Key Takeaways
- Built-up area is the floor area of the building; land area is the size of the lot on the title. Under the Town and Country Planning Act 1976 (Act 172), floor area is measured between the external sides of the walls, and the building plot between the survey boundary lines.
- Factory rent is quoted per sq ft of built-up (floor) area per month, with the land, yard and car park included. Across 2,487 JPPH-registered factory tenancies in Selangor and Kuala Lumpur over the 24 months to August 2026, the median was RM1.54 psf/month of rented floor area.
- Registered sale prices of landed factories are compared per sq ft of land. Medians in the same data: terrace factory RM518, semi-detached RM375 and detached RM281 psf of land. A lower land psf is not a cheaper factory: the detached median price was RM10 million against RM4.9 million for a semi-D.
- To compare two units fairly, work out both bases plus site coverage. Price or rent per sq ft of built-up, price per sq ft of land, and footprint ÷ land. Selangor's planning manual sets a 60% plinth (site coverage) for detached and semi-D factories.
- Office share has two limits worth knowing. Selangor's manual treats up to 30% of gross floor area as office in detached and semi-D factories, and for Industrial Building Allowance a non-industrial part such as an office still qualifies only if it costs no more than 10% of the building (LHDN Public Ruling No. 3/2018).
When you shortlist factories in the RM3 million to RM20 million range, or rents of five figures a month, the first trap is comparing one unit's price per square foot of land with another's price per square foot of building. This guide sets out what each area means in law, how rents and registered prices are actually quoted, how to put two units side by side, and how much of the building can be office.
What is the difference between built-up area and land area?
Built-up area tells you how much building you get. Land area tells you how much ground comes with it. Every landed factory has both, and the gap between them (yard, setbacks, car park, drains) is what makes two units of the "same size" work very differently.
Built-up area (floor area)
Built-up area, also called gross floor area, is the total floor space inside the building on every level. Act 172 defines floor area as "the total area of floor space within a building, as measured between the external sides of walls or, in the case of party walls, between the centres of such walls". For a factory this means:
- The production floor, the office block and every upper floor count.
- A mezzanine adds floor area. Act 172 lists "any increasing of the height or floor area of a building" as a building operation, so a new mezzanine needs approval like any other extension.
- In a semi-D, the shared wall is measured to its centre line.
- Open-sided canopies, guardhouses, pump rooms and bin centres are often listed separately. Ask whether the built-up figure you are quoted includes them.
Rely on the figure in the approved building plans, not on a brochure or an advert.
Land area
Land area is the area of the lot registered on the title. Act 172 measures the building plot "between the survey boundary lines or, if there are no survey boundary lines, between the provisional boundary lines". Check the unit on the title before you convert:
| Unit on the title | In square feet |
|---|---|
| 1 square metre | 10.764 sq ft |
| 1 hectare (10,000 sq m) | 107,639 sq ft |
| 1 acre | 43,560 sq ft |
Site coverage and plot ratio link the two
- Site coverage (plinth area) is the building footprint as a share of the land. The Selangor planning manual defines the plinth area as the part of a lot covered by buildings and sets 60% for detached and semi-D factories, with setbacks of 40 ft facing a road and 25 ft at the side and rear. The fourth edition approved by the state in 2022 keeps the same 60% figure.
- Plot ratio is total floor area on all floors divided by land area. Subang Jaya's local plan, for example, sets 1:3 for detached factories and 1:2 for semi-D factories, both with a 60% plinth (MBSJ development guidelines, RTSJ 2035). Our plot ratio guide explains how to find the figure for a lot.
| Term | What it measures | Where to check it |
|---|---|---|
| Land area | Lot size between survey boundary lines | Title and certified survey plan |
| Built-up area | Floor space on all levels, to the external walls | Approved building plans |
| Site coverage (plinth) | Ground-floor footprint ÷ land area | Approved plans; council planning standards |
| Plot ratio | Total floor area ÷ land area | Local plan for the lot |
A terrace factory covers most of its lot, while a detached factory sits back from its boundaries. That is why a detached factory carries far more land per square foot of building, and why the two types cannot be compared on one psf figure. The detached vs semi-D vs terrace guide compares the types in detail.
Is factory rent based on land or built-up area?
Built-up. Rent for a factory or warehouse is quoted per square foot of built-up area per month, and the land, yard and parking are part of what that rent buys rather than a separate charge per square foot. FactoryHub's analysis of JPPH-registered tenancies works the same way: rent per sq ft of rented floor area per month. The exception is vacant land or an open yard leased on its own, where there is no building and the rent can only be set against land area.
Registered factory tenancies in Selangor and Kuala Lumpur, 24 months to August 2026 (industrial transactions):
| Factory type | Tenancies | Median rent psf/month | Median monthly rent | About |
|---|---|---|---|---|
| Terrace factory | 1,084 | RM1.62 | RM3,700 | 2,000 sq ft |
| Semi-detached factory | 316 | RM1.75 | RM12,900 | 7,960 sq ft |
| Detached factory | 743 | RM1.38 | RM12,500 | 8,220 sq ft |
Size moves the rate more than type does. The same registered data by floor area:
| Rented floor area | Tenancies | Median psf/month | Median monthly rent |
|---|---|---|---|
| Under 3,000 sq ft | 1,281 | RM1.71 | RM3,000 |
| 3,000 to 10,000 sq ft | 728 | RM1.57 | RM8,400 |
| 10,000 to 30,000 sq ft | 296 | RM1.27 | RM20,300 |
| 30,000 to 60,000 sq ft | 98 | RM1.22 | RM48,700 |
| 60,000 sq ft and above | 84 | RM1.13 | RM101,500 |
What a rent per square foot does not show
- The yard. Two 20,000 sq ft factories at the same psf can come with very different land. The yard is not in the psf, yet it decides container turning, loading and room to expand.
- The office and mezzanine. If the quoted built-up includes a mezzanine office, the production floor is smaller than the headline figure.
- How the area was measured. The tenancy agreement should state the area. If the advert's built-up is larger than the approved plans, find out why before you sign.
Area-by-area rents are in our factory rent per square foot guide.
Should a factory be valued on land or built-up area?
For registered sales of landed factories, the comparison basis is land. FactoryHub's transaction pages compute every psf as transacted price ÷ land area, because the land area is fixed on the title while the built-up area in the registered records is often missing or inconsistent. A valuer still inspects the building (age, condition, approved floor area, specs) and adjusts for it, and the valuation ends as a total figure, not a psf.
JPPH-registered sales in Selangor and Kuala Lumpur, 24 months to August 2026:
| Type | Registered deals | Median price | Median land | Median price psf of land |
|---|---|---|---|---|
| Terrace factory | 1,759 | RM1.17 million | 2,002 sq ft | RM518 |
| Semi-detached factory | 725 | RM4.9 million | 12,350 sq ft | RM375 |
| Detached factory | 306 | RM10 million | 38,865 sq ft | RM281 |
| Warehouse | 41 | RM8.7 million | 65,208 sq ft | RM170 |
| Industrial land | 603 | RM4.6 million | 79,222 sq ft | RM69 |
The pattern is clear: the bigger the lot and the lower the coverage, the lower the price per square foot of land, while the total price climbs. So compare land psf only within the same factory type and area. Two semi-Ds on identical lots can still register very different prices because of the building itself: its age, condition, approved floor area, power supply and specs.
Splitting the price between land and building
The split matters for tax. Under LHDN Public Ruling No. 3/2018, Industrial Building Allowance is claimed on the building only; the purchase price "does not include the price of any land". If the sale and purchase agreement does not separate the two, the buyer needs a valuation from JPPH or a professional valuer to apportion them. Ask for the split before you sign. Our factory valuation guide covers the valuation methods.
How do you compare two factories fairly?
- Collect the same facts for both. Land area from the title, built-up area from the approved plans (split into production, office and mezzanine), the price or rent, and the tenure.
- Work out four numbers. Price or rent per sq ft of built-up; price per sq ft of land; site coverage (ground-floor footprint ÷ land); and the share of built-up that is production floor.
- Benchmark against the right registered figure. Sales by price per sq ft of land for the same type and area; rents by price per sq ft of floor area for the same size band.
- Adjust for what the ratios miss. Power supply, clear height, floor loading, yard depth, tenure and CCC can outweigh a few sen per square foot.
- Check the numbers against approvals. Coverage above the 60% Selangor standard on a detached or semi-D, or a built-up larger than the approved plans, needs an explanation before you commit.
A worked illustration (hypothetical units, not real listings)
| Unit A | Unit B | |
|---|---|---|
| Land area | 43,560 sq ft (1 acre) | 25,000 sq ft |
| Ground-floor footprint (production) | 18,000 sq ft | 16,000 sq ft |
| Mezzanine office | 2,000 sq ft | 4,000 sq ft |
| Built-up area | 20,000 sq ft | 20,000 sq ft |
| Site coverage | 41% | 64% |
| Office share of built-up | 10% | 20% |
At the same rent per square foot both cost the same each month, yet Unit A gives 2,000 sq ft more production floor and 74% more land. Unit B's 64% coverage is above the 60% standard, so ask for its approved plans first.
How much of a factory can be office?
In Selangor, the planning manual treats up to 30% of gross floor area as office space in detached, semi-D and flatted factories. Within that ceiling, size the office from the people who actually sit there and keep the rest for production and storage.
The rules that shape the split
| Rule | What it says | Source |
|---|---|---|
| Office share | Up to 30% of gross floor area treated as office (detached, semi-D, flatted factories) | Selangor planning manual |
| Car parks | 1 bay per 500 sq ft of office, 1 per 1,000 sq ft of production, 1 per 2,500 sq ft of store, plus visitor bays | Selangor planning manual |
| High-technology lots in Subang Jaya | Office below 45% of floor space | MBSJ RTSJ 2035 |
| Industrial Building Allowance | A non-industrial part (such as an office) counts as industrial building if it costs no more than 10% of the whole building | LHDN PR No. 3/2018, para 9 |
| Adding office floor | Increasing floor area is a building operation and needs planning permission | Act 172, s.19 |
Two practical effects follow. Office space needs twice as many car bays per square foot as production space, so turning production floor into office can run into the parking standard. And for an owner claiming Industrial Building Allowance, the ruling apportions the office by construction cost, floor area or another fair method; in its own example an office block at 5.8% of the total cost still qualified. This guide explains planning and tax rules in general terms and is not legal or tax advice.
How to decide the split
- Count staff who work at desks, plus meeting, QC and server rooms. That is your office brief.
- Put the office on a mezzanine only if the mezzanine is approved, because it adds floor area.
- A tenant pays the same rent per square foot on office and production floor, so an oversized office simply buys less production space for the same money.
What are registered prices and rents based on?
FactoryHub's figures come from transfers and tenancies registered with JPPH, aggregated into medians. Every sale psf is transacted price ÷ land area, for factories and land alike. Rents are per sq ft of rented floor area per month. Stratified factories have no land of their own, so they are shown by price only. The data covers registered deals available so far, not every unit sold or rented, and the latest months are still being lodged. Use it to benchmark: sales against land psf in the same type and area, rents against floor-area psf in the same size band, and never a land psf against an asking price per square foot of building.
Which costs follow the land and which follow the building?
| Item | Follows | Why |
|---|---|---|
| Assessment rates | Rental value, where the council rates on annual value | Act 171 sets "annual value" as the estimated gross annual rent; rates under s.127 may not exceed 35% of it |
| Industrial Building Allowance | Building only | Land is excluded from the qualifying cost (PR No. 3/2018) |
| Future expansion | Land | Plot ratio and plinth limits are set against land area |
| Rent | Built-up | Quoted per sq ft of floor area, land included |
Separate FactoryHub guides cover factory rent budgets by size, whether an asking price is fair, clear height versus ceiling height, mezzanine approval and how big a factory fits on 1 acre.
Frequently Asked Questions
What is the difference between built-up area and land area?
Built-up area is the total floor space of the building on all levels, measured to the external walls under Act 172. Land area is the size of the lot on the title, measured between the survey boundary lines. A factory on a large lot with a small building has a big gap between the two, which shows up as yard, setbacks and parking.
Is factory rent based on land or built-up area?
Factory rent is quoted per square foot of built-up area per month, and the land and yard come with it. JPPH-registered tenancies in Selangor and Kuala Lumpur had a median of RM1.54 psf/month of rented floor area over the 24 months to August 2026. Only vacant land or an open yard rented on its own is priced against land area.
Should a factory be valued on land or built-up?
Registered sales of landed factories are compared per square foot of land, within the same factory type and area, and a valuer then adjusts for the building's age, condition and specs. The final valuation is a total figure. For tax, the land and building parts must be split, by the agreement or by a valuer.
How do I split production and office area in a factory?
Start from headcount and the rooms you need, then check the limits: Selangor's planning manual treats up to 30% of gross floor area as office in detached and semi-D factories, and office needs one car bay per 500 sq ft. If you claim Industrial Building Allowance, an office costing more than 10% of the building no longer counts as part of the industrial building.
What does "land area" mean on a factory title?
It is the area of the lot as registered, measured between the survey boundary lines. Check the unit stated on the title: 1 hectare is 107,639 sq ft, 1 acre is 43,560 sq ft and 1 square metre is 10.764 sq ft.
What is the difference between carpet area and built-up area?
Carpet area is a term used mainly in India for the usable floor inside the walls. Malaysian factory deals use built-up area, measured to the external walls, so walls, columns, staircases and toilets are inside the figure. If usable space matters, measure the clear production floor yourself.
Does a mezzanine count as built-up area?
Yes. A mezzanine is floor space within the building, so it adds to built-up area and to plot ratio. Under Act 172 increasing the floor area of a building is a building operation, so a mezzanine needs approval.
Why is the price per square foot of a detached factory lower than a semi-D?
Because the psf is per square foot of land, and detached factories sit on much bigger lots with lower coverage. In Selangor and Kuala Lumpur the registered median was RM281 psf of land for detached and RM375 for semi-D, yet the median detached price was RM10 million against RM4.9 million.
FactoryHub is dedicated to helping every client find the right factory or warehouse. To compare two units on land, built-up area and specs, call or WhatsApp Peter Tan (REN 12771) at 016-666 6872.
