Semi-D Factory for Rent in Puncak Alam, Selangor

52 registered factory tenancies in Ijok & Puncak Alam are recorded in the available data for the 24 months to August 2026, at a median RM1.52 psf/month (typically RM1.08 psf/month to RM2.13 psf/month). By type: terrace factories RM1.51 psf/month, semi-detached factories RM2.21 psf/month, detached factories RM1.47 psf/month.

Based on the registered deals available so far, not every unit sold or rented.

Full Ijok & Puncak Alam transaction data (JPPH) →

Other Selangor areas with factories for rent now

Also listed in Puncak Alam

Looking for factories for rent in Puncak Alam? Tell us your size and budget and we will check what is available across the market: Peter Tan(REN 12771)016-666 6872WhatsApp orJason Low(PEA 1478)012-288 1834WhatsApp

A semi-detached (semi-D) factory in Puncak Alam shares a single common wall with the unit beside it while keeping its own land title, gated frontage and private yard. It is the practical middle ground for growing SMEs, more built-up area, ceiling height and lorry/container space than a terraced or link factory, yet a lower entry point than a fully detached unit. Semi-D factories in Puncak Alam, Selangor suit light-to-medium manufacturing, assembly, distribution and showroom-cum-warehouse operations that need their own loading bay and room to expand.

  • Own land title with private gated frontage and side yard
  • More built-up area and lorry access than a link factory
  • Lower entry cost than a fully detached unit
  • Ideal for light-to-medium manufacturing, assembly and warehousing

There are no live semi-d factory listings for rent in Puncak Alam on FactoryHub right now. New listings show here as soon as they are added; the areas and contacts above can help in the meantime.

Warehouses and factories in Puncak Alam: for sale and for rent

As of Oct 2026, FactoryHub lists 25 factories and warehouses for rent and 49 for sale in Puncak Alam, including 0 warehouses, 52 detached, 19 semi-D and 0 terrace factories, plus 17 industrial land plots. Peter Tan (REN 12771) and Jason Low (PEA 1478) handle viewings and offers on all of them, and co-broke other agencies' units too. Peter Tan · Jason Low

TypeFor saleFor rent
Detached factories34median RM 473 psf18median RM 1.90 psf
Semi-D factories15median RM 486 psf4median RM 2.34 psf
All factories & warehouses49median RM 481 psf25median RM 2.08 psf
Industrial land16median RM 80 psf1
  • Detached factories for rent in Puncak Alam: 18 listed, typical asking RM 1.70 to RM 2.14 psf a month.
  • Detached factories for sale in Puncak Alam: 34 listed, typical asking RM 399 to RM 503 psf.
  • Semi-D factories for rent in Puncak Alam: 4 listed, typical asking RM 2.29 to RM 2.76 psf a month.
  • Semi-D factories for sale in Puncak Alam: 15 listed, typical asking RM 454 to RM 610 psf.
  • Industrial land for rent in Puncak Alam: 1 listed.
  • Industrial land for sale in Puncak Alam: 16 listed, typical asking RM 65 to RM 120 psf of land.

Puncak Alam Industrial Property Guide

Located in the Kuala Selangor District, approximately 20 km northwest of Shah Alam, Puncak Alam is rapidly transforming into a premier destination for industrial property seekers. With JPPH-registered industrial land in mature Shah Alam at a median of RM210 psf of land, against RM90 in Ijok & Puncak Alam, this township offers a strategic, cost-effective alternative without compromising on connectivity.

The Puncak Alam Industrial Park is the centrepiece of this growth. It features 19 build-to-suit detached factory units on land plots ranging from 0.6 to 2.4 acres (approx. 27,051 to 106,374 sq ft). Built-up areas span from 14,114 to 73,437 sq ft, with 12-metre ceiling heights and a floor loading capacity of 3 tonnes per m². These specifications make the park ideal for large-scale operations, heavy machinery, and high-density storage. The industrial zoning permits mechanical or chemical processing, 3-phase power, and loading bays, with proper buffer zones from residential areas.

Read the full Puncak Alam industrial property guide →

Puncak Alam industrial property guides

Area contact: Ms Teh Seok Hoon covers the area in more depth on the Puncak Alam industrial property page of her own site, with its estates, roads and the rent and sale market.

Industrial Property Specialists for Puncak Alam

Looking for a BOVAEP-registered specialist who genuinely knows factories, warehouses and industrial land in Puncak Alam, Selangor? FactoryHub was founded by Peter Tan (REN 12771), with 12+ years in Malaysian industrial property and active deal flow across Puncak Alam and its surrounding industrial belts, working alongside Jason Low (PEA 1478). One dedicated contact takes your full brief, co-brokes the whole market, and comes back only with Puncak Alam units that genuinely fit, usually within hours and at most 48 hours. 📞 Peter 016-666 6872· Jason 012-288 1834

Local agent page: Industrial property agent in Puncak Alam

Need help finding a property in Puncak Alam?

Puncak Alam Semi-D Factory FAQ

Common questions about industrial property in Puncak Alam, answered with live data from our listings.

What is a semi-D factory?
A semi-detached (semi-D) factory shares one common wall with the unit next to it while keeping its own land title, frontage and side/rear yard. It gives more space and loading access than a link factory without the cost of a fully detached unit.
Who is a semi-D factory in Puncak Alam best suited for?
Semi-D factories in Puncak Alam suit growing SMEs in light-to-medium manufacturing, assembly, distribution and showroom-cum-warehouse use, businesses that need their own lorry/container access and room to expand, but want a lower entry cost than a detached factory.
How many Semi-D factory listings are for rent in Puncak Alam?
There are currently no Semi-D factory for rent in Puncak Alam, Selangor listed on FactoryHub. New units appear regularly, call 016-666 6872 and we will alert you when a matching unit goes live.
How much deposit do landlords ask for when renting a Semi-D factory in Puncak Alam?
The usual package is a two-month security deposit, a one-month utility deposit and one month's rent in advance. Landlords often ask for more when the tenant uses a lot of water or power, runs a dirty or polluting process, is a newly registered or small company with no track record, or is a foreign company. The same applies when the landlord pays for fit-out such as three-phase power, offices, a crane or floor strengthening (often with a longer tenancy too), when heavy machinery or high floor loads may damage the floor, when the business stores flammable goods, chemicals, batteries or plastic resin, when CTOS or CCRIS shows unpaid debts or court cases, and when the unit comes with equipment such as cold rooms, cranes, goods lifts or a substation. Large or listed companies can sometimes negotiate less.
What facility specs are available in Puncak Alam Semi-D factory?
Across our current Puncak Alam Semi-D factory listings, common spec features mentioned by agents include High Amperage Power, Floor Loading, High Ceiling, Racking System and Overhead Crane. Use these as filter keywords or call 016-666 6872 to confirm exact specs for any unit.
Should I rent or buy a Semi-D factory in Puncak Alam?
Renting suits shorter operations (registered factory leases typically run 24 months), market-testing, or preserving cash. Buying suits operations of 5 years or more and builds equity, but needs a down payment (banks publish maximum margins of 85% to 90% of value) plus legal fees and stamp duty. We list both options, switch the "For Sale" tab above to compare sale inventory in the same area, or call 016-666 6872 for a free consultation.
Do I have to pay SST on factory rentals in Puncak Alam?
Only if the landlord is SST-registered with Royal Malaysian Customs (RMCD). When registered, 6% service tax is added on top of the monthly rental (reduced from 8% on 1 January 2026). Always confirm SST status with the agent before signing the tenancy agreement, it is part of the standard pre-letting checks FactoryHub agents perform.
How do I arrange a viewing in Puncak Alam?
Click any listing card above to see the agent details, or call FactoryHub directly at 016-666 6872 / WhatsApp us. Site visits are usually arranged within 24 to 48 hours; bring a list of must-have specs (size, ceiling height, power supply, loading bay count) so the visit is productive.