Key Takeaways
- Check your asking rent against registered rents first. JPPH-registered factory tenancies in Selangor and Kuala Lumpur over the 24 months to August 2026 had a median of RM1.54 psf a month (typical RM1.02 to RM2.24) across 2,487 tenancies. An ask above the band for your area and factory type is the usual reason a unit sits empty.
- Repair what a tenant would reject, do not renovate to your own taste. Fix the roof, drains, wiring and fire equipment, and have the papers ready: land title, CCC or CF, latest TNB bill and the fire certificate where the premises needs one. Leave office fit-out and special works to the tenant, with a rent-free fit-out period if needed.
- Market the specs, not just photos. Factory tenants filter by power supply, ceiling height, floor loading, container access and approved use. A listing that leaves these out loses the enquiry.
- An empty factory still costs money every month. Quit rent and assessment carry on, TNB charges a fixed RM20, RM200 or RM250 a month depending on supply voltage, and standard Malaysian fire policy wording stops cover on a building left unoccupied for more than 30 days unless the insurer endorses it.
- Part of it can be recovered. A council may refund assessment on a vacant building under section 162 of the Local Government Act 1976 if you give notice within 7 days and prove a reasonable rent and genuine marketing, and LHDN allows expenses during a vacancy that follows an earlier letting.
Why is my factory not renting out?
Most vacant factories fit one of four patterns. Work out which one you are in before you spend money on repairs or cut the rent.
| What you see | Likely cause | First thing to do |
|---|---|---|
| Few or no enquiries | Asking rent above the registered band, or the unit is hard to find for people searching | Compare with registered rents and relist with full specs |
| Viewings but no offers | Condition, power, height, access or layout does not suit the users who come | Ask every viewer, or their agent, exactly why they passed |
| Offers well below your ask | The market is telling you the rent | Recheck the band for your factory type, size and area |
| Deals collapse after the offer | Papers: no CCC or CF, approved use does not match the trade, fire certificate or TNB supply problems | Collect and check the documents before relisting |
A factory is not a house. The pool of tenants for any one unit is small and specific: a food processor, a logistics operator and a metal workshop each need different power, floors, drainage and approvals. The goal is to make your unit an easy yes for the users who fit it, not to please everyone.
How do I set the asking rent from registered rents?
Advertised rents show what owners hope for. Registered rents show what tenants actually signed and stamped. FactoryHub's industrial transactions pages aggregate JPPH-registered tenancies by area and factory type. They are the registered records available so far, not every unit rented, but they are the closest thing to a market rent you can check.
Registered factory rents, 24 months to August 2026
| Area | All factories: median (typical range) | Terrace | Semi-detached | Detached |
|---|---|---|---|---|
| Selangor & Kuala Lumpur | RM1.54 psf (RM1.02 to RM2.24), 2,487 tenancies | RM1.62 psf (1,084 tenancies) | RM1.75 psf (316) | RM1.38 psf (743) |
| Klang & Port Klang | RM1.43 psf (RM1.00 to RM1.90), 780 tenancies | RM1.47 psf (306) | RM1.78 psf (119) | RM1.22 psf (301) |
| Shah Alam | RM1.71 psf (RM1.28 to RM2.47), 119 tenancies | RM1.79 psf (46) | RM2.12 psf (24) | RM1.50 psf (34) |
| Puchong | RM2.14 psf (RM1.67 to RM2.52), 49 tenancies | RM2.18 psf (32) | RM2.65 psf (7) | no registered data |
Rents are per sq ft of rented floor area per month, from JPPH-registered tenancies. The typical registered term in each of these areas was 24 months.
Four steps to a realistic asking rent
- Find the band for your area and type. Open your area on the industrial transactions pages and read the median for your factory type, not the all-factory figure.
- Place your unit inside the band honestly. Above the median when it has more power, more height, better container access, newer condition and complete papers. Below it when it is older, sits on a narrow road, has low power or needs work. A median built on a handful of tenancies is a weaker guide than one built on hundreds.
- Price the whole package, not only the monthly rent. Rent-free fit-out time, who pays for reinstatement, lease length and the deposit all change what a tenant really pays. Say what you offer in the listing.
- Set a review date before you list. If the unit draws viewings but no offers by that date, the price or the unit has to change.
Why holding out for a higher rent rarely pays
Do the arithmetic before you turn down an offer. As an illustration only, not a real deal: a 10,000 sq ft semi-detached factory in Shah Alam at the registered median of RM2.12 psf would let for RM21,200 a month. Asking RM2.40 psf instead adds RM2,800 a month. One extra month empty loses RM21,200 of rent, which takes more than seven months of that premium to earn back, before counting the holding costs further down.
There is a second reason to stay inside the band. When you ask a council to refund assessment on a vacant building, section 162 of the Local Government Act 1976 requires you to prove "that the rent demanded is a reasonable one". Registered rents for your area are the most direct evidence you can show.
Should I repair or renovate the factory before renting it out?
Repair, yes. Renovate, rarely. Tenants walk away from defects that cost them time or risk, but they seldom pay more for finishes someone else chose.
Fix before you market
| Item | Why it matters to a tenant |
|---|---|
| Roof leaks, gutters, rusted sheets, blocked drains | Water damage to stock and machines is a deal breaker |
| Main switchboard, wiring, earthing and a live TNB supply | The tenant needs power from day one; a dead supply delays the move-in |
| Fire equipment serviced, fire certificate valid where the premises needs one | The tenant's licence and insurance depend on it |
| Previous tenant's leftovers cleared, floor cleaned, doors and roller shutters working | First impressions at the viewing |
| Papers ready: land title, CCC or CF, approved building plans, latest TNB bill, quit rent and assessment receipts | Serious tenants, and their banks or head offices, ask for these before signing |
Leave to the tenant, or negotiate
Office fit-out, partitions, air conditioning, epoxy floors, mezzanines, cranes and power upgrades beyond what the building has are use-specific. Doing them before you have a tenant risks paying for the wrong thing. The usual middle path is a rent-free fit-out period, or a landlord contribution written into the tenancy, with clear reinstatement terms.
How repairs and letting costs are treated for tax
LHDN Public Ruling No. 12/2018 lists ordinary repair to maintain the property in its existing state, and expenses to renew a tenancy or change tenant, as deductible against rental income. The costs of getting the first tenant (advertising, the legal cost of the agreement, stamp duty and agent commission) are initial expenses and are not deductible. This guide is general information, not legal or tax advice: check your own case with your tax agent.
What puts factory tenants off?
These are the points factory tenants check first, and the usual reasons a viewing goes nowhere:
- Not enough power. A tenant with a machine list knows the load they need. State the supply as shown on the TNB bill or switchboard; tenants can work out their own need with the factory power calculator.
- Missing or mismatched papers. No CCC or CF, an approved use that does not match the trade, or a lapsed fire certificate can block the tenant's business licence and insurance.
- Height, floor and access. Racking needs clear height, heavy machines need floor loading, and logistics users need container truck access and turning space.
- Visible condition. Leaks, stains, cracked floors and broken shutters make a viewer assume there are hidden problems too.
- Rigid terms. No fit-out time, unclear reinstatement, or outgoings that are not spelt out.
- Location fit. Flood history, road width and the route to the port or highway decide many shortlists before price does.
How do I market a vacant factory so the right tenant finds it?
- Write a one-page spec sheet. Land and built-up area, ceiling height, power supply, floor loading if known, loading bays and container access, office area, title and tenure, approved use, available date, asking rent and terms. Never guess a figure: leave a spec out until it is measured or on paper.
- Take photos and a short video of the approach road, loading area, floor, roof underside and switchboard, not only the front elevation.
- Brief an agent who works with industrial users and can share the unit with other agents. Check that the person is registered with BOVAEP by their REN, PEA or E number.
- Keep every advertisement and agent letter. Shah Alam City Council asks for a copy of the advertisement or the agent's letter as evidence when you claim a refund of assessment on a vacant building.
- Reply fast and show the papers early. Tenants who are ready to move decide on specs and documents, and a slow answer sends them to the next unit.
What does a vacant factory cost to hold?
| Cost | While vacant | Where to check |
|---|---|---|
| Quit rent (cukai tanah) | Payable as usual | Your land office bill; see our factory holding costs guide |
| Assessment (cukai taksiran) | Payable, but a refund can be claimed for vacant periods (below) | Your council's valuation department |
| TNB fixed charge | RM20 a month on low voltage, RM200 on medium voltage and RM250 on high voltage, plus any usage | myTNB tariff page |
| Fire insurance | Premium continues; cover can stop after 30 days unoccupied unless the insurer endorses it | Your policy wording |
| Loan interest, security, cleaning, grass cutting | Continue | Your own bills |
On the medium voltage general tariff, TNB also charges a capacity charge of RM29.43 and a network charge of RM59.84 per kW of maximum demand, so a vacant unit with almost no load mainly pays the fixed charge.
Can I get assessment tax back while the factory is empty?
Section 162 of the Local Government Act 1976 lets a council refund or remit part of the rate when a building is unoccupied and no rent is payable for at least one calendar month in a half year. The conditions:
- Written notice of the vacancy to the council within 7 days from the start of the period you claim.
- For a refund, a written claim not later than one month after the half year ends.
- Proof that the building is in good repair and fit for occupation, that every reasonable effort to find a tenant was made, that the rent asked is reasonable, and that it stayed vacant for the whole period. When the building is being repaired to make it fit for use, or is under genuine reconstruction, the first three points need not be proven.
The Act says the council "may" order the refund, so it is not automatic. Shah Alam City Council (MBSA) sets a minimum area of 1,000 sq ft for trade and industry holdings, asks for a copy of advertisements or an agent's letter, and takes claims in January for July to December and in July for January to June. Other councils apply the same section with their own forms, so ask your council's valuation department.
Can I still claim tax deductions while it is empty?
Under paragraph 8.4 of Public Ruling No. 12/2018, expenses for a period when the property is not rented out are not allowable, unless the vacancy comes after it has been let and it is clearly ready to be let again. Where letting stops temporarily because of repair or renovation, or tenants are absent for a period of 2 years after a tenancy ends, the expenses are allowable as long as the property is kept in good condition and ready to let. LHDN's own example allows 24 months of expenses for a 27 month gap and disallows the last 3. A factory that has never been let cannot deduct its costs before the first tenancy starts.
Is my fire insurance still valid if the factory is empty?
Malaysian fire policy wording, for example RHB Insurance's fire policy, says the insurance ceases to attach if the building becomes unoccupied and stays so for more than thirty days, unless the insurer agrees by endorsement on the policy. Tell your insurer the day the tenant moves out and get the endorsement in writing. Our factory fire insurance guide explains the rest of the policy.
Lower the rent, keep waiting or sell?
Put three numbers side by side: the monthly cost of holding (quit rent and assessment spread over twelve months, the TNB fixed charge, insurance, loan interest and upkeep), the rent you lose for each empty month, and the cut needed to sign a tenant now. If a year of the lower rent costs you less than one or two more empty months would, the cut is the cheaper choice. If the unit no longer suits what tenants in the area need, a sale may be the cleaner exit: our sell your factory page explains how a sale is priced against registered deals.
If the empty unit is in Klang, Ms Teh Seok Hoon covers what a Klang owner can change to let it; for Rawang, Serendah and Shah Alam, Jason Low looks at rent price, repairs and holding costs.
Frequently Asked Questions
Which industrial area makes it easiest to rent out a factory?
No area guarantees a tenant. A unit priced inside the registered rent band for its area and type, with the power, height, access and papers tenants need, lets fastest anywhere. For scale, Klang and Port Klang alone accounted for 780 of the 2,487 factory tenancies registered with JPPH in Selangor and Kuala Lumpur in the 24 months to August 2026, and terrace factories were the type let most often (1,084 tenancies). Check the median for your area and factory type on FactoryHub's industrial transactions pages before setting the rent.
Why is my factory not renting out?
Usually because the asking rent is above the registered band for its area and type, the unit lacks a spec tenants need (power, height, access or approved use), or papers such as the CCC or fire certificate are missing. Check registered rents first, then ask each viewer why they passed. Fix the cause before you cut the rent again.
How do I know if my asking rent is too high?
Compare it with JPPH-registered rents for the same area and factory type. In Selangor and Kuala Lumpur, 2,487 registered factory tenancies over the 24 months to August 2026 had a median of RM1.54 psf a month, with a typical range of RM1.02 to RM2.24. If you are above the typical range without better power, height or condition, the rent is likely the problem.
Can I get a refund of assessment tax when my factory is vacant?
Possibly. Section 162 of the Local Government Act 1976 lets a council refund or remit part of the rate for a building that is unoccupied with no rent payable for at least one calendar month in a half year. You must notify the council in writing within 7 days of the vacancy and prove the building is fit for use, the rent is reasonable and you tried to find a tenant.
Is my fire insurance still valid if the factory is empty?
Check your policy. Standard Malaysian fire policy wording stops cover on a building that stays unoccupied for more than 30 days unless the insurer agrees by endorsement. Tell your insurer when the tenant leaves and ask for the endorsement in writing.
Can I claim expenses on my tax while the factory is empty?
Under LHDN Public Ruling No. 12/2018, expenses during a vacancy are allowable if the factory was let before and is clearly ready to be let again. When tenants are absent after a tenancy ends, expenses are allowable for a period of 2 years while the property is kept in good condition. The costs of finding the first tenant are not deductible.
Should I renovate my factory before renting it out?
Repair, yes: roof, drains, electrical, fire equipment and cleaning. Renovation for a particular use, such as office fit-out, epoxy floors or a power upgrade, is usually better agreed with the tenant, for example through a rent-free fit-out period, so you do not pay for something the tenant does not want.
How much is factory rent per square foot in Selangor?
JPPH-registered factory tenancies in Selangor and Kuala Lumpur over the 24 months to August 2026 had a median of RM1.54 psf a month. By type, terrace factories were RM1.62, semi-detached RM1.75, detached RM1.38 and stratified RM1.58 psf a month. Areas differ: Klang and Port Klang recorded RM1.43 and Puchong RM2.14.
Have an empty factory or warehouse?
FactoryHub is dedicated to helping every client find the right factory or warehouse. If your unit is vacant, send us the address, land and built-up area, power supply, papers on hand and your asking rent, and we will compare it with registered rents and tell you plainly what is holding it back.
| Contact | Registration | Mobile / WhatsApp |
|---|---|---|
| Peter Tan | REN 12771, CID Realtors Sdn Bhd | 016-666 6872 |
| Jason Low | PEA 1478, CID Realtors Sdn Bhd | 012-288 1834 |
