Key Takeaways

  • A terrace (link) factory is one unit in a row with shared walls on both sides, a semi-detached (semi-D) factory is one of a pair sharing one wall, and a detached factory stands alone on its own lot with open yard all round.
  • Selangor's planning manual (third edition, 2016) set the minimum lot at 20 ft x 80 ft for a terrace factory, 60 ft x 132 ft for a semi-D, and 0.5 acre (small) or 1 acre (medium to large) for a detached factory.
  • In JPPH-registered deals in Selangor and Kuala Lumpur over the 24 months to August 2026, the median price was RM1.17 million for a terrace factory, RM4.9 million for a semi-D and RM10 million for a detached factory.
  • Power follows TNB's supply scheme, not the building label: up to 100 kVA (about 140A) comes from the existing low voltage network, and a load above 350 kVA needs a new substation built on land the owner provides.
  • Choose by your hardest daily need (lorries and containers, power, open space around the building, distance from neighbours), not by built-up area alone.

What is the difference between a detached, semi-D and terrace factory?

The three names describe how the building sits on its land and how many walls it shares with neighbours. That one difference drives almost everything else: how much yard you get, where lorries stand, how much power can be brought in, and what you pay.

Terrace factories are built wall to wall in a row. In Malaysia "link factory" and "terrace factory" mean the same building type. Each unit sits on its own lot and fronts the estate's service road, so loading happens at the front. End units, often sold as corner lots, also face a side lane, but they still share one wall.

Semi-detached (semi-D) factory

A semi-D is two mirror-image buildings on two lots joined by one shared wall. Each unit has open setback space on its other three sides, which becomes its yard, parking and loading area.

Detached factory

A detached factory is a standalone building on its own lot with setbacks on every side. The yard can take several lorries at once, a guardhouse, and utilities such as a TNB substation.

The planning standards side by side

The Manual Garis Panduan dan Piawaian Perancangan Negeri Selangor, third edition (approved by the state executive council in October 2016), set these standards:

Standard Terrace factory Semi-D factory Detached factory
Minimum lot 20 ft x 80 ft (6.1 m x 24.4 m) 60 ft x 132 ft (18.2 m x 40.2 m) 0.5 acre (small) or 1 acre (medium to large)
Building setbacks Not set per unit; 40 ft (12.2 m) side lanes, back lanes and fire breaks in the layout 40 ft (12.2 m) facing the road, 25 ft (7.6 m) side and rear, 40 ft on a side facing a road Same as semi-D
Building footprint (plinth) Not set per unit 60% of the site 60% of the site
Lorry parking 1 bay for every 5 terrace units 1 bay per 10,000 sq ft (929.9 m²), minimum 2 Same as semi-D
Service road 66 ft (20.1 m) 66 ft (20.1 m) 66 ft (20.1 m)

The same manual caps terrace factories at 40 ft (12.2 m) in height and lets up to 30% of a semi-D or detached factory's gross floor area count as office. Selangor has since approved a fourth edition (2022) and a new six-volume Garis Panduan dan Piawaian Perancangan Negeri Selangor 2025, confirmed on 12 November 2025, with a separate industrial volume. An estate follows the edition in force when its layout was approved, so ask for the approved layout plan or check with the council before relying on any single figure.

How much land and yard do you really get?

Converted to square feet, the minimum lots are 1,600 sq ft for a terrace factory, 7,920 sq ft for a semi-D, 21,780 sq ft for a small detached lot and 43,560 sq ft for a 1 acre lot. Real estates are usually larger than the minimum: the median land area in the registered sales below is 2,002 sq ft for terrace factories, 12,350 sq ft for semi-D factories and 38,865 sq ft for detached factories.

For a semi-D or detached factory, the 60% plinth limit means at least 40% of the lot stays open as setback and yard. That open ground is where lorries turn, wait and load. It is not spare land to build on later: an extension into the setback needs council approval, and an unapproved one becomes a problem when you sell, refinance or apply for a licence.

A terrace unit has almost no private yard. Its working space outside the building is the apron in front and the shared road. One more planning rule explains why mixed estates often include small terrace units: the manual requires developments of more than 50 factory units to provide 30% low-cost factories, and its low-cost terrace standard allows lots of 20 ft x 60 ft.

How do lorries, containers and fire engines get in?

All three types in a planned estate face a 66 ft service road, with 40 ft side lanes, back lanes and fire breaks. The difference is what happens inside your boundary. The Selangor manual sizes a loading area at a minimum of 30 ft x 26 ft, a trailer bay at 14 ft x 59 ft plus 18 m for manoeuvring, and a small lorry bay at 10 ft x 20 ft plus 20 ft.

  • Terrace: a 20 ft frontage takes a small lorry, but a trailer's 18 m of manoeuvring happens on the shared road, and the estate provides only 1 lorry bay per 5 units. Busy mornings mean queuing with neighbours.
  • Semi-D: the 40 ft (12.2 m) front setback is shorter than a 59 ft (17.9 m) trailer bay, so a full trailer standing inside the lot needs the side yard or an angled layout. Walk the yard with your haulier before you sign.
  • Detached: setbacks on every side allow a drive-through or a turning loop on a larger lot, and several bays at once.

Fire access matters more as buildings grow. Under by-law 140 of the Uniform Building By-Laws as amended in 2021, fire appliance access must be at least 6 m wide and built for a stationary 30 tonne fire appliance. For a building over 7,000 m³, the access must front a minimum share of the building's perimeter: one sixth for 7,001 to 28,000 m³, one fourth up to 56,000 m³, one half up to 84,000 m³, three fourths up to 112,000 m³, and an island site above that. As an illustration, a building of 3,000 m² with a 10 m roof height is about 30,000 m³, which falls in the one fourth band. That access eats yard space, which is one reason large buildings sit on detached lots. Each state adopts its own version of these by-laws, so your architect confirms the one in force.

Terrace, semi-detached and detached factory lots side by side, each with a different yard.
IllustrationTerrace, semi-detached and detached factory lots side by side, each with a different yard.

How much power can each type get from TNB?

TNB's Electricity Supply Application Handbook (ESAH 3.1) sets the minimum supply scheme by maximum demand (MD):

Maximum demand Supply Minimum supply scheme
Up to 12 kVA 230V single phase From the existing low voltage network
Over 12 kVA to 100 kVA (non-domestic) 400V three phase From the existing low voltage network, subject to TNB's study
Over 100 kVA to 350 kVA 400V Underground cable from a feeder pillar or a new or existing substation, subject to TNB's study
Over 350 kVA to 1,000 kVA 400V Direct underground cable from a new substation
1,000 kVA up to under 5,000 kVA 11kV Fed through a TNB 11kV switching station

At 400V three phase, 100 kVA is about 140A (TNB's own figure), 350 kVA is about 505A and 1,000 kVA is about 1,440A. You can convert your machine list with the factory power calculator.

What this means for each type:

  • Terrace: units are fed from the estate's low voltage network. A load within 100 kVA is the normal case; above that, TNB studies whether the network can carry it.
  • Semi-D: loads in the 100 to 350 kVA band are decided by TNB's study and may come from a feeder pillar or a substation.
  • Detached: above 350 kVA a new substation is required. The site is prepared and the substation building completed to TNB's specification, then handed over to TNB, so the lot must be able to give up that land.

For any demand above 100 kVA (about 140A), the application is submitted by an Electrical Consultant Engineer registered with the Board of Engineers Malaysia, with a site plan showing the proposed substation site. TNB's typical lead time is less than 3 months for 400V supply without a substation, 3 to 12 months for 400V with a substation, and 6 to 12 months for 11kV, provided the local authority's approvals are not delayed.

What do terrace, semi-D and detached factories cost to buy or rent?

These are JPPH-registered transactions for Selangor and Kuala Lumpur over the 24 months to August 2026. They are the registered records available so far, not every unit sold or rented. Sale prices per sq ft are per sq ft of land, and only comparable within the same type, because lot sizes differ so much.

Type Registered sales Median price Typical range Median land Price per sq ft of land
Terrace factory 1,759 RM1.17 million RM630,000 to RM1.7 million 2,002 sq ft RM518 psf of land
Semi-D factory 725 RM4.9 million RM3.6 million to RM6.65 million 12,350 sq ft RM375 psf of land
Detached factory 306 RM10 million RM6.35 million to RM16.5 million 38,865 sq ft RM281 psf of land
Type Registered tenancies Median rent Median monthly rent
Terrace factory 1,084 RM1.62 psf/month RM3,700 for about 2,000 sq ft
Semi-D factory 316 RM1.75 psf/month RM12,900 for about 7,960 sq ft
Detached factory 743 RM1.38 psf/month RM12,500 for about 8,220 sq ft

Comparing the same parks and the same type, the last 12 months against the 12 before, registered prices moved +8% for terrace factories across 91 parks, +11% for semi-D factories across 28 parks and -4% for detached factories across 13 parks. Browse current detached factories for sale in Selangor, and read our type guides to the semi-D factory and the terrace factory.

Which type suits which operation?

A terrace factory usually fits

  • Workshops, light assembly, repair and servicing, and stock for trading or e-commerce.
  • A power demand within about 100 kVA (about 140A).
  • Deliveries by van or small lorry rather than daily trailers.
  • A first owned premises, where the lower ticket matters more than yard space.

A semi-D factory usually fits

  • A growing manufacturer that needs its own yard on three sides and regular lorry loading.
  • An office component of up to 30% of floor area.
  • Power in the 100 to 350 kVA band, subject to TNB's study.

A detached factory usually fits

  • Heavy machinery, several trailers a day, or 24 hour operations.
  • A maximum demand above 350 kVA, where a new substation and its land are needed.
  • Processes where distance from neighbours matters (fire load, noise, odour), and large buildings that need fire appliance access around more of the perimeter.

Building type does not decide what you may produce. The industry class (light, medium or heavy) and any buffer come from zoning and the Department of Environment, so confirm your activity with the council before you shortlist. If you want to see all three types in one place, Jason Low's guide to Shah Alam Technology Park, Seksyen 33 covers a freehold estate of terrace, semi-detached and detached factories.

Scale model of an industrial estate with terrace, semi-D and detached factories beside a calculator.
IllustrationScale model of an industrial estate with terrace, semi-D and detached factories beside a calculator.

Common mistakes when choosing between them

  1. Comparing price per sq ft across types. A terrace lot and a 1 acre detached lot are priced on very different land sizes; compare within one type.
  2. Looking only at built-up area. Two buildings of the same size can work very differently if one has a 40 ft yard and the other loads from the road.
  3. Assuming power can be raised to any level. Above 350 kVA TNB requires a new substation, and a terrace unit has no land to give.
  4. Treating a corner terrace as a semi-D. It still shares a wall; its advantage is the side lane, not a private yard.
  5. Checking the wrong edition of the rules. An older estate was approved under older standards; the approved plans for that lot decide.
  6. Ignoring the shared wall. A neighbour's fire, water from firefighting, or vibration from heavy machines next door reaches you first in a terrace or semi-D.

This guide explains planning and utility rules in general terms and is not legal or professional advice. Your architect, Electrical Consultant Engineer and the local council confirm what applies to a specific lot.

Practical steps: more questions

What is the minimum land size for a detached factory in Selangor?

Under the third edition of Selangor's planning manual, a small detached factory needs at least 0.20 hectare (0.5 acre) and a medium to large one at least 0.4 hectare (1 acre). Setbacks were 40 ft facing the road and 25 ft at the side and rear, with the building covering at most 60% of the site. Newer editions (2022 and 2025) apply to newer approvals, so check with the council.

Which is cheaper, a semi-D or a detached factory?

On total price, a semi-D usually costs less: JPPH-registered deals in Selangor and Kuala Lumpur over the 24 months to August 2026 show a median of RM4.9 million for semi-D factories against RM10 million for detached factories. Price per sq ft of land should only be compared within one type. Per month, the registered median rent was RM12,900 for a semi-D of about 7,960 sq ft and RM12,500 for a detached factory of about 8,220 sq ft.

Frequently Asked Questions

What are the advantages and disadvantages of a detached factory?

The advantages are no shared walls, open yard on every side for lorries, trailers and parking, and room on the lot for a TNB substation, which a load above 350 kVA needs. The disadvantages are price and land: JPPH-registered sales in Selangor and Kuala Lumpur over the 24 months to August 2026 had a median of RM10 million, against RM4.9 million for a semi-D, Selangor's planning manual set a minimum lot of 0.5 to 1 acre, and fewer buyers can afford one when you resell.

Why do large companies prefer detached factories?

Because a large operation needs what only a standalone lot gives: power, yard and distance. A maximum demand above 350 kVA needs a new TNB substation on land the owner provides, several trailers a day need setbacks on every side to turn and load, and large buildings must give fire engines access along a bigger share of their perimeter. A detached lot also keeps noise, fire load and odour away from neighbours and leaves room for a guardhouse and 24-hour operation.

Is a detached factory worth investing in?

It can be, but it is the most expensive type with the smallest pool of buyers, so the price you pay matters most. In JPPH-registered deals in Selangor and Kuala Lumpur, like-for-like detached factory prices in the 12 months to August 2026 were 4% lower than the year before across 13 parks, while detached rents rose 16% across 16 parks, with a median rent of RM1.38 psf a month. These are past records, not a forecast. Compare deals in the same park and check power, yard and title before you buy.

Which is more worth buying, a terrace factory or a semi-D factory?

Neither wins in general: choose by your operation and budget. A terrace factory costs far less (JPPH-registered median RM1.17 million in Selangor and Kuala Lumpur over the 24 months to August 2026, against RM4.9 million for a semi-D) and suits loads within about 100 kVA and small lorries. A semi-D gives a private yard on three sides, up to 30% of floor area as office and power in the 100 to 350 kVA band, subject to TNB. Like-for-like registered prices rose 8% for terrace and 11% for semi-D factories in the latest 12 months; past data, not a forecast.

What is a detached factory?

A detached factory is a standalone industrial building on its own lot, with no walls shared with neighbours and open setbacks on every side. Selangor's planning manual (third edition) set a minimum lot of 0.5 acre for a small detached factory and 1 acre for a medium to large one. The open yard allows lorry loading, parking and a TNB substation within the lot.

What is the difference between a semi-D factory and a semi-detached house?

Both share one wall with the unit next door, but the land is very different. PLANMalaysia's housing guideline sets a minimum semi-detached house lot of 40 ft x 65 ft, while Selangor's planning manual set 60 ft x 132 ft for a semi-D factory, with a 40 ft front setback and lorry parking. A semi-D factory also sits on industrial land, so it is approved and licensed for industry, not as a home.

Yes. In Malaysia "link factory" and "terrace factory" describe the same thing: factory units built wall to wall in a row, each on its own lot. Selangor's planning manual (third edition) set a minimum terrace factory lot of 20 ft x 80 ft and a maximum height of 40 ft.

Can a terrace factory get 200A?

200A at 400V three phase is about 139 kVA. That is above 100 kVA, the level TNB supplies from the existing low voltage network as a minimum scheme. Between 100 kVA and 350 kVA, TNB decides after a system study whether supply comes from a feeder pillar or a substation, and the application must go through a registered Electrical Consultant Engineer. Check the unit's current meter rating and TNB's reply before you commit.

FactoryHub is dedicated to helping every client find the right factory or warehouse. To compare a terrace, semi-D and detached option side by side for your operation, call Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.