Key Takeaways

  • No property type has an official or guaranteed yield in Malaysia. Work out the yield on the actual unit from registered prices and rents: JPPH-registered factory tenancies in Selangor and Kuala Lumpur in the 24 months to August 2026 had a median rent of RM1.54 psf a month and a typical term of 24 months.
  • Bank Negara's loan-to-value caps are housing caps: 70% from an individual's third house loan and 60% for house loans to companies. The margin on a shoplot or factory loan is each bank's own decision, and all property loans are capped at 35 years.
  • RPGT rates are the same for a factory, a shoplot or a house, but only a private residence can use the once-in-a-lifetime exemption, and a company pays 10% even after five years where an individual citizen pays 0%.
  • Rent from factories and shoplots has been a taxable service since 1 July 2025 (6% from 1 January 2026) once a landlord's rental passes RM1 million in 12 months; rent from a house is not.
  • The risks differ in kind: 33,094 completed homes were still unsold in the first half of 2026, while industrial property changed hands only 3,932 times nationwide in the same half year, so a factory has fewer buyers and must fit a tenant's specification.

This guide compares the three as investments on the points that decide the outcome. It is general information, not legal, tax or financial advice, and it promises no return.

What is the real difference between investing in a factory, a shoplot and a house?

The building type decides who your tenant is, which taxes apply, how much a bank will lend and how many buyers exist when you sell.

Point Factory Shoplot House
Typical tenant Manufacturer, warehouse or logistics business Shop, clinic, office or restaurant Household
Service tax on rent Yes, 6% from 1 Jan 2026 once the landlord's rental exceeds RM1 million a year Same as a factory No, housing accommodation is outside the tax
Bank Negara loan-to-value cap None in the housing measures; the bank decides None in the housing measures; the bank decides 70% from the third house loan (individuals); 60% for companies
RPGT private residence exemption Not available Not available Available once in a lifetime to citizens and PRs
Assessment rate in Petaling Jaya 5% of annual value 5% of annual value 4% (landed), 3% (flats and condominiums)
Transactions in Malaysia, first half of 2026 3,932 industrial 21,454 commercial 110,998 residential

Each row is explained below with its source.

Which gives a better rental yield: a factory, a shoplot or a house?

There is no official yield for any of the three, and a "guaranteed" percentage is a sales line, not a measurement. Gross yield is the annual rent divided by the price you pay; net yield first takes off assessment, quit rent, insurance, repairs, service charges and empty months. Our guide to rental yield on a factory works through both.

What registered factory figures show

FactoryHub aggregates JPPH-registered transfers and tenancies in Selangor and Kuala Lumpur industrial transactions. For the 24 months to August 2026:

Registered figure Terrace factory
Median price RM1.17 million (1,759 deals), RM518 psf of land, median land 2,002 sq ft
Median rent RM1.62 psf a month; RM3,700 a month for about 2,000 sq ft (1,084 tenancies)
Like-for-like price change, last 12 months vs the 12 before +8% across 91 parks
Like-for-like rent change, year on year +6% across 24 parks

As a rough check only: RM3,700 x 12 = RM44,400 a year, about 3.8% of RM1.17 million before any costs. The units that sold and the units that were rented are not the same buildings, so this is not the yield of any real factory. Use registered figures to test whether a seller's price and a tenant's rent are in line with the market, then work out the yield on the unit you are buying.

How to get registered figures for houses and shoplots

NAPIC, the property information centre of the Valuation and Property Services Department (JPPH), publishes Open Sales Data for residential, commercial and industrial transactions. Look up the same street or scheme, compare like with like (landed terrace with landed terrace, ground floor shop with ground floor shop) and use a real rent offer or a signed tenancy, never an advertised figure.

How long do tenants stay, and what does the law say about tenancy length?

The National Land Code (Act 828) treats all three the same way. A letting of three years or less is a "tenancy exempt from registration" (sections 213 and 223). A letting longer than three years is a lease that must be made in Form 15A and registered, for up to 99 years over a whole lot or 30 years over part of it (section 221).

What differs is how tenants behave and what protects the landlord:

  • Factory. JPPH-registered factory tenancies in Selangor and KL show a typical term of 24 months, from 2,487 recorded tenancies. Renewals matter as much as the first term: a tenant that has installed machinery, power upgrades or racking faces real cost and downtime to move.
  • Shoplot. The tenant pays rent out of its own trade at that address, so its ability to renew follows the business.
  • House. There is still no residential tenancy act. As of August 2026 the Residential Tenancy Bill had not been tabled in the Dewan Rakyat, FMT reported, so landlords and tenants rely on the tenancy agreement and the civil courts.

For any of the three, stamp the tenancy: duty depends on the annual rent and the term, and our tenancy stamp duty calculator works it out.

A landlord and a business tenant shake hands outside an open factory with a forklift inside
IllustrationA landlord and a business tenant shake hands outside an open factory with a forklift inside

How big is the vacancy risk for each?

Houses. NAPIC recorded 33,094 completed residential units worth RM17.78 billion still unsold in the first half of 2026, up from 30,471 units in the second half of 2025, the New Straits Times reported. Unsold completed serviced apartments rose to 23,375 units, and the Finance Minister II said the overhang was also heavily affecting the commercial segment, particularly serviced apartments. In Selangor, unsold completed residential units rose 69.8% year on year, The Star noted. Unsold homes nearby compete with yours for tenants and buyers.

Shoplots. Vacancy follows the street: footfall, parking, the trade mix and new shops completing nearby. Count the empty units in the row before you buy, and check registered sale prices in the same scheme.

Factories. Demand depends on specification. Power supply, ceiling height, floor loading, container access and the zoning on the title decide which tenants can use the building at all. A well specified factory in an active estate suits many users; an awkward one can wait a long time for the one tenant it fits.

Selling. The Edge reported 110,998 residential, 21,454 commercial and 3,932 industrial transactions nationwide in the first half of 2026. Fewer transactions means fewer buyers for a factory, so plan the exit before you buy.

How much can you borrow for each?

Bank Negara Malaysia's loan-to-value rules were written for house loans:

  • A maximum loan-to-value of 70% on the third house financing facility taken by a borrower, in force since 3 November 2010. Financing for the first and second homes is left to each bank's credit policy.
  • A 60% limit on housing loans to non-individuals (registered businesses) from December 2011, as BNM's Deputy Governor explained in 2014.
  • A maximum tenure of 35 years for financing to buy residential and non-residential properties, from 5 July 2013.

For shophouses, BNM abolished its 60% margin cap in October 1998 and left the margin to banks. Today the margin on a shoplot or factory is each bank's own credit decision, based on the valuation, the borrower and the tenant. The 70% cap counts outstanding house loans, so a factory or shoplot loan is not one of the three. Compare current offers on our commercial and factory loan rates page.

How does RPGT differ when you sell?

The RPGT rates do not depend on whether the property is a factory, a shoplot or a house. They depend on who sells and how long they held it:

Disposal Individual citizen or PR Company incorporated in Malaysia Non-citizen, non-PR
Within 3 years 30% 30% 30%
In the 4th year 20% 20% 30%
In the 5th year 15% 15% 30%
6th year onwards 0% 10% 10%

Two exemptions change the picture. Every individual gets RM10,000 or 10% of the chargeable gain, whichever is greater. A Malaysian citizen or permanent resident may also elect, once in a lifetime and irrevocably, to exempt the gain on a private residence; a factory or shoplot can never qualify. Many factory investors hold through a company, which pays 10% even after five years. Our RPGT guide for factories covers the forms and timing.

A terrace factory, a shophouse and a landed house side by side, each with a sale board in front
IllustrationA terrace factory, a shophouse and a landed house side by side, each with a sale board in front

What upkeep and running costs differ?

Assessment tax. Councils charge a percentage of the annual value, which is the estimated gross annual rent. In Petaling Jaya, MBPJ's rates are 4% for landed homes, 3% for flats, apartments and condominiums, 3.5% for serviced apartments, and 5% for both commercial and industrial holdings. Other councils set their own rates.

Service tax on rent. Under the Customs guide on rental or leasing services (version 2, to 14 May 2026), rent became taxable on 1 July 2025: 8% until 31 December 2025 and 6% from 1 January 2026, once a landlord's taxable rental passes RM1 million in 12 months. Housing accommodation, meaning a residential building on the title and including SOHO and serviced apartments, is not taxable. Tenants that are micro, small or medium enterprises with annual sales up to RM1.5 million and registered in the MyPMK system are exempt. Check MySST for later changes.

Strata charges. Strata shoplots, condominiums and stratified factories pay monthly maintenance charges plus a sinking fund of not less than 10% of those charges (Strata Management Act 2013, section 61(3)). A factory on its own individual title has no management body, so the roof, drainage, fire systems and electrical works are paid for directly by the owner or the tenant, as the tenancy agreement decides.

Quit rent and insurance. Quit rent follows the land category and area on the title, and fire insurance follows the building and its use. Get the actual bills and a quote before you work out net yield.

Which one suits which investor?

  • A house suits an investor with a smaller budget who wants the widest pool of tenants and buyers and may later use the private residence exemption. Watch the 70% loan cap from the third house loan and unsold homes in the area.
  • A shoplot suits an investor who understands local trade. The rent rises and falls with the tenant's business, and strata units carry monthly charges.
  • A factory suits an investor with a larger budget who can judge specifications and is comfortable with fewer, more specialised tenants and buyers. Registered prices and rents by estate are available, so the numbers can be checked before you commit.

Before you buy any of the three:

  1. Get registered prices and rents for the same estate or street, not asking prices.
  2. Work out net yield on the actual rent, after assessment, quit rent, insurance, repairs and empty months.
  3. Ask two or three banks for a written margin and rate.
  4. Work out RPGT for your likely holding period, as an individual or as a company.
  5. Check the title, land category and zoning and, for a factory, the power supply and the certificate of completion and compliance.

Practical steps: more questions

What are examples of commercial property?

Shoplots, offices, shopping complexes and hotels are commercial property. NAPIC counts serviced apartments in the commercial segment, although Customs treats them as housing accommodation for service tax.

With local yields: Ms Teh Seok Hoon compares a factory, shoplot or house in Klang, and Jason Low does the same for Rawang and Shah Alam.

Frequently Asked Questions

How can I build long-term passive income from factory investment?

A let factory can give steady rent, but it is not fully passive or guaranteed. Buy close to JPPH-registered prices for the estate and work out net yield after quit rent, assessment, insurance, repairs and empty months. Registered factory tenancies in Selangor and KL typically run 24 months, so expect to renew or re-let often. Rent at 3% to 4% gross rarely covers a large loan, so a bigger down payment builds income faster. Specifications many tenants can use (power, ceiling height, access) keep it let. Rent is taxable.

Is industrial property a good investment in Malaysia?

It can be, but no return is guaranteed. JPPH-registered factory tenancies in Selangor and Kuala Lumpur had a median rent of RM1.54 psf a month in the 24 months to August 2026, with a typical term of 24 months. Whether a particular factory is a good investment depends on its price, its rent, its specification and how many tenants and buyers it can serve.

Which type of property is best for investment in Malaysia?

There is no single best type. A house has the widest buyer pool and the private residence RPGT exemption, a shoplot depends on local trade, and a factory depends on its specification and a smaller pool of buyers. Compare net yield, financing, tax and exit for the actual unit.

What is the difference between residential and commercial property?

The land category and use on the title decide it. In Malaysia this changes the council's assessment rate (MBPJ charges 4% for landed homes and 5% for commercial holdings), whether rent is a taxable service, and whether Bank Negara's housing loan caps apply.

What is the difference between an investment property and an owner-occupied property?

An owner-occupied property is used by its owner, such as a factory a manufacturer runs from or a house the family lives in. An investment property is let to someone else for rent. The difference matters for the private residence RPGT exemption, which covers only a residence, and for net yield, because an owner-occupier saves rent instead of earning it.

How much loan can I get for a factory or shoplot?

Bank Negara's 70% and 60% caps apply to house loans, not to factories or shoplots, so the margin is each bank's own decision. The maximum tenure for residential and non-residential property financing is 35 years. Ask several banks for written offers before you sign.

Do I pay RPGT if I sell a factory after five years?

An individual Malaysian citizen or permanent resident pays 0% from the sixth year. A company incorporated in Malaysia pays 10% from the sixth year, and so does a non-citizen who is not a permanent resident.

Is rent from a shoplot or factory subject to service tax?

Yes, once the landlord's taxable rental exceeds RM1 million in 12 months. The rate is 6% from 1 January 2026. Rent from housing accommodation is not taxable, and qualifying small business tenants registered in MyPMK are exempt.

FactoryHub is dedicated to helping every client find the right factory or warehouse. If you are weighing a factory as an investment, Peter Tan (REN 12771, 016-666 6872) or Jason Low (PEA 1478, 012-288 1834) can put the registered prices and rents of the estate on the table first; no return is promised.