × 100 A first screen, nothing more
Net yield (Yearly rent minus outgoings minus allowance for empty months) ÷ (price + stamp duty + legal fees) × 100 What the factory earns on what you actually paid
Cap rate Net operating income ÷ market value × 100 How valuers and institutional buyers price a let property
Payback (Price + buying costs) ÷ yearly net income Years of rent needed to recover your outlay
Cash-on-cash return (ROI) (Net income minus yearly loan instalments) ÷ your own cash in × 100 The return on your money when you borrow
Total return Net income + change in value Yield plus or minus capital growth

Two rules keep the numbers honest:

  1. Rent and price are measured on different areas. Rent is quoted per sq ft of floor area a month. JPPH-registered sale prices per sq ft are per sq ft of land. Never divide a rent psf by a sale psf.
  2. Net operating income is before the loan. Loan repayments enter only at the cash flow and ROI step, so two buyers of the same factory share one net yield but get different cash flows.

What yield do Klang Valley factories typically give, and what is a good yield?

There is no official published yield for factories, so set registered rents against registered prices for the same factory type. JPPH-registered deals in the 24 months to August 2026 (Klang and Port Klang transaction prices and rents) give these semi-detached figures:

Area Median semi-detached price Median semi-detached rent Rent × 12 ÷ price
Klang and Port Klang RM5 million (172 deals), RM337 psf of land, median land 15,861 sq ft RM15,000 a month for about 8,630 sq ft (119 tenancies) 3.6%
Shah Alam RM5.92 million (66 deals), RM514 psf of land RM17,300 a month for about 8,810 sq ft (24 tenancies) 3.5%
Selangor and Kuala Lumpur RM4.9 million (725 deals), RM375 psf of land RM12,900 a month for about 7,960 sq ft (316 tenancies) 3.2%

These are ratios of two medians drawn from different buildings, so treat them as a range to test a deal against, not as the yield of any unit.

What counts as a good yield?

A yield is good or bad only against your cost of money and your alternatives. Bank Negara held the Overnight Policy Rate at 2.75% on 5 November 2026 (BNM monetary policy statement). In June 2026 the average lending rate on outstanding commercial bank loans was 4.54% and 12-month fixed deposits averaged 2.22% (BNM interest rate data on data.gov.my). Analysts expected Axis REIT, a listed industrial REIT, to pay a dividend yield of around 5% to 5.5% (The Star, 3 August 2026).

Read together: a factory at 3% to 4% gross beats a fixed deposit before costs but sits below the loan rate, so it suits a buyer who pays mostly in cash, plans to hold for a long time or wants the land. A buyer who needs the rent to carry a large loan has to find a higher rent, a lower price or a longer tenancy.

Worked example: what does a RM5 million factory really earn?

Take the registered medians for a semi-detached factory in Klang and Port Klang: price RM5 million, rent RM15,000 a month (RM180,000 a year), typical registered term 24 months.

Step 1: add the buying costs

  • Stamp duty on the transfer under item 32(a) of the First Schedule to the Stamp Act 1949: RM1 per RM100 on the first RM100,000, RM2 on the next RM400,000, RM3 on the next RM500,000 and RM4 above RM1 million, on the price or market value, whichever is higher.
  • Legal fee on the SPA under the Solicitors' Remuneration Order 2023 (P.U.(A) 207): 1.25% of the first RM500,000, 1% of the next RM7 million, and above RM7.5 million a negotiated fee of not more than 1% of the excess. Disbursements are extra.
Item RM5 million factory RM10 million factory
Stamp duty on the transfer RM184,000 RM384,000
Legal fee on the SPA (scale) RM51,250 RM76,250, plus up to RM25,000 negotiated
Total before any loan costs RM5,235,250 RM10,460,250 to RM10,485,250

Our legal fees and stamp duty calculator runs these for any price.

Result: 3.6% gross on the price becomes 3.44% on the total cost (RM180,000 ÷ RM5,235,250), and payback on gross rent is 29.1 years.

Step 2: take off the owner's outgoings

Most factory tenancies leave the landlord with the land and building costs, but the tenancy decides who pays what.

Outgoing Where the real figure comes from
Quit rent (cukai tanah) The yearly bill from the land office for that title
Assessment (cukai taksiran) The council's bill, a percentage of the annual value the council sets
Fire insurance on the building Your insurer's quote, which depends on what the tenant does inside
Roof, structure, drains and external works The repair clause, and the age of the roof and drains
Service charge Only in managed or gated parks
Letting costs The agent's fee and any tenancy legal costs you agree to bear at each new letting
Rent-free fit-out months Whatever you grant at the start of each tenancy

The SRO 2023 sets the solicitor's fee for a tenancy agreement with rent above RM10,000 a month at not less than 15% and not more than 25% of one month's rent; the tenancy decides who pays it.

On this example, every RM10,000 a year of outgoings lowers net yield by 0.19 percentage points and stretches payback from 29.1 to 30.8 years. Use your own bills; never borrow another unit's percentage.

Service tax on rent, where the landlord is registered, is billed to the tenant on top of the rent and paid over to Customs, so it is not part of your yield. Income tax is: every yield in this guide is before tax, and the rate differs for an individual and a company.

Step 3: allow for empty months

With the registered typical term of 24 months, work out the rent over a full cycle of tenancy plus gap:

Empty months after each 24-month tenancy Rent collected a year Yield on RM5,235,250 Payback on gross rent
None RM180,000 3.44% 29.1 years
1 month RM172,800 3.30% 30.3 years
3 months RM160,000 3.06% 32.7 years
6 months RM144,000 2.75% 36.4 years

During a gap you still pay quit rent, assessment, insurance and any loan. Even a professionally run portfolio carries empty space: Axis REIT reported 94% occupancy and a weighted average lease expiry of 4.4 years at 31 December 2025 (The Star).

What decides vacancy for your unit: how many tenants in that estate can use the building (power, clear height, floor loading, container access), the remaining term and any renewal option, and whether the building is in letting condition today.

An investor and a factory owner work out the rent and costs of a semi-detached factory
IllustrationAn investor and a factory owner work out the rent and costs of a semi-detached factory

How much rent does a RM10 million factory collect?

Rent follows the built-up area you can let, not the price. The JPPH-registered median detached factory in Selangor and Kuala Lumpur sold for RM10 million (306 deals in 24 months, RM281 psf of land, median land 38,865 sq ft). Registered detached rents had medians of RM1.38 psf a month in Selangor and KL and RM1.22 psf a month in Klang and Port Klang.

Built-up let Rent at RM1.38 psf Gross yield on RM10 million Rent at RM1.22 psf Gross yield on RM10 million
20,000 sq ft RM27,600 a month 3.31% RM24,400 a month 2.93%
30,000 sq ft RM41,400 a month 4.97% RM36,600 a month 4.39%
40,000 sq ft RM55,200 a month 6.62% RM48,800 a month 5.86%

Turn it round to test an asking price: for a 5% gross yield on RM10 million (RM500,000 a year), the building must let about 30,200 sq ft at RM1.38 psf. If the approved built-up is much smaller, the price is being paid for land, location or owner-occupier use, not for rent. That can still be a sound purchase, but it is not an income purchase.

Will the rent cover the loan? Cash flow, ROI and payback

At current rates, a factory let at registered median rents rarely covers a large loan. Positive cash flow comes from a bigger down payment, a longer tenure or a higher rent. The table uses the RM5 million example (rent RM180,000 a year) and the 4.54% average lending rate; your own rate depends on your company's accounts, the property and the loan size.

Loan Tenure Monthly instalment Yearly instalments Rent against instalments, before outgoings
RM3.5 million (70%) 20 years RM22,218 RM266,620 RM86,620 short
RM3.5 million (70%) 25 years RM19,534 RM234,404 RM54,404 short
RM3.5 million (70%) 30 years RM17,817 RM213,807 RM33,807 short
RM2.5 million (50%) 20 years RM15,870 RM190,443 RM10,443 short
RM2.5 million (50%) 25 years RM13,953 RM167,432 RM12,568 surplus
RM2.5 million (50%) 30 years RM12,727 RM152,719 RM27,281 surplus
  • Break-even loan: RM15,000 a month pays the instalments on about RM2.36 million over 20 years, RM2.69 million over 25 years or RM2.95 million over 30 years, before outgoings and empty months.
  • A shortfall is not a loss. In year one of the RM2.5 million, 20-year loan, RM78,565 of the RM190,443 paid reduces the loan and RM111,879 is interest. You still have to fund the gap every month.
  • Rates move the whole table. Each RM1 million borrowed over 25 years costs RM5,006 a month at 3.5%, RM5,581 at 4.54% and RM6,141 at 5.5%. Try your own figures in the factory loan calculator.
  • ROI with a loan: with the 50% loan over 30 years, your cash in is about RM2,747,750 (RM2.5 million down payment, RM184,000 stamp duty, RM51,250 legal fee and RM12,500 loan stamp duty at RM5 per RM1,000 under item 27 of the Stamp Act, before the bank's legal fees). The RM27,281 surplus is about 1% on that cash before outgoings, against 3.44% if you paid cash. Borrowing lifts your return only when the property's yield is above the loan rate.

What is a cap rate, and how is a factory let to a listed company valued?

A cap rate is net operating income divided by value. Valuers price a let factory by the investment method: sustainable net income divided by a cap rate drawn from comparable deals. A long lease to a strong tenant carries less risk, so buyers accept a lower cap rate, which means a higher price for the same rent.

The Board of Valuers' standard on valuation methods (published as an exposure draft) sets out what the investment method needs: gross income set by reference to prevailing rents of similar properties, with a statement on whether the rent is sustainable; outgoings supported by evidence; and cap rates supported by rates for comparable properties (Malaysian Valuation Standards, methods of valuation).

How sensitive is value to the cap rate?

On a net operating income of RM1,000,000 a year (an illustration, not a real asset):

Cap rate Value
5% RM20,000,000
6% RM16,666,667
7% RM14,285,714
8% RM12,500,000

Moving from 6% to 7% takes 14.3% off the value; moving from 6% to 5% adds 20%. That is why the lease terms matter as much as the rent.

For leasehold land the remaining term matters too. In simple single-rate arithmetic at 6%, RM1,000,000 a year in perpetuity is worth RM16.67 million, for 60 years RM16.16 million and for 30 years RM13.76 million, about 17% less on the same income. Valuers may use other approaches, but the direction is the same.

What reported deals show

Deal, as reported Price Rent Gross initial yield
Axis REIT buys a fully occupied industrial complex in Shah Alam, 3.03 acres leasehold, about 120,177 sq ft lettable (The Star, 13 May 2026) RM38 million RM210,476.75 a month about 6.6%
Axis REIT buys City-Link Express's distribution centre in Bandar Saujana Putra with a 15-year leaseback, about 355,023 sq ft lettable (The Star, 26 June 2026) RM128 million RM661,878 a month initially, with periodic step-ups about 6.2%

Both are well above the 3% to 4% that registered medians imply for semi-detached factories. One reason is who buys: most semi-detached factories sell to owner-occupiers who pay for the use of the building, while let investment assets are priced on their income.

Checklist for a factory let to a listed company

  • Who signs the lease. In one reported case a Puchong factory was leased for 10 years at an initial RM1.3 million a year, revised every three years, to Ngai Cheong Metal Industries, the company KHPT Holdings proposed to acquire (The Star, 27 April 2026). The tenant is often a subsidiary: ask whether the listed parent guarantees the rent.
  • Unexpired term and break options. A 10-year lease with a break in year three is a three-year lease for valuation risk.
  • Rent review. Fixed steps, market review or none. A rent below market today is upside at review; a rent above market is a risk at renewal.
  • Outgoings. Who pays quit rent, assessment, insurance and repairs decides the net income being capitalised.
  • Registration. A lease of more than three years must be granted by an instrument in Form 15A under section 221 of the National Land Code (Act 828), for up to 99 years over a whole lot or 30 years over part of it. Check it on the title search, and read our guide to buying a factory with a tenant.
  • How specialised the building is. Cleanrooms, heavy crane bays and process fit-outs suit one tenant well and the next tenant poorly.
  • The tenant's accounts. Listed companies publish annual reports through Bursa Malaysia; read the segment that uses your factory.

Does capital appreciation make up for a low yield?

Sometimes, but it cannot be assumed. Total return is net income plus the change in value, and registered like-for-like prices (same park, same type, the 12 months to August 2026 against the 12 before) moved both ways:

Type and area Like-for-like registered price change
Semi-detached, Selangor and KL up 11% across 28 parks
Detached, Selangor and KL down 4% across 13 parks
Semi-detached, Klang and Port Klang up 21% across 8 parks
Detached, Klang and Port Klang down 5% across 5 parks
Semi-detached, Shah Alam down 32% across 3 parks

Rents moved as well: in Selangor and KL, like-for-like registered detached rents rose 16% across 16 parks and semi-detached rents fell 11% across 5 parks, year on year. Samples of three to eight parks swing sharply, and none of this is a forecast. A gain on sale is also subject to real property gains tax, which differs for a company and an individual.

A valuer inspects a fully let distribution warehouse with lorries at every loading dock
IllustrationA valuer inspects a fully let distribution warehouse with lorries at every loading dock

Which mistakes make a factory yield look better than it is?

  • Dividing a registered median rent by a registered median price as if they were the same building.
  • Treating a land psf as a built-up psf.
  • Leaving stamp duty and legal fees out of the cost.
  • Assuming no empty months and no re-letting costs.
  • Using the OPR or a promotional rate as the loan rate.
  • Relying on a tenant's name instead of the lease: a subsidiary with a break clause is a weaker covenant than the group's logo suggests.
  • Accepting a seller's "guaranteed" yield: ask for the signed, stamped tenancy and the rent receipts.

For the same sums worked on Shah Alam, Rawang and Serendah figures, see Jason Low's factory rental yield calculation guide on klangindustrial.my. Related questions such as selling a factory vacant or tenanted, renting versus buying and industrial prices in a downturn are covered in separate FactoryHub guides.

Costs, tax and financing: more questions

How many years does it take to pay back a factory from rent?

Divide the total cost by the yearly net rent. A RM5 million factory let at RM15,000 a month needs 29.1 years of gross rent to recover RM5,235,250, and 32.7 years if it stands empty for three months after each two-year tenancy. Outgoings and loan interest make it longer.

How much rent can a RM5 million factory collect?

As much as its lettable built-up area times the market rent per sq ft, which is why two RM5 million factories can earn very different rents. In Klang and Port Klang the median registered semi-detached rent is RM15,000 a month for about 8,630 sq ft, or RM1.78 psf a month.

Is rental income from a factory taxed in Malaysia?

Yes. Rent less allowable expenses is taxed at the owner's income tax rate, which differs for an individual and a company, so every yield in this guide is before tax. Ask your tax adviser how it applies to your ownership structure.

Practical steps: more questions

Does a listed company as tenant make the factory worth more?

It can lower the cap rate a buyer or valuer applies, which raises the value, but only when the lease itself is strong: a long unexpired term, no easy break, clear rent reviews and the right entity signing. Check whether the lessee is the listed company or a subsidiary, and whether the parent guarantees the rent.

Frequently Asked Questions

I want to buy a factory to rent out with a RM10 million budget. Where is it easier to find good tenants?

Where tenant demand is deepest. In JPPH-registered data for the 24 months to August 2026, Klang and Port Klang recorded 780 factory tenancies, including 301 for detached factories, against 119 in Shah Alam. RM10 million is the median detached factory in Selangor and KL, and rent follows the built-up you can let: for a 5% gross yield the building must let about 30,200 sq ft at the RM1.38 psf median detached rent. Good tenants follow good specs, so pick a building with power, height, floor loading, container access and a CCC that suit many users.

How is the capital appreciation of a factory calculated?

Capital appreciation is the current market value minus what the factory cost you, divided by that cost. Use the full cost (price plus stamp duty and legal fees, plus any capital works), and take today's value from JPPH-registered sales of the same type in the same estate or from a registered valuer, not from asking prices. To compare holding periods, work out the yearly rate: (value ÷ cost) to the power of (1 ÷ years), minus 1. Total return adds the net rent, and any gain on sale is subject to RPGT.

How does vacancy affect the return on a factory investment?

Every empty month cuts the rent you collect, while quit rent, assessment, insurance and any loan instalments carry on. On a RM5 million Klang semi-detached factory let at RM15,000 a month on a typical 24-month tenancy, three empty months after each tenancy cut the yearly rent from RM180,000 to RM160,000 and the yield on total cost from 3.44% to 3.06%. How long your unit stays empty depends on how many nearby tenants can use the building (power, height, floor loading, access) and on its condition.

Should I buy a factory to rent out, or hold it and wait for its value to rise?

Renting it out is usually the sounder plan: a factory's total return is rent plus any change in value, and only the rent can be checked before you buy. Growth is not assured. In the 12 months to August 2026, like-for-like JPPH-registered semi-detached factory prices rose 11% across Selangor and KL, while detached factory prices fell 4%. A factory left empty still costs quit rent, assessment, insurance and any loan instalments, and a gain on sale is subject to RPGT.

What is the average rental yield for a factory in Malaysia?

No official average yield is published for factories. On JPPH-registered medians for the 24 months to August 2026, semi-detached factories work out to about 3.2% gross in Selangor and KL, 3.5% in Shah Alam and 3.6% in Klang and Port Klang. Those are ratios of two medians from different buildings, so calculate the yield on the actual unit.

Is 3.5% a good rental yield for a factory?

It is above the 2.22% average for 12-month fixed deposits in June 2026 but below the 4.54% average lending rate, so a factory at 3.5% gross will not carry a large loan from rent alone. It can still suit an owner who pays mostly cash, holds for the long term or values the land and location.

Is a 6% cap rate good for industrial property?

A cap rate is a price, not a grade: a higher cap rate means a lower price for the same income, usually because the market sees more risk. The two Axis REIT deals reported in 2026 were bought at gross initial yields of about 6.2% and 6.6%, fully let and one on a 15-year leaseback. Compare a cap rate only with deals of similar size, lease length and tenant strength.

How do I calculate ROI on a factory bought with a loan?

Take the yearly rent, subtract outgoings, empty months and the year's loan instalments, then divide by the cash you put in: down payment, stamp duty, legal fees and loan costs. In the RM5 million example with a 50% loan over 30 years at 4.54%, the rent exceeds the instalments by RM27,281 a year before outgoings, about 1% on RM2,747,750 of cash.

FactoryHub is dedicated to helping every client find the right factory or warehouse. For a yield check on a tenanted factory, a valuation question or an investment purchase, call Peter Tan (REN 12771) at 016-666 6872, or Jason Low (PEA 1478) at 012-288 1834 for Klang.