Key Takeaways

  • A factory's asking price is fair when it sits inside the range of JPPH-registered sales of the same factory type in the same estate, after you adjust for land size, frontage, power, age, tenure and CCC. Asking prices on other listings are not evidence; registered sales are.
  • Compare on RM per sq ft of land, not built-up. Registered sale figures are price divided by lot size. In Klang and Port Klang, semi-detached factories sold at a median RM337 psf of land and detached factories at RM270 psf of land in the 24 months to August 2026.
  • Prices inside one estate can differ by millions because no two lots share the same land size, corner or frontage, TNB supply, building age, remaining lease and approvals. A bigger lot usually shows a lower psf of land.
  • There is no official or standard discount. Your room to negotiate is the gap between the asking price and the adjusted registered range, plus the cost of whatever the title search, CCC check, inspection and bank valuation turn up.
  • A factory is undervalued only when it is priced below that adjusted range and nothing in the title, approvals or building explains the gap. Stamp duty is still charged on market value when that is higher than the price you pay.

For a buyer spending RM3 million to RM20 million, "is this price fair?" has a checkable answer. The Malaysian Valuation Standards issued by the Board of Valuers, Appraisers, Estate Agents and Property Managers (BOVAEP) define market value as the estimated amount for which a property should exchange "between a willing buyer and a willing seller in an arm's-length transaction after proper marketing where the parties had each acted knowledgeably, prudently and without compulsion" (MVS 4, BOVAEP). A fair asking price is one close to that figure. This guide shows how to test a seller's number yourself, why two factories in the same estate sell for very different sums, how much room there is to negotiate, and how to tell a real bargain from a factory that is cheap for a reason. It is written for buyers; owners pricing their own factory should read our factory valuation guide.

How do I know if a factory's asking price is reasonable?

Put the asking price next to recent registered sales of the same factory type in the same estate, convert everything to RM per sq ft of land, then adjust for the differences that matter. If the asking price lands inside the adjusted range, it is reasonable. If it sits above the top of the range, the seller has to show what justifies it.

A six-step fair price check

  1. Get the hard facts of the unit. Lot number, land area from the title, built-up area from the approved plans, tenure and lease expiry, TNB supply, and whether every building has a CCC or CF. Without the land area from the title you cannot compare anything.
  2. Pull registered sales of the same type in the same estate. Start with the last 24 months and widen to the neighbouring estate only if there are too few. Terrace, semi-detached, detached, warehouse and vacant land each form their own market.
  3. Remove deals that are not market deals. Market value assumes an arm's-length deal without compulsion, and MVS 5 recognises that some properties "exchange hands at prices which do not reflect Market Value". Transfers between related companies or family members, and sales made under pressure, should not set your benchmark.
  4. Convert to RM psf of land. Divide each registered price, and the asking price, by the land area on the title.
  5. Adjust for differences. A bigger lot, a corner, a wider road, more power, a newer building, a longer lease and full approvals each move value up or down (see the table further down).
  6. Cross-check two ways. Compare with what the factory would rent for using registered rents for the area, and expect the bank's panel valuer to test the price too, because the loan follows the lower of the price and the valuation.

Where can I see what factories in the same estate actually sold for?

In the government's registered transaction records, not in listing ads. Three places to look:

For each comparable, write down the date, factory type, land area, price, RM psf of land, tenure and position in the estate (corner, main road or inner lot). Ask the seller's agent which registered deals were used to set the price. A seller with evidence will share it.

What registered deals show by factory type

JPPH-registered sales, 24 months to August 2026 Median price Typical range Median RM psf of land Median land
Klang & Port Klang, semi-detached factory RM5 million RM3.5 million to RM7.58 million RM337 15,861 sq ft
Klang & Port Klang, detached factory RM14.9 million RM8.65 million to RM19 million RM270 47,318 sq ft
Shah Alam, semi-detached factory RM5.92 million RM4.62 million to RM7.14 million RM514 10,779 sq ft
Shah Alam, detached factory RM16 million RM13.61 million to RM36.2 million RM335 67,901 sq ft
Selangor & KL, warehouse RM8.7 million RM4.5 million to RM17.66 million RM170 65,208 sq ft

These are the JPPH-registered records available so far, not every unit sold. Two things stand out. The same factory type is worth very different amounts per sq ft of land in Shah Alam and in Klang. And inside one area the spread is wide: a semi-detached factory in Klang and Port Klang typically changed hands anywhere from RM3.5 million to RM7.58 million. That is why an area median alone never proves a price is fair; you need the deals in the same estate.

Land psf or built-up psf: which one tells you if a price is fair?

Use RM psf of land to compare a factory with registered sales, and use built-up only as a second check on what you get for the money. Registered sale psf figures are price divided by lot size, so a seller's "psf" on built-up area cannot be set against them. Our built-up area vs land area guide explains the two measures in detail.

Worked illustration (hypothetical figures, not a real listing)

A semi-detached factory in a Klang estate is offered at RM6.2 million. The title shows 18,000 sq ft of land and the approved plans 14,000 sq ft built-up.

  • Per sq ft of land: RM6,200,000 ÷ 18,000 = about RM344 psf of land.
  • Per sq ft built-up: RM6,200,000 ÷ 14,000 = about RM443 psf built-up.

Against the registered Klang and Port Klang semi-detached median of RM337 psf of land (median land 15,861 sq ft), the land figure sits near the middle and the total is inside the typical range. Setting "RM443 psf" against RM337 would make the factory look about 31% dearer than it is. Because this lot is larger than the median lot, it would normally be expected to show a slightly lower psf of land, not a higher one, so the seller should point to something concrete, such as a bigger power supply, a newer building or a corner position, to justify sitting above the median.

A buyer compares records and models of three factories of different sizes in one estate
IllustrationA buyer compares records and models of three factories of different sizes in one estate

Why do prices differ so much inside one estate?

Because value follows the individual lot and building, not the estate name. The registered figures already show the size effect: in Klang and Port Klang the median terrace factory sold at RM409 psf of land, semi-detached at RM337 and detached at RM270. More land, lower psf.

Factor Why it moves the price What to check on site
Land size and shape psf of land usually falls as the lot grows; a narrow or irregular lot uses land poorly Land area on the title, survey plan, setbacks
Frontage, corner and road A corner or main-road lot with direct container truck access is easier to use and to resell Gate width, turning space, road width in front
Power supply An existing high supply saves the time and cost of a TNB upgrade Latest TNB bill, meter rating, whether a substation sits on the lot
Building age and specs Eaves height, floor loading, crane beams, office ratio and roof condition decide who can use it Approved plans against what is built; cracks, settlement, leaks
Tenure and remaining lease A short remaining lease narrows the pool of buyers and lenders Lease expiry and restrictions in interest on the title
CCC or CF and approvals Occupying a building without a CCC is an offence carrying a fine of up to RM250,000, up to ten years' jail, or both (Act 133, section 70(27)(f)) A CCC or CF for every structure; built footprint against approved plans
Title conditions Land category, express conditions and Bumi lot status decide who can buy and what can run there An official title search
Tenancy A let factory is priced on its rent and lease; vacant possession suits an owner-occupier Tenancy agreement, rent against registered rents
Timing Prices move: like-for-like registered semi-detached prices in Klang and Port Klang rose 21% across 8 parks in the last 12 months against the 12 before, while detached fell 5% across 5 parks The dates of your comparables

Two units can look identical from the road and still be worth very different amounts once you see the title, the TNB bill and the approved plans. Ask for all three before you discuss price.

How much can I negotiate on a factory price?

There is no official or standard discount for factories, and anyone who quotes a fixed percentage is guessing. Your realistic room is set by four things.

  1. The evidence gap. If the asking price is above the adjusted registered range, that gap is your opening argument. If it is already inside the range, expect little room on price and more on terms.
  2. What due diligence finds. A missing CCC for an extension, a short remaining lease, a TNB supply below your needs, roof or floor repairs: each has a cost you can put a number on with written quotes.
  3. The seller's position. A seller who has already bought elsewhere, needs to settle a loan or has had the factory on the market for a long time has less reason to hold out. Ask how long it has been marketed and whether it is vacant.
  4. The market for that type. NAPIC's 1H2026 Property Market Report recorded 3,932 industrial transactions worth RM14.78 billion nationwide (The Edge). Registered data for Selangor and Kuala Lumpur shows types moving differently: like-for-like semi-detached prices up 11% across 28 parks over the last 12 months against the 12 before, detached down 4% across 13 parks.

Negotiate terms, not only price

On a multi-million ringgit deal, terms can be worth as much as a price cut. Points buyers commonly negotiate in the offer and the sale and purchase agreement:

  • The completion period and any extension, so your loan and any state consent the title requires have time to come through.
  • Vacant possession on a fixed date, or the existing tenancy carried over on known terms.
  • The seller regularising an unapproved structure, or obtaining the missing CCC, before completion.
  • Fixtures included in the price: overhead cranes, transformer or substation equipment, racking, air-conditioning.
  • An offer conditional on loan approval at a stated margin.

How the bank valuation and stamp duty feed into your offer

  • Banks lend on the lower figure. OCBC Malaysia's industrial and commercial property loan, for example, lends individuals "up to 85% of the property value or purchase price, or RM4 million, whichever is lower" (OCBC Malaysia). If the panel valuer comes in under your price, you pay the difference in cash. A low valuation is also hard evidence to take back to the seller.
  • Stamp duty follows market value. Duty on a transfer is charged on "the money value of the consideration or the market value of the property, whichever is the greater" (Item 32(a), First Schedule), and section 36B lets the Collector raise an additional assessment based on a government valuer's market value (Stamp Act 1949). Buying below market value does not lower the duty below market value.

How can I tell if a factory is undervalued, or just cheap for a reason?

A factory is undervalued when it is priced below the adjusted range of registered sales and the shortfall survives your checks. Most cheap factories are cheap for a reason, so look for the reason first.

Reasons a low price is justified

  • A short remaining lease, or a title with restrictions that limit who can buy or charge it.
  • No CCC or CF, or extensions that were never approved.
  • Land category or express conditions that do not match the use, or Bumi lot status that narrows the buyer pool.
  • A tenancy at below-market rent locked in for years.
  • Poor access for container trucks, a history of flooding, or a low power supply.
  • Heavy repairs to the roof, floor slab or drainage.

Signs a discount may be real

  • The seller's own circumstances: relocating, settling an estate, restructuring a company.
  • The factory has been poorly marketed, for example quoted on built-up psf or priced off old comparables.
  • The bank's panel valuer, or your own registered valuer, comes in at or above your price.

Confirm before you pay a deposit

  1. Official title search. PTG Selangor charges RM50 per title for an official search (carian rasmi) and RM30 for a private search (PTG Selangor fees). Our land search guide shows how to do it on e-Tanah.
  2. Approvals. The CCC or CF and the approved building plans, checked against what is on the ground.
  3. Building and M&E inspection. Roof, slab, drainage, switchroom and fire services.
  4. Valuation. The bank's panel valuer or your own.

Separate FactoryHub guides cover what your budget buys, a bank valuation that comes in below the price, caveats on a factory title, industrial land due diligence and inspecting a used factory.

Buyer and seller negotiate a factory price at a table beside an empty hall with an overhead crane
IllustrationBuyer and seller negotiate a factory price at a table beside an empty hall with an overhead crane

Should I pay for a valuation before making an offer?

For a purchase of RM3 million to RM20 million, a formal valuation is inexpensive protection when comparables are thin or the factory is unusual. Only a valuer registered with BOVAEP can sign one, and MVS 7 asks valuers to use more than one approach where possible.

Under the BOVAEP scale of fees (Seventh Schedule, item 3, capital valuation on an improved value basis) the fee is 1/4% on the first RM100,000, 1/5% on the residue up to RM2 million, 1/6% on the residue up to RM7 million, 1/8% up to RM15 million and 1/10% up to RM50 million. Worked out:

Property value Scale fee before tax and expenses
RM3 million about RM5,717
RM5 million RM9,050
RM10 million about RM16,133
RM20 million about RM27,383

Disbursements such as printing, plans and travel can be claimed on top, under item 6 of the same schedule.

Costs, tax and financing: more questions

How much does a warehouse cost in Malaysia?

JPPH-registered warehouse sales in Selangor and Kuala Lumpur had a median price of RM8.7 million in the 24 months to August 2026, with a typical range of RM4.5 million to RM17.66 million and a median of RM170 psf of land. Price depends heavily on land size, location and specs, so compare within the same area.

This guide explains general rules and is not legal, tax or valuation advice; confirm the details with your lawyer, valuer and bank before you sign.

To test an asking price against deals on the same estate: Ms Teh Seok Hoon's JPPH checks for Klang and Jason Low's price per square foot checks.

Frequently Asked Questions

How is the price of a factory calculated when buying?

There is no fixed formula: the price is agreed between buyer and seller and checked against JPPH-registered sales of the same factory type in the same estate. Divide each registered price, and the asking price, by the land area on the title to get RM psf of land, then adjust for lot size, frontage, power, building age and specs, remaining lease, CCC and any tenancy. Bigger lots usually show a lower psf of land. The bank lends on the lower of price and valuation, and stamp duty is charged on the higher of price and market value.

What is the difference between asking price and selling price?

The asking price is what the seller hopes to get; the selling price is what a buyer actually paid, and it is the selling price that ends up in JPPH's registered transaction records. For factories, judge an asking price against registered selling prices of the same type in the same estate, never against other asking prices.

What is considered a fair price for a factory?

A fair price is close to market value: what a willing buyer and willing seller would agree at arm's length after proper marketing, without pressure on either side. In practice that means a price inside the range of registered sales of the same factory type in the same estate, after adjusting for land size, power, age, tenure and approvals.

How do I find out the current market value of a factory?

Start with JPPH-registered sales from NAPIC's Open Sales Data or FactoryHub's industrial transaction pages, convert them to RM psf of land and adjust for the differences. For a figure a bank, auditor or court will accept, appoint a BOVAEP-registered valuer; for a RM5 million factory the scale fee is RM9,050 before tax and expenses.

Why are factory prices so different in the same industrial park?

Each lot differs in land size, frontage, corner position, TNB supply, building age and specs, remaining lease, approvals and tenancy, and each of those changes what buyers will pay. Bigger lots also show a lower price per sq ft of land, so compare like with like.

How much discount can I ask for when buying a factory in Malaysia?

There is no standard percentage. Your room is the gap between the asking price and the adjusted range of registered sales, plus the cost of problems your checks uncover, and it depends on how motivated the seller is. Where price is already fair, negotiate terms such as completion period, vacant possession and fixtures.

Is a factory priced below market value a good deal?

Only if the low price survives an official title search, a CCC check, an inspection and a valuation. Many cheap factories are cheap because of a short lease, missing approvals, title restrictions or heavy repairs. Remember that stamp duty is charged on market value if that is higher than your price.

Can I use the bank's valuation to judge the asking price?

It is a useful check, because banks lend on the lower of the purchase price and the valuation, so a low figure means more cash from you. A bank valuation is prepared for lending, though, so treat it as one piece of evidence alongside registered sales.

FactoryHub is dedicated to helping every client find the right factory or warehouse. To test an asking price against registered deals in a specific estate, talk to Peter Tan (REN 12771, 016-666 6872) or Jason Low (PEA 1478, 012-288 1834), registered with BOVAEP under CID Realtors Sdn Bhd.