Key Takeaways
- Yes, factory rent can be negotiated. No Malaysian law sets the rent of a factory or warehouse or caps its increase. The Control of Rent Act 1966 was repealed by the Control of Rent (Repeal) Act 1997, whose transitional period ended on 31 December 1999, and the Residential Tenancy Act still being drafted in 2026 is for homes. Rent and every increase come from your contract.
- The monthly figure is only one lever. A rent-free fit-out period, the number of deposit months, the yearly step-up, a cap on the renewal rent, who repairs what, and who pays the management charges and service tax can be worth more than a small cut in the headline rent.
- No law fixes the annual increase. It is whatever the agreement says. In JPPH-registered tenancies across Selangor and Kuala Lumpur, like-for-like rent changed year on year by +6% for terrace factories, -11% for semi-detached factories and +16% for detached factories, so rents move both ways and differ by type.
- Management charges on a strata unit are the owner's bill by law. Under the Strata Management Act 2013 the owner pays the developer, JMB or management corporation; the tenant pays only if the tenancy agreement says so.
- Write it down twice: first in the letter of offer, then in the tenancy agreement. A renewal rent left "to be agreed" can make the renewal option void under section 30 of the Contracts Act 1950.
This guide is general information, not legal or tax advice. Have your lawyer read the letter of offer and the tenancy agreement before you sign or pay.
Can factory rent be negotiated in Malaysia?
Yes. The rent for a factory, warehouse or industrial yard is a private bargain between landlord and tenant. The Control of Rent (Repeal) Act 1997 ended rent control under the 1966 Act, with its transitional period running from 1 September 1997 to 31 December 1999. The planned Residential Tenancy Act, which Housing and Local Government Minister Nga Kor Ming said in February 2026 was in its final stage of drafting, is meant for the rental housing market, according to The Edge. Nothing in it is aimed at factories.
How much room you have depends on the unit and on you:
- How long the unit has been empty, and whether the landlord is paying the loan, quit rent and assessment with no income.
- How well the unit fits. A detached factory with the power, ceiling height and truck access you need gives the landlord more leverage than one you would have to upgrade.
- Your commitment. A longer term, a stronger company and a director's guarantee are worth something to a landlord.
- What you ask the landlord to spend. Every ringgit of landlord works (power upgrade, offices, floor repairs) is a ringgit the landlord wants back through rent or term.
Bring evidence, not opinion. The JPPH-registered tenancies for Selangor and Kuala Lumpur show 2487 registered factory tenancies in 24 months, a median rent of RM1.54 psf/month and a typical range of RM1.02 psf/month to RM2.24 psf/month, with a typical term of 24 months. By type: terrace factory RM1.62 psf/month, semi-detached factory RM1.75 psf/month (median monthly rent RM12,900 for about 7,960 sq ft) and detached factory RM1.38 psf/month (median monthly rent RM12,500 for about 8,220 sq ft). Compare like with like: the same type in the same area, then adjust for power, height, yard and condition.
What is negotiable besides the monthly rent?
Almost every money term in a factory tenancy is open until you sign. These are the ones that matter most on a five-figure monthly rent:
| Term | What decides it | What to write |
|---|---|---|
| Headline rent | Registered rents for the same type and area, the unit's specs, how long it has been empty | Rent per month, whether it includes service tax and management charges |
| Rent-free fit-out period | Scope of your works and the approvals they need | Start trigger, length, extension if delayed, what you still pay |
| Security and utility deposit | Your company's track record, landlord's spending on the unit | Months, refund deadline after handover, what may be deducted |
| Yearly step-up | Term length, market direction | Fixed % or fixed ringgit per year, from which date |
| Renewal option and rent | How long you need the site | Notice window, rent formula, cap and floor, valuer if no agreement |
| Repairs | Age and condition of roof, structure and M&E | Who repairs what, defects fixed before rent starts |
| Management and service charges | Whether the unit is strata or on its own title | Who pays, and whether it is inside or on top of the rent |
| Stamp duty and legal fees | Custom, and who drafts | Who pays each item |
Our guide on what it costs to rent a factory works out the deposit, stamp duty, legal fee and TNB deposit in ringgit, so you can see what each concession is worth in cash.
How much does factory rent go up each year?
There is no legal or standard figure. During the term the rent stays as written unless the agreement provides for a change, and at renewal it is whatever the renewal clause produces. The common ways to write it:
- Flat for the term, reviewed at renewal. Simple, and suits short terms. In the registered data the typical factory tenancy runs 24 months.
- Fixed step-up. For example, a stated percentage on each anniversary. Check the compounding: as an illustration, RM20,000 a month rising 5% a year becomes RM21,000 in year two and RM22,050 in year three.
- Market review with a cap and a floor. The rent moves to the prevailing market rate, but not more than an agreed percentage above (or below) the last rent.
Market evidence cuts both ways. In JPPH-registered tenancies across Selangor and Kuala Lumpur, like-for-like rent changed year on year by +6% across 24 parks for terrace factories, -11% across 5 parks for semi-detached factories and +16% across 16 parks for detached factories. A cap protects the tenant in a rising market; a floor protects the landlord in a falling one. Ask for both to be written, then check which side you are on.
Step-ups also change your stamp duty. LHDN charges tenancy duty under item 49(a) of the Stamp Act First Schedule on each RM250 of the annual rent or average annual rent, at RM3 per RM250 for a term of more than one and up to three years, according to its stamp duty guideline of 30 June 2026. Enter the average monthly rent over the term in our tenancy stamp duty calculator. How renewal options and rent reviews work in law is covered in our factory lease term guide.
Can I ask for a rent-free fit-out period?
Yes. No law grants one, so it exists only if you negotiate it. It is most often asked for when the tenant must do real work before production starts: offices, a power upgrade, racking, a cold room, effluent treatment or fire protection changes. The length is decided by that scope and by how long the permits take, so build your request from your own works programme, not from a round number.
What to write in the clause:
- The trigger. Start the period on handover with vacant possession and keys, not on the signing date.
- The length, and an extension. Add days if the landlord's own works, the landlord's consent to your plans, or documents only the landlord can sign arrive late.
- What you still pay. You will be using power and water from handover, so utilities run from then. Say whether management charges, insurance and service tax are also paused.
- Early exit. A landlord may ask for the rent-free benefit back if the tenant leaves early. If so, agree the formula now.
- The end of the tenancy. Settle now which of your fit-out works stay and which must be removed. Our reinstatement works guide explains what to agree before you renovate.
Because stamp duty follows the annual or average annual rent, how the rent-free months are written changes the duty. Confirm the figure on LHDN e-Duti Setem before paying.
Is the management fee paid by the owner or the tenant?
By law, the owner. In a strata scheme the Strata Management Act 2013 makes each purchaser pay the charges and sinking fund contribution for the parcel to the developer (section 12) or the joint management body (section 25), and each proprietor pay the management corporation (section 52). The sinking fund contribution is 10% of the charges, and after the management corporation sets it, not less than 10% (sections 52(3) and 61(3)). The management body chases the owner, not the tenant.
Between landlord and tenant it is a contract term, and the agreement can put it one of three ways: the landlord pays and the rent covers it; the tenant reimburses the charges at cost; or the rent is quoted "inclusive" of the charges. Ask which one applies and see the latest bill.
Two practical points:
- Service tax follows the structure. The Royal Malaysian Customs Department's rental services guide (version 2, 14 May 2026) treats rent that includes a maintenance management charge as taxable rental, sets the rate at 6% from 1 January 2026, and requires a landlord to register once its taxable rental exceeds RM1 million in 12 months. A refundable security deposit is not taxed, and TNB or water bills the tenant pays directly to the utility are not taxed, while utilities re-billed by the landlord are. A tenant that is a micro, small or medium enterprise with annual sales of not more than RM1,500,000 can be exempted by registering in the Customs MyPMK system.
- A factory on its own individual title is not a parcel in a strata scheme, so these statutory charges do not apply. Any park, guard or road fee there comes from a private arrangement, so ask to see it and who it bills.
Deposit, repairs and the other terms worth negotiating
Deposit
No law fixes the number of months for a factory. Negotiate the amount, a refund deadline that runs from handover of vacant possession, and a closed list of what the landlord may deduct. Our cost to rent a factory guide sets out the usual package and what it means in cash.
Repairs and handover condition
Agree who repairs the roof, structure, external drains, fire protection systems and major mechanical and electrical items, and who handles day-to-day internal repairs. Make the landlord fix known defects such as roof leaks and faulty fire systems before the rent starts, and attach a dated photo record of the condition at handover. Who repairs what in detail is a subject of its own; the point here is to price it into the rent you agree.
Stamp duty and legal fees
Who pays the stamp duty and each side's legal fee is negotiable. Put it in the letter of offer so it is not argued over later.
What should you get in writing?
First in a signed letter of offer, then in the tenancy agreement:
- The parties, the company's registration number and any director's guarantee.
- The unit, title and the floor area the rent is based on.
- The rent, whether it includes service tax and management charges, and the payment date.
- The commencement date of the term and the date rent starts, if different.
- The rent-free period: trigger, length, extension and what is still payable.
- Every step-up and the date it applies.
- The renewal option: notice window, further terms, and a rent formula with a cap and floor or an independent valuer.
- Deposits, refund deadline and permitted deductions.
- Repairs, handover condition and defects the landlord will fix first.
- Permitted use, and that the deal depends on the council licence and any power upgrade you need.
- Landlord consent for your fit-out, and what must be removed at the end.
- Who pays stamp duty, legal fees, management charges, quit rent, assessment and insurance.
The renewal rent needs special care. Section 30 of the Contracts Act 1950 says agreements whose meaning "is not certain, or capable of being made certain, are void". In Watson's Personal Care Stores Sdn Bhd v Aluxcare Wellness Sdn Bhd [2025] MLJU 3119, the High Court upheld a renewal clause that set the rent at the prevailing market rate with any increase capped at 10% of the previous monthly rent, and sent the question of the market rate for trial, according to a case note by Amin-Tan & Co. The same note says an option with rent simply "to be agreed" was held void in an earlier case. Give the renewal rent a formula.
Common mistakes when negotiating factory rent
- Winning RM1,000 off the rent but leaving the renewal rent "to be agreed".
- A rent-free period that starts on signing, so it is used up while you wait for keys or permits.
- Paying the earnest deposit before the conditions you depend on (licence, power, use) are written into the offer.
- Not asking whether the quoted rent includes service tax and management charges.
- Comparing asking rents, or a detached factory with a terrace one, instead of registered rents for the same type and area.
- Agreeing yearly step-ups for the first term with no cap for the renewal term.
Frequently Asked Questions
Can factory rent be negotiated in Malaysia?
Yes. No Malaysian law sets or caps the rent of a factory or warehouse, so the rent, the increases and the other money terms are agreed between landlord and tenant. Use JPPH-registered rents for the same factory type and area as your evidence, and negotiate the package, not only the monthly figure.
How much does factory rent go up each year in Malaysia?
There is no fixed or legal rate; the increase is whatever the tenancy agreement says. An agreement can keep the rent flat for the term and review it at renewal, set a fixed yearly step-up, or use a market review with a cap. In JPPH-registered tenancies across Selangor and Kuala Lumpur, like-for-like rent changed year on year by +6% for terrace, -11% for semi-detached and +16% for detached factories.
Can I ask for a rent-free fit-out period?
Yes, but only by negotiation, because no law gives one. Base the request on your actual works and permit timeline, start it on handover rather than on signing, and write what you still pay during it and what happens if you leave early.
Is the management fee paid by the owner or the tenant?
By law the owner of a strata unit pays the charges and sinking fund contribution to the developer, JMB or management corporation under the Strata Management Act 2013. The tenant pays only if the tenancy agreement passes it on, so ask whether the quoted rent includes the charges and see the latest bill.
Can the landlord increase the rent during the tenancy?
Only if the tenancy agreement allows it, for example through a step-up or a review clause. Otherwise the rent stays as written until the term ends, and the new rent is set under the renewal clause or a fresh agreement.
What does a rent free period mean?
It is a stretch of the tenancy, usually at the start, during which no rent is charged so the tenant can fit out the factory. The tenant normally still occupies the unit and pays its own utilities, and the agreement should say whether other charges are also paused.
Is service tax charged on top of factory rent?
Only if the landlord is registered, which Customs requires once taxable rental exceeds RM1 million in 12 months. The rate is 6% from 1 January 2026, and an SME tenant with annual sales of not more than RM1,500,000 can be exempted by registering in MyPMK. Ask the landlord whether the quoted rent is inclusive or exclusive of service tax.
How is stamp duty worked out when there is a rent-free period or step-up?
LHDN charges duty under item 49(a) on each RM250 of the annual or average annual rent, at a rate that depends on the term. Enter the average monthly rent over the whole term in a tenancy stamp duty calculator, then confirm the figure on LHDN e-Duti Setem before paying.
FactoryHub is dedicated to helping every client find the right factory or warehouse. To talk through the rent and terms on a unit you are considering, contact Peter Tan (REN 12771) on 016-666 6872 or Jason Low (PEA 1478) on 012-288 1834.
