Key Takeaways
- Neither type wins on its own. A logistics warehouse is a plain, large box let to 3PL firms, couriers and distributors, and it re-lets on clear height, docks, floor strength and yard. A factory is let to manufacturers, who tend to stay once they have paid for power and fit-out, but a highly specialised factory has fewer possible next tenants.
- Lease length follows the tenant, not the label. Sale and leaseback deals announced by a listed REIT in 2026 ran from 5 years on Pulau Indah warehouses to 15 years on a Bandar Saujana Putra distribution centre, while the typical term of registered factory tenancies in Selangor and Kuala Lumpur is 24 months.
- Re-letting a big box takes quarters, not weeks: Axis REIT's Bukit Raja Distribution Centre was 58% occupied in the second quarter of 2026 and 77% in the third, with 91% targeted by January 2027.
- FactoryHub's JPPH-registered data gives factory rents and prices (a semi-detached factory in Klang and Port Klang works out at about 3.6% gross on medians) but no separate warehouse tenancy figures, so a warehouse yield has to be worked out unit by unit.
- Running production in a building approved as a warehouse is a material change of use that needs planning permission, and turning a factory into a warehouse can raise its fire resistance and sprinkler requirements. A building that meets the stricter standard of both keeps two pools of tenants.
Investors who already own one factory often ask whether the next purchase should be a logistics warehouse or another manufacturing factory. This guide answers that from the landlord's side: who rents each, for how long, how hard each is to re-let, which specifications keep their value, what FactoryHub's registered data can and cannot say about returns, and the approvals behind using one as the other. It is general information, not legal, tax or investment advice. For the building rules in detail, read our warehouse vs factory guide.
Is it better to invest in a logistics warehouse or a manufacturing factory?
Neither wins in every case. A logistics warehouse suits an investor who wants a plain building that many kinds of occupier can use and who can carry a re-letting gap on a large box. A manufacturing factory suits an investor who wants a tenant tied to the site by its own fit-out and who accepts fewer replacement tenants.
| Question | Logistics warehouse | Manufacturing factory |
|---|---|---|
| Who rents it | 3PL firms, couriers, e-commerce sellers, distributors, cold chain and dangerous goods operators | Manufacturers, from small workshops to plants that need a MIDA manufacturing licence |
| What keeps the tenant in place | Racking, dock equipment and its position on the delivery network | Power supply, machine foundations, cranes and process fit-out |
| What the next tenant looks for | Clear height, docks, yard, floor strength, sprinklers | Power, floor, height and an approved use that fits its process |
| Purpose group under the building by-laws | VIII, storage and general | VI, factory |
| Registered sales, Selangor and KL, 24 months to August 2026 | 41 warehouse deals | 1,759 terrace, 725 semi-detached and 306 detached factory deals |
The choice comes down to three questions: how many tenants could use the building if the current one leaves, how long a lease you can realistically get, and what it will cost to make the building fit the next tenant.
Who rents a logistics warehouse, and who rents a factory?
Logistics warehouse tenants
The Ministry of Transport's Guidebook to Starting Warehousing Business in Malaysia describes a warehouse as a point of transfer where goods are received and then despatched, and groups warehouses into general, cold storage, controlled humidity, flammable or hazardous, and shed or open storage. MIDA's Smart Logistics Complex guideline lists the logistics activities it supports: regional distribution centres (including bulk breaking, repackaging and labelling), integrated logistics services, dangerous goods storage and cold chain facilities.
For an investor, a general warehouse has the widest pool: almost any distributor or 3PL can use it. Cold stores and dangerous goods stores earn their keep from specialised fit-out, but fewer occupiers can take them over.
Manufacturing factory tenants
Factory tenants make, alter, assemble or treat goods. That is how the Industrial Co-ordination Act 1975 defines manufacturing, as quoted by MIDA, and a manufacturer with shareholders' funds of RM2.5 million or more, or 75 or more full-time employees, must hold a manufacturing licence. A manufacturer invests in power, machine bases, cranes, drainage and process approvals, which makes moving out costly. The flip side is that a factory fitted for one process (food, cleanroom, chemicals) appeals to fewer replacement tenants than a plain one.
How long do warehouse and factory tenants sign for?
Malaysian land law sets the frame. Under the National Land Code, a tenancy of up to three years is a "tenancy exempt from registration" (sections 213 and 223) and can be made in any written form or even by word of mouth. A lease of more than three years is granted under section 221 by a registrable instrument, up to 99 years for a whole lot and 30 years for part of one.
What tenants actually sign varies by tenant, not by building type:
| Example (2026) | Building | Occupier | Term |
|---|---|---|---|
| Registered factory tenancies, Selangor and KL | Factories of all types | Mixed | Typical term 24 months |
| Bandar Saujana Putra, Selangor (The Edge) | 355,023 sq ft distribution centre | City-Link Express, courier | 15-year leaseback |
| Taman Perindustrian Pulau Indah, Klang (The Star) | Three warehouse blocks | Megalift, warehousing | 5-year leaseback |
| Padang Meha, Kedah (The Star) | Battery manufacturing complex | WH Union, master lessee | 6-year leaseback |
Incentives can lengthen leases too. A logistics operator that leases a smart warehouse to claim MIDA's Smart Logistics Complex incentive must take a lease of at least 10 years, and the complex must have a built-up area of at least 30,000 m².
The pattern for an investor: long leases come from tenants who have sunk money into the building or need the term for an incentive. A plain unit let to a small occupier is more likely to sit on the two year terms seen in the registered data.
How big is the vacancy and re-letting risk?
A large single-tenant box can lose most of its income in one lease expiry, and filling it again takes time. Axis REIT, a listed industrial landlord, shows this in public. Its portfolio occupancy fell to 93% in the second quarter of 2026 from 97% a year earlier, mainly because of the re-tenanting of Bukit Raja Distribution Centre and a lease expiry at Axis Shah Alam Distribution Centre 3 (The Star, 3 August 2026). Bukit Raja Distribution Centre was 58% occupied in that quarter. By the third quarter it reached 77%, with 91% expected by January 2027, while Shah Alam Distribution Centre 3 was full again and new vacancies opened at Shah Alam Distribution Centre 5 and a Senawang industrial facility (The Star, 2 November 2026).
Three lessons follow:
- Size cuts both ways. A big warehouse earns one large rent but depends on few possible tenants; a building that can be split into smaller lettable parts re-lets in stages.
- Specialisation narrows the pool. A factory fitted for a single process may wait for the right manufacturer, while a plain factory or general warehouse suits many occupiers.
- The exit is thinner for warehouses. JPPH-registered transactions in Selangor and Kuala Lumpur recorded 41 warehouse sales in the 24 months to August 2026 (median RM8.7 million, RM170 psf of land, median land 65,208 sq ft), against 1,759 terrace, 725 semi-detached and 306 detached factory sales. Fewer, larger deals mean fewer buyers when you sell.
Klang has its own supply question; our partner site sets it out in is there an oversupply of factories and warehouses in Klang.
Which has a better return on investment, a warehouse or a factory?
No registered figure settles it. FactoryHub's JPPH-registered data gives factory rents and prices, and on those medians a semi-detached factory in Klang and Port Klang returns about 3.6% gross a year, but the data holds no separate warehouse tenancy figures. Compare the actual rent, lease length, outgoings and re-letting cost of each building instead.
What the registered transactions show (24 months to August 2026):
| Area and type | Median price | Median rent | Rent × 12 ÷ price |
|---|---|---|---|
| Semi-detached factory, Klang and Port Klang | RM5 million (172 deals), RM337 psf of land | RM15,000 a month for about 8,630 sq ft (119 tenancies) | 3.6% |
| Semi-detached factory, Selangor and KL | RM4.9 million (725 deals), RM375 psf of land | RM12,900 a month for about 7,960 sq ft (316 tenancies) | 3.2% |
| Warehouse, Selangor and KL | RM8.7 million (41 deals), RM170 psf of land | No separate registered warehouse tenancies | Not available |
| Warehouse, Klang and Port Klang | RM16.58 million (8 deals), RM129 psf of land | No separate registered warehouse tenancies | Not available |
These ratios set the median of one group of buildings against the median of another, so treat them as a check, not as the yield of any unit. Compare land psf only within the same building type: a warehouse plot (median land 155,145 sq ft in Klang and Port Klang) is not comparable with a semi-detached factory plot.
Over a holding period, return depends on more than the starting rent:
- Rent and step-ups agreed in the lease, and any rent-free fit-out period.
- Lease length and covenant: a 15-year lease to a company with a track record is worth more than a two year tenancy at the same rent.
- Empty months and re-letting works between tenants: docks, sprinklers, power or partitions for the next occupier.
- Capital value: like-for-like registered prices in Selangor and KL moved +8% for terrace factories (91 parks), +11% for semi-detached (28 parks) and -4% for detached (13 parks) over the last 12 months against the 12 before. There is no comparable series for warehouses.
The full method, with costs, empty months and loan cash flow, is in how to calculate factory rental yield.
Which building specifications hold their value?
Specifications decide how many tenants can use the building after the current one. The Ministry of Transport guidebook gives these reference points for warehouses.
Clear height
The operating height of a general warehouse usually does not exceed 7.5 m from the floor to the lowest point of the ceiling structure, but it may be raised for racking, leaving at least 0.5 m between the top of the storage system and the ceiling structure. Extra height lets a tenant rack higher on the same floor area, which widens the logistics pool. See factory clear height vs ceiling height.
Loading docks and yard
The guidebook recommends dock levellers where there is a raised dock, a raised dock height of 1 to 1.6 m, an aisle of at least 4 m along the docks, and a truck marshalling area extending not less than 35 m from the dock edge. A dock leveller can be fitted later; a yard too small for trucks to turn is far harder to fix.
Floor strength
The warehouse floor should be no less than 15 cm of reinforced concrete, thicker for heavier loads, and the aisle floors of high automated racking must be designed for the required strength. Work out what racking or machines need with the floor loading calculator.
Power
For a warehouse, the guidebook's first estimate for lighting, plugs and ventilation is 80 W per m². A factory needs whatever its machines draw, so spare power on site widens the pool of manufacturing tenants.
Fire protection
Under the Uniform Building (Amendment) By-Laws 2021, a single storey factory needs automatic sprinklers above 2,000 m², while a single storey warehouse of combustible goods needs them from 1,001 m², and pressurised hydrants as well above 10,000 m² or 70,000 m³. A sprinklered building is easier to let for either use.
Can production be carried out in a warehouse?
Only with approval. In building law a factory (purpose group VI) and a warehouse (group VIII) are different uses, and a material change in the use of a building counts as development that needs planning permission. Expect the council licence, the Bomba fire requirements and possibly a MIDA manufacturing licence to change as well.
Why it is a change of use
The Town and Country Planning Act 1976 defines development to include "the making of any material change in the use of any land or building or any part thereof", and section 19 forbids development without planning permission. Using part of a warehouse as a production floor is therefore a planning matter, not only a lease matter.
Where logistics ends and manufacturing starts
The Industrial Co-ordination Act counts making, altering, blending, finishing and the assembly of parts as manufacturing, but not activities normally associated with retail or wholesale trade. MIDA's logistics incentive, on the other hand, treats bulk breaking, repackaging and labelling, and value-added services such as product assembly or installation, as logistics work. Light value-added work can therefore sit inside a logistics operation, but where it stops is for the council and MIDA to confirm before a lease is signed.
What changes inside the building
The by-laws design a factory for one person per 10 m² of gross floor area and a warehouse for one person per 30 m². Worked through, a 3,000 m² floor is designed for about 300 people as a factory and about 100 as a warehouse, so a production floor often needs more or wider exits. Bomba also treats the two differently: a sprinklered factory becomes a designated premises needing a fire certificate from 2,000 m², and factories with hazardous processes are listed as well. The same source notes that a building without a valid certificate may find its insurance cover reduced.
For a landlord, the safe course is a lease that names the permitted use, makes the tenant obtain every approval before production starts, and requires the landlord's written consent to any change.
Can an industrial factory be converted into a logistics warehouse?
Usually yes, because industrial land may carry both factories and warehouses, but it is still a change of use and the building must meet storage rules. A single storey warehouse needs longer fire resistance than a factory once it passes 500 m², and sprinklers from 1,001 m² for combustible goods, so check fire protection, docks, floor and yard first.
The land title usually allows both
Section 117 of the National Land Code lets land in the "industry" category carry factories, workshops and warehouses for manufacture and for the assembling, processing, storage, transport or distribution of goods, unless an express condition on the title narrows that. The same section requires prior written consent before any building on such land is altered or extended.
The building rules are stricter for storage
For single storey buildings, the amended by-laws set these minimums:
| Floor area (single storey) | Fire resistance, factory | Fire resistance, warehouse | Sprinklers, factory | Sprinklers, combustible goods warehouse |
|---|---|---|---|---|
| Up to 500 m² | ½ hour | ½ hour | No | No |
| 501 to 1,000 m² | ½ hour | 1 hour | No | No, below 7,000 m³ |
| 1,001 to 2,000 m² | ½ hour | 2 hours | No (hose reels) | Yes |
| 2,001 to 3,000 m² | 1 hour | 2 hours | Yes | Yes |
| Above 3,000 m² | 2 hours | 4 hours | Yes | Yes, plus hydrants above 10,000 m² |
A storage building of 1,000 m² or more (or 7,000 m³ or more) fitted with sprinklers is a designated premises needing a Bomba fire certificate, half the 2,000 m² trigger for a sprinklered factory.
Steps to convert a factory into a warehouse
- Read the title for express conditions and confirm the approved use on the building plans.
- Ask the council whether the new use needs planning permission and amended building plans.
- Have a fire engineer check fire resistance, sprinklers, hydrants and the fire certificate for storage use.
- Check the dock height, the yard for container trucks and the floor for racking loads.
- Apply for the council licence for the warehousing activity.
And back again
Going from warehouse to factory reverses the questions: more exits for the higher occupant load, enough power for the machines, a MIDA licence where the thresholds are met, and any environmental approvals the process needs. A building planned from the start with storage-grade fire protection, spare power and a strong floor can switch between the two uses with the least work, which is the cheapest way to cut re-letting risk.
What mistakes do investors make?
- Buying a large box on the strength of one tenant without asking how long a box of that size takes to re-let.
- Assuming long leases are normal when the typical registered factory tenancy is 24 months.
- Letting a tenant start production in a warehouse before planning permission and Bomba approval are in place.
- Comparing a warehouse's price per sq ft of land with a factory's: the plots and buildings are not alike.
- Paying for a tenant's specialised fit-out without a lease long enough to recover it.
How the two differ on the ground: Ms Teh Seok Hoon on warehouse versus factory use in Klang and Port Klang, and Jason Low on the rules for each in Rawang, Serendah and Shah Alam.
Frequently Asked Questions
Is it better to invest in a logistics warehouse or a manufacturing factory?
It depends on the tenant pool you want to rely on. A general logistics warehouse suits many distributors and 3PL firms, while a factory relies on manufacturers who stay longer once they have invested in power and fit-out. Pick the building whose specifications suit the most possible next tenants.
Which has a better return on investment, a warehouse or a factory?
JPPH-registered data puts a semi-detached factory in Klang and Port Klang at about 3.6% gross on median rent and price, but there are no separate registered warehouse rents to compare. Return also depends on lease length, rent increases, empty months and capital value, so compare actual buildings and their leases.
Can production be carried out in a warehouse?
Not without approval. Production changes a storage building into a factory, which is a material change of use needing planning permission, and the council licence, Bomba fire requirements and possibly a MIDA manufacturing licence follow. Light repackaging and labelling can fall within logistics work, but confirm with the council first.
Can an industrial factory be converted into a logistics warehouse?
Usually, since industrial land may be used for both, but the council must approve the change of use and the building must meet storage fire rules. A single storey warehouse needs sprinklers from 1,001 m² for combustible goods and up to 4 hours of fire resistance above 3,000 m², against 2 hours for a factory.
What is an investment warehouse?
It is a warehouse bought to be let to a tenant rather than used by the owner, so its value rests on the rent, the length of the lease and the tenant's ability to pay. In 2026 Axis REIT agreed to buy two in Selangor on sale and leaseback, where the seller stays on as tenant for an agreed term.
How long is a typical warehouse or factory lease in Malaysia?
Registered factory tenancies in Selangor and Kuala Lumpur show a typical term of 24 months. Sale and leaseback deals run longer, from 5 years on Pulau Indah warehouses to 15 years on a Bandar Saujana Putra distribution centre in 2026. Terms over three years must be registered as leases under the National Land Code.
Do I need Bomba approval to turn a factory into a warehouse?
Usually yes, because storage carries stricter fire resistance and sprinkler rules than a factory. A sprinklered storage building of 1,000 m² or more needs a Bomba fire certificate, against 2,000 m² for a sprinklered factory. A fire engineer should check the building before you sign with a logistics tenant.
FactoryHub is dedicated to helping every client find the right factory or warehouse. To compare a warehouse and a factory you are considering, call Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.
