Key Takeaways
- At the registered Selangor and Kuala Lumpur median rate for each size band, a 10,000 sq ft factory rents for about RM12,700 a month, 20,000 sq ft for about RM25,400, 50,000 sq ft for about RM61,000 and 100,000 sq ft for about RM113,000 (your size multiplied by the band's median rate, from JPPH-registered tenancies in the 24 months to August 2026).
- Bigger units rent for less per sq ft: the registered median falls from RM1.57 psf/month for 3,000 to 10,000 sq ft to RM1.27 for 10,000 to 30,000 sq ft, RM1.22 for 30,000 to 60,000 sq ft and RM1.13 for 60,000 sq ft and above.
- Location moves the budget more than anything else. For 10,000 to 30,000 sq ft, area rates run from RM0.91 psf in Gombak District to RM2.30 psf in Petaling Jaya, so the same 20,000 sq ft costs about RM18,200 or about RM46,000 a month.
- Semi-detached factories rent for more per sq ft than detached ones across Selangor and KL (RM1.75 against RM1.38 psf/month). The gap is widest in Kapar and Shah Alam; in Kuala Langat, Semenyih and Hulu Langat it runs the other way.
- Before moving in, the common package of two months' security deposit, one month's utility deposit and one month's advance rent equals four months of rent: about RM50,800 for 10,000 sq ft and about RM452,000 for 100,000 sq ft, plus tenancy stamp duty and, where it applies, 6% service tax on the rent.
How much does it cost to rent a factory of each size in Selangor?
Direct answer: budget roughly RM12,700 a month for 10,000 sq ft, RM25,400 for 20,000 sq ft, RM61,000 for 50,000 sq ft and RM113,000 for 100,000 sq ft, before service tax, if the unit rents at the Selangor and KL median rate for its size band.
These figures come from tenancies registered with JPPH (the Valuation and Property Services Department), which FactoryHub summarises on the Selangor and KL industrial transactions page. They are signed deals, not asking rents. Across 2,487 registered factory tenancies in the 24 months to August 2026, the median was RM1.54 psf/month, typically RM1.02 to RM2.24 psf/month, on a typical term of 24 months. Rent is quoted per sq ft of the floor area rented, per month.
| Size you need | Size band in the registered data | Band median rate | Band median monthly rent | Your size x band median rate |
|---|---|---|---|---|
| 10,000 sq ft | 10,000 to 30,000 sq ft | RM1.27 psf | RM20,300 | about RM12,700 |
| 20,000 sq ft | 10,000 to 30,000 sq ft | RM1.27 psf | RM20,300 | about RM25,400 |
| 50,000 sq ft | 30,000 to 60,000 sq ft | RM1.22 psf | RM48,700 | about RM61,000 |
| 100,000 sq ft | 60,000 sq ft and above | RM1.13 psf | RM101,500 | about RM113,000 |
Source: JPPH-registered factory tenancies, Selangor and Kuala Lumpur, 24 months to August 2026. The last column is arithmetic on the registered rate, not a registered deal.
The "band median monthly rent" is the middle deal in that band, at whatever size those units happened to be. The last column applies the band's median rate to your exact size, which is the number to put in a budget. For context, smaller units registered higher rates: under 3,000 sq ft at RM1.71 psf (median RM3,000 a month) and 3,000 to 10,000 sq ft at RM1.57 psf (median RM8,400 a month).
Does a bigger factory always cost less per sq ft?
Mostly, but not everywhere. In Petaling District the 60,000 sq ft and above band registered RM1.52 psf, above its 30,000 to 60,000 sq ft band at RM1.38. In Petaling Jaya the 10,000 to 30,000 sq ft band (RM2.30) sits above the 3,000 to 10,000 sq ft band (RM2.25). Always read the bands for the area you are considering instead of assuming a discount for size.
What decides where a unit falls inside its band?
The registered data notes that ceiling height, power supply and loading access move rent as much as location. Before you compare rents, list what your operation needs: TNB supply in amps (the factory power calculator turns a machine list into amps), clear height for racking, container access and yard space. A unit that rents well below its band often lacks one of these, and fixing it can cost more than the rent you save.
What is the monthly rent budget in each area?
Direct answer: for 20,000 sq ft, plan on roughly RM24,600 in Klang and Port Klang, RM32,600 in Shah Alam, RM36,400 in Subang and Glenmarie and RM46,000 in Petaling Jaya, against about RM19,800 in Semenyih and RM18,200 in Gombak District. For 100,000 sq ft the registered bands sit at RM0.79 to RM1.52 psf, so about RM79,000 to RM152,000 a month.
| Area | 10,000 sq ft | 20,000 sq ft | 50,000 sq ft | 100,000 sq ft |
|---|---|---|---|---|
| Selangor & KL (all areas) | RM12,700 (RM1.27) | RM25,400 (RM1.27) | RM61,000 (RM1.22) | RM113,000 (RM1.13) |
| Klang & Port Klang | RM12,300 (RM1.23) | RM24,600 (RM1.23) | RM60,000 (RM1.20) | RM109,000 (RM1.09) |
| Kapar | RM13,100 (RM1.31) | RM26,200 (RM1.31) | RM60,000 (RM1.20) | RM102,000 (RM1.02) |
| Pulau Indah, Westport & PIIP | no band figure | no band figure | no band figure | RM79,000 (RM0.79) |
| Bandar Sultan Suleiman & Northport | RM18,000 (RM1.80) | RM36,000 (RM1.80) | no band figure | RM114,000 (RM1.14) |
| Shah Alam | RM16,300 (RM1.63) | RM32,600 (RM1.63) | RM69,500 (RM1.39) | no band figure |
| Subang & Glenmarie | RM18,200 (RM1.82) | RM36,400 (RM1.82) | RM70,500 (RM1.41) | no band figure |
| Petaling District | RM16,200 (RM1.62) | RM32,400 (RM1.62) | RM69,000 (RM1.38) | RM152,000 (RM1.52) |
| Petaling Jaya | RM23,000 (RM2.30) | RM46,000 (RM2.30) | no band figure | no band figure |
| Sungai Buloh & Kota Damansara | RM14,900 (RM1.49) | RM29,800 (RM1.49) | RM69,000 (RM1.38) | no band figure |
| Meru | RM12,200 (RM1.22) | RM24,400 (RM1.22) | no band figure | no band figure |
| Telok Panglima Garang & Jenjarom | RM14,100 (RM1.41) | RM28,200 (RM1.41) | RM30,500 (RM0.61) | no band figure |
| Kuala Langat District | RM12,500 (RM1.25) | RM25,000 (RM1.25) | RM32,500 (RM0.65) | no band figure |
| Kajang, Balakong & Bangi | RM13,300 (RM1.33) | RM26,600 (RM1.33) | no band figure | no band figure |
| Hulu Langat District | RM12,200 (RM1.22) | RM24,400 (RM1.22) | no band figure | no band figure |
| Semenyih & Beranang | RM9,900 (RM0.99) | RM19,800 (RM0.99) | no band figure | no band figure |
| Ijok & Puncak Alam | RM9,200 (RM0.92) | RM18,400 (RM0.92) | no band figure | no band figure |
| Gombak District | RM9,100 (RM0.91) | RM18,200 (RM0.91) | no band figure | no band figure |
| Nilai, Labu & Enstek | RM10,700 (RM1.07) | RM21,400 (RM1.07) | no band figure | no band figure |
| Seremban District | RM10,300 (RM1.03) | RM20,600 (RM1.03) | RM53,000 (RM1.06) | RM86,000 (RM0.86) |
Each cell is your size multiplied by the area's registered median rate for that size band (shown in brackets, psf/month). Source: JPPH-registered tenancies, 24 months to August 2026. "No band figure" means the registered data publishes no median for that size in that area.
How to read it:
- Large units cluster in the port belt. Klang and Port Klang, Kapar, Pulau Indah and Bandar Sultan Suleiman are where the registered data has rates for 60,000 sq ft and above. Their band median monthly rents were RM98,700, RM77,800, RM115,500 and RM160,000 respectively. The Klang and Port Klang transactions page shows the deals behind them.
- Two bands look out of line. The 30,000 to 60,000 sq ft rates in Telok Panglima Garang (RM0.61) and Kuala Langat (RM0.65) sit far below those areas' 10,000 to 30,000 sq ft rates, and their band median monthly rents (RM26,300 and RM26,500) are lower than the smaller band's. Treat them as a floor, not a budget, and ask to see the comparable deals.
- Negeri Sembilan is cheaper per sq ft but further away. Seremban District registered RM0.86 psf above 60,000 sq ft (median RM110,000 a month). Weigh the saving against trucking time to Port Klang and to your customers.
For where the large stock actually sits and the specs to check at that scale, see the guide to large factory space of 50,000 to 100,000+ sq ft in the Klang Valley.
How much more does a semi-detached factory cost to rent than a detached one?
Direct answer: across Selangor and KL, semi-detached factories registered a median of RM1.75 psf/month against RM1.38 for detached, a gap of RM0.37 psf. The median monthly rents were close (RM12,900 for about 7,960 sq ft against RM12,500 for about 8,220 sq ft) because the medians are taken separately, so compare like-sized units in the same park rather than dividing one figure by the other.
| Area | Semi-D rate (tenancies) | Semi-D median rent (size) | Detached rate (tenancies) | Detached median rent (size) |
|---|---|---|---|---|
| Selangor & KL | RM1.75 (316) | RM12,900 (7,960 sq ft) | RM1.38 (743) | RM12,500 (8,220 sq ft) |
| Klang & Port Klang | RM1.78 (119) | RM15,000 (8,630 sq ft) | RM1.22 (301) | RM19,700 (15,090 sq ft) |
| Kapar | RM1.85 (55) | RM16,000 (9,520 sq ft) | RM1.21 (108) | RM20,100 (17,880 sq ft) |
| Shah Alam | RM2.12 (24) | RM17,300 (8,810 sq ft) | RM1.50 (34) | RM12,200 (9,170 sq ft) |
| Petaling District | RM2.05 (81) | RM14,000 (7,200 sq ft) | RM1.50 (191) | RM9,900 (5,600 sq ft) |
| Sungai Buloh & Kota Damansara | RM1.82 (17) | RM14,000 (6,000 sq ft) | RM1.25 (63) | RM8,500 (4,840 sq ft) |
| Subang & Glenmarie | RM2.14 (7) | RM12,000 (10,000 sq ft) | RM1.81 (29) | RM12,500 (6,680 sq ft) |
| Kajang, Balakong & Bangi | RM1.75 (18) | RM7,000 (5,380 sq ft) | RM1.35 (51) | RM8,100 (5,790 sq ft) |
| Hulu Langat District | RM1.26 (43) | RM8,800 (9,470 sq ft) | RM1.38 (102) | RM9,800 (5,660 sq ft) |
| Semenyih & Beranang | RM1.13 (20) | RM9,300 (9,720 sq ft) | RM1.39 (27) | RM13,000 (6,490 sq ft) |
| Kuala Langat District | RM1.07 (17) | RM15,000 (14,280 sq ft) | RM1.48 (41) | RM19,800 (10,760 sq ft) |
| Telok Panglima Garang & Jenjarom | RM1.30 (9) | RM26,000 (8,820 sq ft) | RM1.51 (32) | RM20,000 (14,200 sq ft) |
| Seremban District | RM1.67 (60) | RM5,700 (3,370 sq ft) | RM1.31 (84) | RM12,000 (6,880 sq ft) |
Source: JPPH-registered factory tenancies, 24 months to August 2026. Rates are psf/month; sizes are the median floor area rented.
What the table shows:
- Size explains part of the gap. In Klang and Port Klang the median detached tenancy was 15,090 sq ft against 8,630 sq ft for semi-D, and in Kapar 17,880 against 9,520. Larger units rent for less per sq ft, so part of the detached discount is simply size.
- Size does not explain all of it. In Shah Alam the median units are close in size (9,170 and 8,810 sq ft), yet detached registered RM1.50 against RM2.12 for semi-D.
- In the south and east the order flips. Kuala Langat, Semenyih and Hulu Langat registered higher rates for detached than semi-D. Where tenancy counts are small (Subang semi-D: 7; Telok Panglima Garang semi-D: 9), one or two deals can move the median.
For a 20,000 sq ft need, the registered rates point to a detached unit in Klang or Kapar as the lower-rent option, while in the Petaling belt either type costs more. The choice between types should still follow your access, power and yard needs first.
How much cash do you need before moving in, for each size?
Direct answer: if the landlord asks for the common package (two months' security deposit, one month's utility deposit and one month's rent in advance), you need four months of rent before the keys: about RM50,800 for 10,000 sq ft, RM101,600 for 20,000 sq ft, RM244,000 for 50,000 sq ft and RM452,000 for 100,000 sq ft, plus stamp duty and legal fees.
| Item | 10,000 sq ft | 20,000 sq ft | 50,000 sq ft | 100,000 sq ft |
|---|---|---|---|---|
| Monthly rent at Selangor & KL band rate | RM12,700 | RM25,400 | RM61,000 | RM113,000 |
| Security deposit (2 months) | RM25,400 | RM50,800 | RM122,000 | RM226,000 |
| Utility deposit (1 month) | RM12,700 | RM25,400 | RM61,000 | RM113,000 |
| Advance rent (1 month) | RM12,700 | RM25,400 | RM61,000 | RM113,000 |
| Cash for deposits and advance rent | RM50,800 | RM101,600 | RM244,000 | RM452,000 |
| Stamp duty, term over 1 and up to 3 years | RM1,830 | RM3,660 | RM8,784 | RM16,272 |
The number of deposit months is negotiated in the letter of offer, and landlords often ask for more from new or foreign companies or where they pay for fit-out. Stamp duty on a tenancy is charged under item 49(a) of the Stamp Act 1949 at RM1, RM3, RM5 or RM7 for every RM250 (or part) of the average annual rent, for terms of up to 1 year, over 1 to 3 years, over 3 to 5 years and over 5 years, according to the LHDN stamp duty guideline. The tenant pays the duty on the agreement and the landlord pays on the copy, as LHDN's introduction to stamp duty sets out. The agreement must be stamped within 30 days of signing, and a late penalty applies after that, according to the LHDN STAMPS FAQ. The tenancy stamp duty calculator works it out for any rent and term.
If you open your own TNB account, TNB can collect a deposit of two months of estimated electricity usage, according to its security deposit page. That figure follows your connected load and usage, not your floor area, so a 20,000 sq ft warehouse can need a smaller deposit than a 10,000 sq ft machining plant.
What running costs come on top of the rent each month?
Direct answer: the rent itself, 6% service tax on it if your landlord is registered and you are not exempt, electricity and water for your load, and any maintenance or service charge in a managed park. Insurance, repairs and the council business licence vary by unit and operation.
Service tax on the rent
Rental of commercial and industrial property became taxable on 1 July 2025, at 8% to 31 December 2025 and 6% from 1 January 2026, according to the Customs Guide on Rental or Leasing Services (version 2, 14 May 2026). Only a landlord whose rental income exceeds RM1 million in 12 months must register and charge it. The size of your factory matters here:
| 10,000 sq ft | 20,000 sq ft | 50,000 sq ft | 100,000 sq ft | |
|---|---|---|---|---|
| Annual rent at Selangor & KL band rate | RM152,400 | RM304,800 | RM732,000 | RM1,356,000 |
| 6% service tax a month, if charged | RM762 | RM1,524 | RM3,660 | RM6,780 |
A 100,000 sq ft tenancy alone takes a landlord over the RM1 million threshold, so expect the tax at that size. Smaller units are taxed only if the landlord's total rentals cross the threshold. A tenant that is a micro, small or medium enterprise with annual sales of RM1.5 million or less can be exempted by registering in the Customs MyPMK system. Refundable deposits are not taxed, but a maintenance charge billed together with the rent, and utilities the landlord recharges to you, are taxed as part of the rental, according to the same guide. Bills you pay straight to TNB or the water operator are not.
Electricity, water and the rest
- Electricity: set by your machines and hours, not your floor area. Use your machine list to estimate the load before you sign, and check the unit's existing TNB supply.
- Maintenance or service charge: common in multi-tenant warehouses and managed parks; ask for the rate in writing and whether it is fixed for the term.
- Owner's outgoings: ask whether quit rent, assessment and building insurance stay with the landlord or are passed to you in the tenancy agreement.
- Repairs and insurance: the tenancy decides who repairs the roof, structure and services; contents and machinery insurance is yours.
Does factory rent include the office, parking and yard?
Direct answer: for a whole detached or semi-detached factory, the rent normally covers the building as one unit, so the office block and the parking inside the gate come with it. In multi-tenant warehouses and managed parks, parking bays and common areas may be charged separately as a service charge, which attracts service tax when billed with the rent.
What decides it is the description of the premises in the tenancy agreement. Check these points before you compare rents:
- The rented area: registered rents are per sq ft of floor area rented. Ask whether the quoted area includes the office floors and any mezzanine, and match it against the approved building plan.
- The lot: the agreement should name the lot and say whether you rent the whole lot or part of it. If only part, a plan showing your yard and parking should be attached.
- Parking and loading: count staff car bays, lorry bays and container turning space inside your boundary. Road-side parking is not part of the lease.
- Shared areas: in a shared compound, ask who controls the gate, guardhouse and loading area, and what you pay for them.
How do you set a realistic factory rent budget before viewing?
- Fix the floor area first: production, storage and office, then the yard and parking you need.
- Pick two or three areas and read their size bands on the transactions page.
- Multiply your size by the band rate, then add 6% service tax if it is likely to apply.
- Set aside four months of rent for deposits and advance rent, plus stamp duty, legal fees, the TNB deposit and fit-out.
- Adjust for specification: more power, higher clear height or dock levellers push rent above the band median.
- Ask for comparable registered deals before you counter an asking rent.
Common mistakes:
- Comparing asking rents with registered rents. Listings show what landlords hope for; registered tenancies show what tenants signed.
- Using sale prices as a rent guide. Registered sale prices per sq ft are per sq ft of land, while rents are per sq ft of floor area rented.
- Forgetting service tax at 50,000 sq ft and above, where the landlord is more likely to be over the threshold.
- Paying for area you cannot use, such as an unapproved mezzanine or an office larger than you need.
FactoryHub has separate guides on negotiating factory rent, service tax on factory rental and built-up versus land area for readers who need more on those points.
Costs, tax and financing: more questions
How much deposit do I need to rent a 20,000 sq ft factory?
At the Selangor and KL band rate the rent is about RM25,400 a month. A common package of two months' security deposit, one month's utility deposit and one month's advance rent comes to about RM101,600. Add stamp duty of about RM3,660 for a term of over 1 and up to 3 years, plus legal fees and any TNB deposit.
This guide is general information, not legal or tax advice. Rents are JPPH-registered figures; a specific unit can rent above or below them.
Ms Teh Seok Hoon gives monthly factory rent in Klang by size, and Jason Low breaks down Selangor rents from 10,000 to 100,000 sq ft for his areas.
Frequently Asked Questions
How much does it cost to rent a 20,000 sq ft factory in Selangor?
About RM25,400 a month, at the JPPH-registered Selangor and KL median of RM1.27 psf per month for units of 10,000 to 30,000 sq ft (24 months to August 2026). The area changes it most: about RM18,200 in Gombak District, RM24,600 in Klang and Port Klang, RM32,600 in Shah Alam and RM46,000 in Petaling Jaya. Add 6% service tax if your landlord charges it, and set aside about four months' rent for deposits and advance rent.
How much does it cost to rent a 50,000 sq ft factory or warehouse in Selangor?
About RM61,000 a month, at the JPPH-registered Selangor and KL median of RM1.22 psf per month for units of 30,000 to 60,000 sq ft (24 months to August 2026). By area that is about RM60,000 in Klang and Port Klang or Kapar, RM69,500 in Shah Alam and RM70,500 in Subang and Glenmarie. At this size the landlord is more likely to charge 6% service tax, about RM3,660 a month, and deposits plus advance rent come to about RM244,000.
How much is the rent for a 10,000 sq ft factory in Selangor?
At the registered Selangor and KL median rate of RM1.27 psf/month for 10,000 to 30,000 sq ft units, a 10,000 sq ft factory works out to about RM12,700 a month. By area it ranges from about RM9,100 in Gombak District to about RM23,000 in Petaling Jaya. Klang and Port Klang is about RM12,300 and Shah Alam about RM16,300, before any service tax.
How much does it cost to rent a 100,000 sq ft factory or warehouse in Selangor?
The registered Selangor and KL median for units of 60,000 sq ft and above is RM1.13 psf/month, so 100,000 sq ft is about RM113,000 a month. In Klang and Port Klang the band rate is RM1.09 (about RM109,000) and in Pulau Indah RM0.79 (about RM79,000). At this size, expect 6% service tax unless your company qualifies for the MyPMK exemption.
Is detached factory rent cheaper than semi-detached?
Per sq ft, usually yes in Selangor and KL: detached registered a median RM1.38 psf/month against RM1.75 for semi-detached. The gap is widest in Kapar (RM1.21 against RM1.85) and Shah Alam (RM1.50 against RM2.12). In Kuala Langat, Semenyih and Hulu Langat, detached registered the higher rate, so compare like-sized units in the same park.
Does factory rent include the office and parking?
For a whole detached or semi-detached factory, the office inside the building and the parking inside the gate normally come with the rent. In multi-tenant warehouses and managed parks, parking and common areas may be billed as a separate service charge. Check the premises description, the area the rent is based on and any attached plan in the tenancy agreement.
What is the average factory rent per square foot in Selangor?
Across 2,487 tenancies registered in Selangor and KL in the 24 months to August 2026, the median factory rent was RM1.54 psf/month, typically RM1.02 to RM2.24. By type, terrace factories registered RM1.62, semi-detached RM1.75, detached RM1.38 and stratified RM1.58. Larger units sit lower, at RM1.13 for 60,000 sq ft and above.
What kind of cost is factory rent?
Factory rent is a fixed overhead: it stays the same each month during the term, whatever your output, until a rent review. Deposits are not a cost but money held by the landlord and returned at the end, less any deductions. That is why the deposit and the monthly rent should be planned separately in your cash flow.
FactoryHub is dedicated to helping every client find the right factory or warehouse. To set a rent budget for your size and area, or to see units that fit it, contact Peter Tan (REN 12771) on 016-666 6872 or Jason Low (PEA 1478) on 012-288 1834.
