Key Takeaways

  • Yes, a factory can be refinanced in Malaysia. You can move the loan to another bank, borrow more against the same factory, or charge a factory you own outright. CIMB lists purchase, reloan and working capital as purposes of its SME Biz Property programme, OCBC refinances commercial property loans from other banks, and Bank Muamalat's Commercial Property Financing-i covers refinancing business premises.
  • How much cash comes out depends on the bank's current valuation, your company's accounts and the product. Published ceilings run from 90% (CIMB term loan, up to 25 years) to 105% of market value (Bank Muamalat) and 140% or RM5 million for companies at OCBC. Any figure above 100% lends more than the property is worth, and CIMB describes its 150% as property plus working capital financing.
  • You can charge an existing factory to buy another. The National Land Code allows second and subsequent charges, and a bank can take both factories as security. Before you sign, check the consolidation clauses, State consent on a leasehold title and how the interest will be taxed.
  • A factory loan can be paid off early, but the lock-in costs money. CIMB's disclosure sheet sets a 3-year lock-in with a 3% penalty on the approved loan amount; OCBC charges 2% of the facility limit. Islamic banks must grant ibra' (a rebate of unearned profit) and may only recover their actual costs, never lost profit, under Bank Negara's ibra' guidelines.
  • Company cash or bank loan has no single answer. Interest on money laid out on a factory used in your business is deductible, and a loan keeps cash in the business, but it adds stamp duty, legal fees, a charge on the title and bank conditions. Compare the after-tax cost of the loan with what that cash earns in your business.

Refinancing a factory means replacing or enlarging the loan secured on an industrial property you already own. Owners usually do it for one of three reasons: a better rate or longer tenure at another bank, cash for the business or a deposit for a second factory, or a switch to Islamic financing. This guide answers the five questions owners of detached and semi-detached factories, large warehouses and industrial land ask before they sign. It is general information, not legal, tax or financial advice; confirm your own case with your bank, lawyer and tax agent.

If you are still buying your first factory, our industrial property loan guide covers rates, margins and documents for a purchase, and the commercial and factory loan rates page keeps the banks' reference rates current. This guide starts where that one stops: after you own the factory.

Can a Factory Be Refinanced in Malaysia?

Yes. Malaysian banks accept a completed factory, warehouse or industrial lot as security for three kinds of facility:

Route What happens When owners use it
Refinance with another bank The new bank pays off the old loan, the old charge is discharged and a new charge is registered A better rate or tenure, or the old bank will not lend more
Top-up with the same bank Further money is added to the money already secured by the existing charge Cash for expansion with less paperwork
Charge a factory you own outright A first charge is registered on a title with no loan on it You bought with cash and now want working capital or a deposit for another property

What three banks publish for these facilities, checked on their own pages:

Bank and product Purpose stated Ceiling Tenure Lock-in and early settlement
CIMB SME Biz Property, term loan Purchase, reloan and/or working capital; commercial, industrial or residential property or vacant land as security Up to 90%; RM100,000 to RM20 million Up to 25 years 3 years from first disbursement; 3% of the approved loan amount
OCBC Commercial Property Loan Purchase, or refinance a commercial property loan held with another bank Companies: up to 140% of value or price, or RM5 million, whichever is lower Not stated on the page 2% of the facility limit if fully settled inside the lock-in
Bank Muamalat Commercial Property Financing-i Finance or refinance business premises, plus a cash line Up to 105% of open market value or SPA price Property: up to 15 years; cash line: up to 5 years, renewable Ibra' (rebate) granted on early settlement

Ceilings above 100% lend more than the property's value. CIMB's product page describes margins up to 150% "to access to property and working capital financing", and Bank Muamalat's illustration splits a 100% margin into 90% property financing and 10% cash line. Treat every percentage as the bank's ceiling for a strong borrower, not an entitlement.

How much cash can I take out of my factory?

Roughly: the bank's margin times its current valuation, minus what you still owe. For illustration, if a bank values a factory at RM8 million and lends 80%, the facility is RM6.4 million; with RM2.5 million still outstanding, about RM3.9 million is released before costs. What moves that number:

  • The valuation, not your purchase price. The panel valuer looks at registered sales of comparable factories, so check what the factory valuation guide says about comparables before you ask for a figure.
  • The building. A valuer checks the approved plans against what stands on site and asks for the CCC or CF. Ask how any extension built without approval will be treated before you rely on its value.
  • The title. Land category, express conditions, and on a leasehold the remaining term and whether the State must consent to a charge.
  • Your company. CIMB asks a Sdn Bhd for three years of audited and management accounts and six months of bank statements, plus proof of the property (title, SPA or existing loan offer).
  • What the cash is for. Working capital and a second business premises are assessed differently; tell the bank the purpose up front.

Does Bank Negara's 10-year cash-out limit apply to a factory?

Not to a company refinancing its factory for business. Bank Negara's Policy Document on Personal Financing (30 September 2025) treats extra financing above the balance refinanced under a home financing product for personal, domestic or household purposes as personal financing, capped at 10 years. Paragraphs 10.3 to 10.13 take effect on 1 January 2027, and the document excludes financing for the purchase of residential and non-residential property. A Sdn Bhd's factory facility is business financing, so the bank's credit policy sets the tenure, as the 25 and 15 year figures above show. The overall cap Bank Negara set in July 2013 is 35 years for financing to purchase residential and non-residential property.

How Does Refinancing a Factory Work, Step by Step?

  1. Read your current facility. Note when the lock-in ends, the early settlement fee, and any notice the bank needs before redemption. Ask for a redemption statement.
  2. Get indicative terms from two or three banks. The new bank's panel valuer inspects the factory; the valuation decides the facility.
  3. Check the letter of offer. Margin, tenure, rate spread, the new lock-in and its fee, guarantees and any covenant on leasing or further borrowing.
  4. Leasehold title: apply for State consent to charge. Under section 241(3)(b) of the National Land Code, the power to charge is subject to any restriction in interest on the title. Our State consent guide covers when it is needed and how long it takes.
  5. Sign and stamp. The charge is made in Form 16A (section 242). The facility agreement is the principal instrument and must be stamped within 30 days of signing under section 47 of the Stamp Act 1949; the charge backing it is then a collateral instrument at a maximum of RM10.
  6. Redeem and register. The new bank's lawyer pays the redemption sum, the old bank signs a discharge in Form 16N (section 278), and the discharge and new charge are presented at the land office. A charge takes effect on registration (section 243). A company borrower's charge is also lodged with SSM under sections 352 to 364 of the Companies Act 2016.
  7. Release. Whatever is left after the old loan and costs is paid to you.

There is no fixed timetable. A State consent application and land office registration both add time, so ask your lawyer for an estimate before you commit to a deadline that depends on the cash.

What does refinancing a factory cost?

Cost Rule Source
Early settlement fee on the old loan Only inside the lock-in: for example 3% of the approved amount (CIMB) or 2% of the facility limit (OCBC) Bank disclosure sheets
Stamp duty on the new facility 0.5% of the amount; an SME pays 0.05% on the first RM250,000 and 0.25% up to RM1 million of its loans in the calendar year, then 0.5% Stamp Act, item 27(a)
Stamp duty on a top-up with the same bank The same rates, on the further money only Stamp Act, item 27(e)
Legal fee on the facility 1.25% of the first RM500,000, 1% of the next RM7 million, negotiable above RM7.5 million (capped at 1%); a discount of up to 25% is allowed Solicitors' Remuneration Order 2023, Third Schedule and paragraph 6
Legal fee on the discharge RM400 for the first title or charge, RM100 for each additional one SRO 2023, Fourth Schedule
Lawyer's fee for a State consent to charge Not less than RM500 per application where the financing exceeds RM1 million SRO 2023, Fifth Schedule
Valuation, land office and other disbursements Varies by valuer and land office: ask for a written quote

For illustration, on a new RM5 million facility the scale legal fee is RM51,250 before any discount and tax, and loan stamp duty is RM25,000, or RM22,000 if the SME scale applies and this is the company's only loan that calendar year. If the old loan of RM4 million was approved less than three years ago at a bank charging 3% of the approved amount, add RM120,000. That last figure is why the lock-in date often decides when a refinance makes sense. The loan agreement stamp duty guide works through more cases.

A valuer with a clipboard inspects an empty factory with its owner before a refinance
IllustrationA valuer with a clipboard inspects an empty factory with its owner before a refinance

Can I Charge My Existing Factory to Buy a New One?

Yes. Section 241(2) of the National Land Code gives a proprietor the power to create second and subsequent charges, and a bank can take more than one property as security for a facility. There are three ways to structure it.

Option 1: Cash-out on the first factory, separate loan on the second

Refinance or top up factory A and use the cash as the deposit and costs for factory B, which carries its own purchase loan. Each factory has its own charge, so selling one later is simpler. The cost is two sets of legal fees and stamp duty.

Option 2: Both factories as security for one facility

The bank lends on factory B and takes factory A as additional security. This can lift the margin on B; CIMB's disclosure sheet notes that additional security such as fixed deposits or guarantors may be requested depending on the credit assessment. If factory A belongs to another company or to a director, it becomes a third-party charge and that owner signs as chargor.

Option 3: A second charge behind the existing bank

Factory A keeps its first charge and a second lender registers a second charge. This route depends on the first bank: the first chargee keeps the issue document of title, although it must produce it at the land office on your written request (section 244), and it may tack further advances that rank ahead of a later charge when its own charge authorises them (section 246). Ask both banks before you choose it.

What to check before you pledge a factory

  • Consolidation. Under section 245 you may discharge one charge without paying off a charge on another property, unless the charge expressly says otherwise. Read the cross-collateral and consolidation clauses before you put two factories with one bank, because they decide whether you can later sell one without settling both.
  • Leasing. Section 251 implies that the bank will not withhold consent to a lease or tenancy without reasonable cause, unless the charge says otherwise. Investors who plan to let factory B should still clear the bank's consent process first.
  • Insurance and repair. Section 250 implies, unless the charge excludes it, that you keep the buildings in repair and insured against fire to full value in the joint names of you and the bank.
  • Tax. LHDN's Public Ruling No. 2/2011 allows interest on money borrowed and laid out on assets used for producing business income; its own example allows a company's interest on a loan for a factory built for its own use. It also lists investments in landed property among non-business uses that can restrict the deduction under section 33(2). A second factory you let out is a rental source, not part of your manufacturing business. Plan the structure with your tax agent.
  • Leasehold consent on whichever title is charged.

Islamic Financing for a Factory: What Is Different?

The property, the valuation and the charge on the title are the same; section 241(5) of the National Land Code allows a charge in favour of a financial institution holding beneficial rights under a Shariah transaction. What changes is the contract, how the price is stated and what happens when you settle early. Non-Muslims can apply: Bank Muamalat states that Islamic banking "is open to everyone, regardless of faith".

How a Tawarruq property financing works

Bank Muamalat's disclosure sheet describes its Commercial Property Financing-i as Tawarruq: the bank buys a Shariah-compliant commodity and sells it to you at a selling price payable in instalments, then sells the commodity on your behalf for cash, and that cash is the financing. The Tawarruq transactions are done before disbursement.

Ceiling rate, selling price and ibra'

Islamic variable-rate financing states a ceiling profit rate (15% a year in both Bank Muamalat's sheet and CIMB's illustration) and charges you a lower effective rate. CIMB's ibra' illustration for SME Biz Property-i shows RM500,000 over 120 months with a sale price of RM968,009.74 at the ceiling rate and a monthly instalment of RM5,062. When the customer settles at the 26th instalment, the bank rebates RM418,367.86 of unearned profit as ibra', so the customer pays the instalment then due and the RM418,029.88 principal outstanding, not the RM836,397.74 of sale price still on the books. No early settlement charge was imposed in that example.

What the rules say about early settlement

Bank Negara's Guidelines on Ibra' for Sale-Based Financing require Islamic banks to grant ibra' to all customers who settle before the end of the tenure, including settlement through a restructuring. Charges for settling inside a lock-in must be a reasonable estimate of the bank's costs and must exclude the profit it would have earned had the financing continued.

Switching a conventional factory loan to Islamic

The Stamp Duty (Remission) Order 2010 remits the duty on a Shariah financing instrument made on converting an existing conventional loan, up to the duty on the outstanding principal, provided the old loan instrument was duly stamped. The new instrument must name the original lender and the outstanding principal. Ask the bank's lawyer whether your refinance qualifies before you budget the full 0.5%.

Point Conventional term loan Islamic financing (sale-based)
Price stated as Interest rate on the balance Selling price with ceiling and effective profit rates
Security Charge in Form 16A Same charge
Stamp duty Item 27(a) Item 27 covers Syariah financing at the same rates
Early settlement Fee set by the contract, for example 2% or 3% inside the lock-in Ibra' must be granted; any charge limited to the bank's actual costs

Can a Factory Loan Be Paid Off Early?

Yes. The cost depends on whether you are still in the lock-in and on the type of facility. On a conventional business loan, the fee is whatever the disclosure sheet and letter of offer set.

  • CIMB SME Biz Property: lock-in of 3 years from the date of first disbursement; early settlement penalty of 3.00% on the approved loan amount.
  • OCBC Commercial Property Loan: an early termination fee of 2% of the facility limit if you fully redeem or settle during the lock-in; the lock-in itself is set in the letter of offer.
  • Islamic financing: ibra' on unearned profit, with any lock-in charge limited to actual costs.

Two details matter on a large facility. Both fees above are worked out on the approved amount or limit, not the balance you still owe. And selling the factory or refinancing it elsewhere is a full settlement, so the lock-in applies to those too. Before you sign, ask whether partial prepayments inside the lock-in are allowed, how much notice the bank needs, and whether the fee can be shortened or waived in the letter of offer. After the loan is paid, the bank signs a Form 16N discharge, and your lawyer registers it so the title is clear. Paying off the loan from a sale price is a topic of its own, covered in our guide on selling a factory with an outstanding loan.

A factory owner hands an envelope to a bank officer to settle the loan early
IllustrationA factory owner hands an envelope to a bank officer to settle the loan early

Company Cash or Bank Loan: Which Is Better for Buying a Factory?

It depends on what the cash earns inside your business compared with the after-tax cost of the loan, and on how much liquidity you need to keep. Neither is right for everyone.

Point Pay with company cash Take a bank loan
Speed and conditions No valuation, loan approval or bank lawyer in the chain The SPA should be conditional on loan approval and valuation
Upfront cost Transfer stamp duty and SPA legal fee Add loan stamp duty (0.5%, or the SME scale), facility legal fee and valuation
Running cost No interest Interest or profit; the CIMB and Bank Muamalat products above float with BLR or BFR
Tax No interest to deduct Interest on money laid out on a factory used in the business is deductible (paragraph 33(1)(a), PR 2/2011)
Liquidity Cash tied up in land and building Cash stays available for stock, machines and payroll
Control of the title Clean title, free to lease or sell A registered charge; implied duties to insure and repair; leasing needs the bank's consent
Later flexibility You can still borrow against it later, as CIMB's "reloan" purpose shows Early settlement inside the lock-in costs a fee
Guarantees None Banks may require guarantees from owners, key directors or shareholders

A middle route

There are two: pay a larger deposit and borrow less, or buy with cash and arrange a facility on the unencumbered factory later. The second route keeps the purchase simple but means paying stamp duty, legal and valuation fees later instead of at purchase, and the loan will depend on the valuation at that time.

Questions to settle with your accountant and bank

  • What does each ringgit of working capital earn in your business, after tax?
  • What is the loan's rate after the interest deduction, and how much would a rise in rates add to the instalment?
  • How much cash must stay in the company for slow seasons, new orders or a machine upgrade?
  • Will the factory be used by the business, or let out? That changes how the interest is taxed.
  • Do you plan to sell or refinance within the likely lock-in?

Common Mistakes When Refinancing or Pledging a Factory

  • Refinancing inside the lock-in without pricing the fee on the approved amount.
  • Assuming the margin applies to what you paid; it applies to today's valuation.
  • Leaving unapproved extensions or a missing CCC until the valuer finds them.
  • Forgetting State consent on a leasehold title, which can delay release of the cash.
  • Charging two factories to one bank without reading the consolidation clause.
  • Using cash-out for an investment property and expecting the interest to be deducted against the business.

Owners asking these questions usually also ask what happens when a bank's valuation comes in below the purchase price, and how to sell a factory that still carries a loan; we cover each in its own guide.

Frequently Asked Questions

Can you refinance commercial property in Malaysia?

Yes. Banks refinance factories, warehouses and other commercial property: OCBC's Commercial Property Loan can refinance a loan held with another bank, CIMB's SME Biz Property programme lists purchase, reloan and working capital as purposes, and Bank Muamalat's Commercial Property Financing-i covers refinancing business premises. The amount depends on the bank's current valuation and your company's accounts.

Can I refinance my factory and get cash out?

Yes, if the bank's margin on today's valuation exceeds what you still owe. Published ceilings run from 90% (CIMB term loan) to 105% of market value (Bank Muamalat) and up to 140% or RM5 million for companies at OCBC; figures above 100% lend beyond the property's value. Budget for the old loan's lock-in fee, stamp duty and legal fees, which come off the cash released.

What is the discharge of charge procedure in Malaysia?

Once the loan is paid, the bank signs a discharge in Form 16N under section 278 of the National Land Code, and it is registered at the land office, which clears the charge from the title. In a refinance the new bank's lawyer pays the redemption sum and presents the discharge with the new charge. The scale legal fee for a discharge is RM400 for the first title.

Can I use my factory as collateral to buy another property?

Yes. The National Land Code allows second and subsequent charges, and a bank can take another property as additional security; CIMB's disclosure sheet notes that additional security may be requested after its credit assessment. The simplest structures are a cash-out on the first factory, or one facility secured on both. Check consolidation clauses, State consent on leasehold titles and how the interest will be taxed.

Is there Islamic financing for a factory, and can non-Muslims apply?

Yes. Banks offer Shariah-compliant property financing for business premises, such as Bank Muamalat's Commercial Property Financing-i (Tawarruq) and CIMB's SME Biz Property-i, and Bank Muamalat states that its Islamic products are open to everyone regardless of faith. The charge and valuation are the same as a conventional loan; the contract and early settlement rules differ.

Can I pay off my factory loan early without a penalty?

After the lock-in ends, usually yes. Inside it, conventional banks charge a fee set in the contract, such as 3% of the approved amount for CIMB's SME Biz Property within 3 years, or 2% of the facility limit at OCBC. Islamic banks must grant ibra' on early settlement, and Bank Negara limits any lock-in charge to the bank's actual costs.

How long is the lock-in period on a commercial property loan?

It is set by each bank and written into the letter of offer. CIMB's SME Biz Property disclosure sheet sets 3 years from the date of first disbursement; OCBC refers you to the letter of offer. Ask for the lock-in and fee in writing before you sign, and plan any sale or refinance after it ends.

Should my company buy a factory with cash or a loan?

Compare what the cash earns in your business with the after-tax cost of the loan. Interest on a loan for a factory used in your business is deductible under paragraph 33(1)(a) of the Income Tax Act, and borrowing keeps working capital free, but it adds stamp duty, legal fees, a charge on the title and possible directors' guarantees. Decide with your accountant.

FactoryHub is dedicated to helping every client find the right factory or warehouse. If you are weighing a refinance, a second factory or a sale, talk to Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834, both registered with BOVAEP under CID Realtors Sdn Bhd.