Key Takeaways
- The lowest registered factory rents around the Klang Valley in the 24 months to August 2026 were in Hulu Selangor District at a median of RM0.85 psf per month (Serendah RM0.95), and in Negeri Sembilan at RM0.89 for Senawang, Sungai Gadut & Sendayan and RM1.00 for Seremban District.
- Inside the Klang Valley itself, the cheapest medians were Pandamaran RM1.07, Dengkil RM1.09, Semenyih & Beranang RM1.22, Bandar Sultan Suleiman (SBB) & Northport RM1.31, Rawang & Kundang RM1.39 and Kapar RM1.40, against RM1.54 for Selangor & Kuala Lumpur as a whole and RM2.30 in Selayang & Kepong.
- Rent is lower mainly because land is cheaper and fewer people live nearby. Registered industrial land changed hands at RM32 psf of land in Hulu Selangor District against RM110 in Petaling District, and Hulu Selangor had about 243,000 residents in the 2020 census against about 2.3 million in Petaling.
- The saving does not reach wages or electricity. The RM1,700 minimum wage applies to every employer nationwide, and TNB prices non-domestic supply by voltage level, not by district. What changes is trucking distance, the size of the local workforce, how long a power upgrade takes and how many units you can choose from.
- Compare total monthly cost, not the rate. A terrace factory in Serendah rented at a median of RM1,500 a month against RM3,700 for Selangor & Kuala Lumpur. Check whether extra trucking, worker transport and any power upgrade swallow that RM2,200 gap before you sign.
Every rent in this guide is a JPPH-registered tenancy: a real lease recorded with the government, aggregated by FactoryHub on the Selangor & Kuala Lumpur industrial transactions page. These are not asking rents from advertisements. Rents are per sq ft of rented floor area per month, and the data covers the registered records available so far (latest month August 2026), not every lease signed. For the full rent picture across all areas, including SST and service charges, read our factory rental price guide for Selangor. This guide looks only at the low end: where it is, why it exists and what it costs you.
Where is the cheapest factory for rent in the Klang Valley?
Ranked from the lowest registered median rent upwards:
| Area | Median rent (RM psf/month) | Typical range (RM psf/month) | Registered tenancies, 24 months |
|---|---|---|---|
| Hulu Selangor District | RM0.85 | RM0.62 to RM1.08 | 103 |
| Senawang, Sungai Gadut & Sendayan (Negeri Sembilan) | RM0.89 | RM0.69 to RM1.27 | 119 |
| Serendah (Hulu Selangor) | RM0.95 | RM0.70 to RM1.10 | 30 |
| Seremban District (Negeri Sembilan) | RM1.00 | RM0.78 to RM1.63 | 357 |
| Nilai, Labu & Enstek (Negeri Sembilan) | RM1.06 | RM0.84 to RM1.66 | 172 |
| Pandamaran (Klang) | RM1.07 | RM0.73 to RM1.45 | 20 |
| Dengkil (Sepang) | RM1.09 | RM0.66 to RM1.97 | 70 |
| Semenyih & Beranang | RM1.22 | RM0.77 to RM1.64 | 97 |
| Bandar Sultan Suleiman (SBB) & Northport | RM1.31 | RM0.88 to RM1.59 | 30 |
| Rawang & Kundang | RM1.39 | RM0.91 to RM2.22 | 25 |
| Kapar | RM1.40 | RM1.03 to RM1.90 | 292 |
| Klang & Port Klang | RM1.43 | RM1.00 to RM1.90 | 780 |
| Selangor & Kuala Lumpur | RM1.54 | RM1.02 to RM2.24 | 2,487 |
Source: JPPH-registered tenancies, 24 months to August 2026, aggregated by FactoryHub. Counts are the leases recorded in the registered data, not the whole market.
At the other end, the highest medians were Selayang & Kepong (Selangor) at RM2.30 (29 tenancies), Puchong RM2.14 (49), Petaling Jaya RM2.10 (61), Meru RM2.04 (17), Subang & Glenmarie RM2.00 (115) and Kuala Lumpur RM1.91 (66). The highest area median is more than double the lowest one in the table above.
Two notes on reading the table. Serendah sits inside Hulu Selangor District, and Senawang and Nilai sit inside Seremban District, so those rows overlap. Negeri Sembilan is outside the Klang Valley, but many Klang Valley tenants shortlist Nilai and Senawang for exactly this reason.
Which areas are cheapest for each type of factory?
An area median mixes small terrace units with large detached buildings, so compare by type before you compare by area.
Terrace factories (small units)
| Area | Median rent (RM psf/month) | Median monthly rent | Typical rented area | Tenancies |
|---|---|---|---|---|
| Serendah | RM0.77 | RM1,500 | about 2,000 sq ft | 20 |
| Hulu Selangor District | RM0.79 | RM1,300 | about 1,860 sq ft | 82 |
| Senawang, Sungai Gadut & Sendayan | RM0.82 | RM1,900 | about 2,080 sq ft | 68 |
| Seremban District | RM0.90 | RM2,200 | about 2,600 sq ft | 206 |
| Nilai, Labu & Enstek | RM0.97 | RM2,700 | about 2,890 sq ft | 105 |
| Rawang & Kundang | RM1.06 | RM2,600 | about 2,400 sq ft | 14 |
| Pandamaran | RM1.10 | RM3,100 | about 2,190 sq ft | 8 |
| Semenyih & Beranang | RM1.27 | RM2,800 | about 2,240 sq ft | 34 |
| Selangor & Kuala Lumpur | RM1.62 | RM3,700 | about 2,000 sq ft | 1,084 |
SBB & Northport also shows a terrace median of RM0.77 psf, but on only 7 tenancies, so treat it as a pointer.
Semi-detached factories
Semenyih & Beranang is the clear low point for semi-detached units: RM1.13 psf, a median of RM9,300 a month for about 9,720 sq ft (20 tenancies), against RM1.75 psf and RM12,900 a month for about 7,960 sq ft across Selangor & Kuala Lumpur. Senawang (RM1.61), Seremban District (RM1.67) and Dengkil (RM1.67) follow.
Detached factories
| Area | Median rent (RM psf/month) | Median monthly rent | Typical rented area | Tenancies |
|---|---|---|---|---|
| Pandamaran | RM0.69 | RM6,100 | about 13,860 sq ft | 9 |
| Hulu Selangor District | RM1.08 | RM12,000 | about 13,450 sq ft | 13 |
| Senawang, Sungai Gadut & Sendayan | RM1.08 | RM15,000 | about 16,300 sq ft | 32 |
| Kapar | RM1.21 | RM20,100 | about 17,880 sq ft | 108 |
| Klang & Port Klang | RM1.22 | RM19,700 | about 15,090 sq ft | 301 |
| Sungai Buloh & Kota Damansara | RM1.25 | RM8,500 | about 4,840 sq ft | 63 |
| Selangor & Kuala Lumpur | RM1.38 | RM12,500 | about 8,220 sq ft | 743 |
The surprise here is the port belt. For large detached buildings, Kapar and Klang & Port Klang rent below the Selangor & Kuala Lumpur median on hundreds of registered leases, while sitting close to Port Klang. Pandamaran's RM0.69 comes from only 9 leases.
Stratified factories
The cheapest small strata units were in Semenyih & Beranang (RM0.84 psf, RM1,700 a month for about 2,150 sq ft) and Dengkil (RM0.98 psf, RM700 a month for about 910 sq ft, 41 tenancies), against RM1.58 psf and RM3,000 a month across Selangor & Kuala Lumpur.
Why is factory rent cheaper in some areas?
The land costs less
Rent follows land value. In the same 24 months, registered industrial land sold at RM20 psf of land in Senawang, RM32 in Hulu Selangor District, RM35 in Semenyih & Beranang and RM37 in Serendah. Closer in, it was RM90 in Klang & Port Klang, RM110 in Petaling District, RM120 in Subang & Glenmarie and RM215 in Kuala Lumpur. A landlord whose land is worth a third as much can charge far less and still earn a return.
The Malaysian Investment Development Authority (MIDA) publishes the same gap at state level: industrial land at RM65 to RM200 psf in Selangor against RM20 to RM70 in Negeri Sembilan, and ready-built factory rent of RM1.50 to RM3.00 psf per month in Selangor against RM0.90 to RM1.50 in Negeri Sembilan.
Fewer people live nearby
Factory demand follows people, both as workers and as customers. In the 2020 census, as published in DOSM's district population table, Petaling District had about 2.30 million residents, Hulu Langat 1.40 million and Klang 1.09 million. The low-rent districts are far smaller: Sepang about 325,200, Kuala Langat about 307,400 and Hulu Selangor about 243,000. Fewer local businesses compete for each vacant unit, so landlords compete on price.
Bigger buildings pull the median down
Large buildings rent for less per sq ft everywhere. In Klang & Port Klang a detached factory rents at RM1.22 psf against RM1.78 for a semi-detached unit, and in Kapar RM1.21 against RM1.85. An area full of large detached buildings, like the port belt, shows a lower median than an area of small terrace units, even when the small units there cost the same as anywhere else.
Some samples are thin
Pandamaran (20 tenancies), Serendah (30) and SBB & Northport (30) rest on few leases, and a handful of unusual deals can move the median. The registered data also does not record building age, condition or power supply, so a low rate can reflect an older or plainer unit. Inspect before you count the saving.
What does a cheaper factory cost you in access, power and labour?
Access: trucking time and distance
Every kilometre between your factory and the port, your suppliers and your customers is paid for on every trip. For an importer or exporter moving containers every week, a cheaper unit far from Port Klang can cost more in haulage than it saves in rent. Ask your haulier to quote your real monthly trip list from both addresses, and check that container trucks can reach and turn at the unit. If you depend on the port, the port belt is the cheaper option that keeps you close: browse factories for rent in Port Klang.
Power: same tariff, slower upgrades
Moving to a cheaper district does not lower your electricity rate. Under TNB's tariff structure from 1 July 2025, customers are grouped by the voltage of their supply (low, medium or high), not by location. What does differ is the supply already installed in the unit you rent, so check it against your machines before you sign.
An upgrade takes time. TNB's Electricity Supply Application Handbook requires an application for a load above 100 A to go through an electrical consultant engineer registered with the Board of Engineers Malaysia. Its typical lead times are less than 3 months for 400 V supply without a substation, 3 to 12 months with a substation, and 6 to 12 months for 11 kV, provided local authority approval is not delayed. A single customer with a maximum demand above 350 kVA up to 1,000 kVA is supplied from a new substation. Rent paid on a factory that cannot run its machines is not a saving. Size your load first with the factory power calculator.
Labour: the same wage floor, a smaller local pool
The minimum wage is the same everywhere. From 1 August 2025, every employer nationwide must pay at least RM1,700 a month, and the order covers non-citizen workers. Budget 2027 raises it to RM2,000 from June 2027, with micro, small and medium enterprises with annual sales below RM50 million exempted. A cheaper area therefore does not lower what you pay per worker. It only changes how many workers live within commuting distance, which can mean longer hiring times or company transport.
Choice and lease terms
Fewer registered leases also means fewer units to choose from when you need a specific size, power supply or ceiling height. Lease terms differ too: the typical registered term was 24 months across Selangor & Kuala Lumpur, but 12 months in Dengkil, 15 months in SBB & Northport and 21 months in Serendah.
How do I work out whether a cheaper factory really saves money?
- Put both units on the same basis: RM psf per month on the rented floor area, and the monthly rent.
- Check each against the registered median for the same factory type in the same area on the industrial transactions page.
- Price the trips: haulier quotes for your real monthly volume from both addresses, plus staff travel.
- Check the power: list your machines, convert to amps and compare with the supply already installed. If a substation is needed, add 3 to 12 months before production starts.
- Check the people: where your workers live now, and how long the new commute would be.
- Add the fixed costs: deposits, stamp duty on the tenancy agreement (use the tenancy stamp duty calculator), fit-out and reinstatement at the end of the lease.
- Compare total monthly cost over the whole lease term, not the headline rate.
A worked comparison with registered medians: a terrace factory of about 2,000 sq ft rented for RM1,500 a month in Serendah against RM3,700 across Selangor & Kuala Lumpur. That is a gap of RM2,200 a month, or RM26,400 a year. If extra trucking, travel and slower hiring cost you less than that, the cheaper area wins. For large buildings, a detached factory in Senawang rented at RM15,000 a month for about 16,300 sq ft against RM19,700 for about 15,090 sq ft in Klang & Port Klang: a RM4,700 monthly gap that a port-heavy business can spend quickly on haulage.
Which cheaper area suits which kind of business?
- Heavy container users: the port belt (Pandamaran, SBB & Northport, Kapar, Klang & Port Klang) keeps rent below the Selangor & Kuala Lumpur median without moving away from the port.
- Small workshops and storage serving the northern Klang Valley: Serendah, Rawang & Kundang and the rest of Hulu Selangor District, where terrace units rented for RM0.77 to RM1.06 psf.
- Businesses whose staff and customers are to the south: Semenyih & Beranang, Dengkil, Nilai and Senawang. Semenyih & Beranang had the lowest semi-detached median in the data.
- Businesses that need a central address, a large workforce nearby or same-day delivery in Kuala Lumpur: the higher rents of Petaling District, Puchong and Subang buy exactly that.
This guide is general information, not legal advice. Confirm the terms of your own tenancy with the landlord and your lawyer.
Street-level detail: where factory rent is cheapest in Klang and Port Klang from Ms Teh Seok Hoon, and lower-rent options in Serendah, Rawang and Shah Alam from Jason Low.
Frequently Asked Questions
Which is cheaper to rent, a factory in Klang or in Shah Alam?
Klang is cheaper. In JPPH-registered factory tenancies over the 24 months to August 2026, Klang and Port Klang had a median rent of RM1.43 psf per month against RM1.71 in Shah Alam. Klang was lower for every type: terrace RM1.47 against RM1.79, semi-detached RM1.78 against RM2.12 and detached RM1.22 against RM1.50. One unit can rent above or below these medians, so compare units of similar size, power and truck access.
Where is the cheapest factory for rent in the Klang Valley?
On JPPH-registered leases in the 24 months to August 2026, the lowest medians inside the Klang Valley were Pandamaran at RM1.07 psf per month, Dengkil at RM1.09 and Semenyih & Beranang at RM1.22. Just outside it, Hulu Selangor District (RM0.85), Serendah (RM0.95) and Senawang in Negeri Sembilan (RM0.89) were lower still. Compare by factory type, because small and large units price very differently.
What is the average factory rent per square foot in Selangor?
The median across 2,487 registered factory tenancies in Selangor and Kuala Lumpur over the 24 months to August 2026 was RM1.54 psf per month, with typical rents from RM1.02 to RM2.24. Terrace factories had a median of RM1.62 psf and detached factories RM1.38 psf.
Is factory rent cheaper in Negeri Sembilan than in Selangor?
Yes. Seremban District had a registered median of RM1.00 psf per month and Senawang, Sungai Gadut & Sendayan RM0.89, against RM1.54 for Selangor & Kuala Lumpur. MIDA's published range for ready-built factory rent is RM0.90 to RM1.50 psf per month in Negeri Sembilan and RM1.50 to RM3.00 in Selangor.
Why is factory rent so high in Puchong, Subang and Petaling Jaya?
These areas sit in Petaling District, which had about 2.3 million residents in the 2020 census, and industrial land there sold at a registered RM110 psf of land against RM32 in Hulu Selangor District. Tenants pay for the large workforce, the customers nearby and short trips into Kuala Lumpur. The registered medians were RM2.14 in Puchong, RM2.10 in Petaling Jaya and RM2.00 in Subang & Glenmarie.
Does a cheaper area mean lower electricity bills or wages?
No. TNB groups non-domestic customers by supply voltage, not location, so the tariff is the same, and the RM1,700 minimum wage applies to every employer nationwide. The cheaper area lowers your rent only, while trucking, worker transport and any power upgrade may cost more.
Are these rents asking prices or real deals?
They are real leases registered with JPPH and aggregated by FactoryHub, not advertised asking rents. They cover the registered records available up to August 2026, which is not every lease signed in each area.
How much does a small factory cost to rent in Serendah?
The registered median for a terrace factory in Serendah was RM0.77 psf per month, or RM1,500 a month for about 2,000 sq ft, across 20 tenancies in the 24 months to August 2026. Check the power supply and the distance to your customers before you count the saving.
FactoryHub is dedicated to helping every client find the right factory or warehouse. For a shortlist of lower-rent units that still meet your power, access and labour needs, call Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.
