Key Takeaways
- A registered lease of more than three years binds you. Under the National Land Code, a buyer holds the land subject to every registered lease (section 215), and each term of it becomes enforceable by and against the buyer (section 216).
- A tenancy of up to three years binds you by law only if it was endorsed on the title before your transfer took effect (sections 213(3) and 316). If your SPA says you buy "subject to the existing tenancy", you have agreed to honour it anyway.
- Most factory tenancies are short. In Klang and Port Klang, JPPH-registered factory tenancies in the 24 months to August 2026 show a typical term of 24 months, so the endorsement and the SPA wording usually decide the question.
- Read the tenancy before you pay the earnest deposit: term, renewal option, any option for the tenant to buy, rent review, deposits, who pays outgoings, permitted use, alterations and stamping.
- If you need the factory for your own use, buy with vacant possession written into the SPA. A tenant who stays on after the tenancy ends can only be removed through the court (Specific Relief Act 1950, section 7(2)).
Many factories come to market with a tenant still running a production line inside. For an investor, that can mean rent from the first month. For a manufacturer who wants to move in, it can mean waiting years. The answer sits in three documents: the title, the tenancy agreement and the sale and purchase agreement (SPA). This guide is written for buyers; if you are the tenant, read what happens to your tenancy when the landlord sells. It explains the law in general terms and is not legal or tax advice.
Is an existing tenancy binding on the buyer of a factory?
It depends on how the letting was made and protected. The National Land Code (revised in 2020 as Act 828) draws the line at three years:
| Type of letting | What the Code says | Does it bind the buyer? |
|---|---|---|
| Lease of more than 3 years, registered | Granted under section 221 and registered on the title | Yes. The buyer holds the land subject to any registered lease (section 215(3)(a)) |
| Tenancy of up to 3 years, endorsed on the title | A "tenancy exempt from registration" (section 213), protected by endorsement under section 316 | Yes, if endorsed before the transfer to you takes effect |
| Tenancy of up to 3 years, not endorsed | Valid between landlord and tenant, written or oral (section 213(2)) | Not by force of the Code (section 213(3)), but see the SPA point below |
| Any tenancy your SPA says you take subject to | A contract you signed | Yes, by contract |
What "subject to the tenancy" means for you
Where land is transferred subject to a lease or tenancy, section 216 makes every term of it, express or implied, enforceable by or against the buyer as if the buyer were a party, and implies that the buyer will indemnify the seller against claims arising after the transfer. In plain terms, you step into the landlord's shoes: you collect the rent, and you carry the landlord's promises, such as repairs the tenancy puts on the landlord and the refund of deposits at the end.
Why the endorsement question comes up so often
JPPH-registered transactions for Klang and Port Klang record 780 factory tenancies in the 24 months to August 2026, with a typical term of 24 months. Lettings of that length are tenancies exempt from registration, so a buyer's position usually turns on two things: whether the tenancy was endorsed on the title, and what the SPA says. An unendorsed tenancy does not bind you by statute, but a seller who sells "subject to the existing tenancy" will write exactly that into the SPA, and you are bound once you sign.
A land search shows registered leases, endorsed tenancies and charges. Section 215(3)(d) also makes the buyer take the land subject to "all other matters then appearing on, or referred to in, the register document of title", so read the search before you sign anything.
What should you check in the tenancy agreement before you buy?
Ask for the signed tenancy agreement and every letter that varies it before you pay the earnest deposit. Then go through it clause by clause:
| Clause | What to look for | Why it matters to a buyer |
|---|---|---|
| Parties and premises | Who the landlord is, whether the whole lot or only part is let, any plan attached | Endorsing a letting of part of a lot needs a plan and description (section 316(2)(a)) |
| Term and expiry | Start date, expiry date, how much of the term is left | Decides when you can occupy or re-let |
| Option to renew | Further term, rent formula, notice period | Section 228(1)(a) allows a tenancy to give the tenant the right to a further term |
| Option to purchase or first refusal | Any right for the tenant to buy | Section 228(1)(b) allows an option to purchase the reversion; an option in an oral tenancy is not enforceable against a buyer (section 228(2)) |
| Rent and review | Amount, review dates, whether service tax is added | Your income and the valuation rest on it |
| Deposits | Security deposit, utility deposit, when they are refunded | You owe the refund if you take over the tenancy |
| Outgoings | Who pays quit rent, assessment, insurance, repairs and maintenance | Changes your net return |
| Permitted use | What the tenant may do in the building | A use that breaks zoning or approvals becomes your problem as owner |
| Alterations and reinstatement | Mezzanines, wiring, racking, partitions, and who removes them at the end | Fit-out left behind may need approval or removal |
| Termination and sale clause | Break rights, termination on sale, default | A sale clause may let you end the tenancy; a tenant break right may end your income early |
| Bank consent | Whether the seller's bank consented in writing | Section 226 says an owner whose land is charged cannot grant a tenancy without the chargee's consent |
| Stamping | The stamp certificate on the agreement | An unstamped tenancy is a gap the seller should close before completion |
Documents to ask the seller for
- The signed and stamped tenancy agreement, renewal letters and any side letters.
- Rent records for the last 12 to 24 months, and a statement of any arrears.
- Receipts for the security and utility deposits.
- A recent land search, and the bank's written consent to the letting if the factory is charged.
- The approvals behind the tenant's alterations, if any.
- A confirmation letter signed by the tenant stating the rent, the deposits held, the expiry date, any options, and that there are no other agreements or disputes.
Visit while the tenant is working
A tenanted factory is easy to inspect and hard to judge from paper alone. Walk through during working hours and note the process, the machines and power in use, any chemicals, extensions and mezzanines, and the state of the roof, floor and drains.
What happens to the deposits, rent and arrears on completion?
No statute moves the tenant's deposit from the seller to you; the SPA has to do it. Because section 216 makes the tenancy's terms enforceable against the buyer, a tenant may look to you for its deposit at the end of the term, so make sure the money comes with the factory. Settle these points in the SPA:
- Deposits: the seller pays or credits the security and utility deposits to you at completion, usually as a deduction from the balance price, and you take over the duty to refund them.
- Apportionment: rent, quit rent and assessment for the completion period are split by days between seller and buyer.
- Arrears: rent unpaid before completion stays with the seller to collect, unless you agree otherwise; ask for a warranty that there are no arrears.
- Seller's warranties: the copy you were given is the whole agreement, there are no side deals, rent concessions or disputes, and nothing will be varied between the SPA and completion without your consent.
- Notice to the tenant: a joint letter from seller and buyer telling the tenant to pay rent to you from a set date.
- Insurance: arrange your own building cover from completion.
Our factory SPA guide covers the other clauses, from conditions precedent to the completion period.
Can you get a loan for a tenanted factory, and how is it valued?
A tenancy does not stop you borrowing, but it shapes both the valuation and the bank's conditions.
How a valuer treats the rent
The Board of Valuers' standard on methods of valuation says that under the investment method, gross income must be established "by reference to prevailing rental values of similar properties", the valuer must indicate whether the rents used are sustainable, and must explain any decision not to use the current rent passing. In practice:
- A rent above market may not be counted in full, so a high rent does not automatically lift the valuation.
- A long tenancy at a rent below market can weigh on value until it ends.
- The valuer will also look at registered sales of comparable factories.
Our factory valuation guide explains the methods and the difference between market value and a bank valuation.
What the bank will ask
Tell the bank at the start that the factory is tenanted, and give it the tenancy agreement and rent records. Ask whether it will count the rent when it assesses your repayment ability, and whether it needs anything from the tenant. Once your bank's charge is registered, section 226 means any new tenancy or renewal you grant needs the bank's written consent, so allow time for that before the tenant's renewal date. Compare current financing rates on our commercial loan rates page.
Can you get vacant possession of a tenanted factory?
Only on the tenancy's own terms, or by having the seller deliver it empty before completion.
If you need the factory for your own use
Write vacant possession into the SPA: the seller ends the tenancy under its terms and hands over the factory empty on completion. Tie it to a date and give yourself a remedy if it is not delivered, such as the right to terminate with a full refund or an extended completion date. Do not rely on a verbal promise that "the tenant will move out". If the tenancy binds you and has years to run, the price should reflect that you cannot move in.
If you buy subject to the tenancy and later want the factory back
You can end the tenancy only as it allows: at expiry, under a notice or break clause, or for the tenant's breach. If the tenant stays on after the tenancy has ended, section 7(2) of the Specific Relief Act 1950 says the person entitled to possession shall not recover it from the occupier "otherwise than by proceedings in the court". Changing the locks or forcing the tenant out yourself is not the route.
Double rent when a tenant holds over
Section 28(4)(a) of the Civil Law Act 1956 lets a landlord charge a tenant who holds over after the tenancy ends double the rent until possession is given up. In Rohasassets Sdn Bhd v Weatherford (M) Sdn Bhd, decided on 26 November 2019, the Federal Court held that the landlord does not have to show the tenant acted contumaciously. It still dismissed the landlord's appeal, because the tenants had held over with the landlord's consent until the notices to quit expired. The lesson for a new owner: serve a clear notice to quit and keep every letter.
When is a tenanted factory worth buying?
It depends on whether you are buying for income or for your own operations.
For an investor
A tenanted factory can make sense when:
- the rent sits within the range registered for similar factories in the same area;
- the remaining term and renewal options fit how long you plan to hold;
- the tenant's business suits the building (power, floor loading, access) and has a payment record you can see;
- the deposits cover a realistic period of default and reinstatement;
- the tenant's use is lawful under the zoning and approvals.
For comparison, JPPH-registered transactions for Klang and Port Klang over the 24 months to August 2026 show these medians:
| Factory type | Median registered rent | Tenancies recorded |
|---|---|---|
| Terrace factory | RM1.47 psf/month | 306 |
| Semi-detached factory | RM1.78 psf/month | 119 |
| Detached factory | RM1.22 psf/month | 301 |
| All factory tenancies | RM1.43 psf/month (typical RM1.00 to RM1.90) | 780 |
These are the registered records available so far, not every tenancy in the area. A rent far above these figures deserves a second look: it may reflect fit-out or services the landlord provides, or it may not survive the next renewal.
To work out the return, gross yield is the annual rent divided by the purchase price, times 100. Net yield takes off quit rent, assessment, insurance, any repairs the landlord pays and an allowance for empty months between tenants.
For an owner-occupier
A tenanted factory works against you when you need to move in soon and the tenancy binds you for years, or when the tenant holds an option to renew or to buy. It can still work if the remaining term is short, if the SPA gives you vacant possession, or if you are content to collect rent and plan your move around the expiry date.
Red flags
- Rent arrears, disputes, or a tenant who will not sign a confirmation letter.
- A rent well above registered rents for the area, with no clear reason.
- An option to purchase or a right of first refusal in the tenant's favour.
- Alterations without approval, or a use the zoning does not allow.
- A tenancy granted on charged land without the bank's written consent.
Tax on the rent
Rent is taxable income. LHDN's Public Ruling No. 12/2018 explains when letting real property is a non-business source under paragraph 4(d) of the Income Tax Act 1967 and when it is a business source under paragraph 4(a). Service tax also applies to rental or leasing services: under the Customs Service Tax Policy No. 2/2025 (Amendment No. 5) dated 22 July 2026, the rate is 6% from 1 January 2026, and tenants with MSME status registered in the MyPMK system may be exempt, subject to conditions. Whether you must register and charge it depends on your rental turnover, so check with your tax agent before you price the deal.
Step by step: buying a factory with a sitting tenant
- Before the offer: get the tenancy agreement, rent records and a land search.
- Inspect during working hours and note the tenant's use, power and alterations.
- Choose your route: buy subject to the tenancy for income, or with vacant possession for your own use.
- Arrange the valuation and loan, telling the bank about the tenancy from the start.
- Negotiate the SPA: tenancy or vacant possession, deposits, apportionment, arrears, warranties and the tenant's confirmation letter.
- Before completion: check that nothing in the tenancy has changed.
- On completion: deposits credited, notice sent to the tenant, insurance in your name, rent paid to you.
Buying in Klang with a tenant in place? Ms Teh Seok Hoon lists what to check on a tenanted Klang factory, and Jason Low weighs a tenanted factory against vacant possession in Rawang and Shah Alam.
Frequently Asked Questions
I want to invest in a factory with a long-term MNC tenant. What risks should I watch for?
The main risk is that all your income depends on one tenant, so check the lease more than the brand. See which company signs (often a local subsidiary, so ask whether the parent guarantees the rent), the unexpired term, any break clause, and options to renew or buy. Compare the rent with JPPH-registered rents for the area, because a rent far above them may not survive renewal. Check reinstatement and who pays outgoings, and that a lease over three years is registered. Ask your lawyer to read the lease and title.
Is it safe to invest in a factory with a long-term lease?
It can be, if the lease is registered and the tenant is sound. A lease of more than three years must be registered at the land office, and a buyer then takes the factory subject to it, so the rent passes to you. Check the unexpired term and any break clause, the rent against registered rents for the area, rent reviews, who pays outgoings, any tenant option to buy, and the tenant's accounts and payment record. A long lease at a rent below market can lower the value. Have your lawyer check the title and lease.
Does a tenancy agreement continue after a property is sold in Malaysia?
The tenancy stays a valid contract between the tenant and the old landlord. It binds the buyer if it is a registered lease, if a tenancy of up to three years was endorsed on the title before the transfer, or if the buyer agreed in the SPA to take the property subject to it.
If I buy a factory with a tenant, can I ask them to leave?
Only on the tenancy's terms: at expiry, under a notice or break clause, or for breach. If the tenancy binds you, buying the factory does not let you end it early. If the tenant refuses to leave after the tenancy ends, you must go through the court.
Who keeps the tenant's deposit when a factory is sold?
Whoever the SPA says. The usual approach is for the seller to pass the deposits to the buyer at completion, often as a deduction from the balance price, and for the buyer to take over the duty to refund them. Check this before you sign.
Can I get a bank loan to buy a tenanted factory?
Yes, a tenancy does not stop you borrowing, but tell the bank early. The valuer will compare the rent with market rents and judge whether it is sustainable, and once your charge is registered you need the bank's written consent to grant any new tenancy or renewal.
Can the tenant buy the factory instead of me?
Possibly, if the tenancy gives the tenant an option to purchase or a right of first refusal. The National Land Code allows a tenancy to include an option to purchase the reversion, so look for one before you pay the earnest deposit.
Is it better to buy a factory with a tenant or a vacant one?
For an investor, a sound tenant at a market rent means income from the first month. For a manufacturer who needs the space, a vacant factory or a sale with vacant possession avoids waiting for the tenancy to end.
This guide explains the law in general terms and is not legal or tax advice. Ask a lawyer to check the title, the tenancy and the SPA for your own purchase.
FactoryHub is dedicated to helping every client find the right factory or warehouse. If you are weighing a tenanted factory, talk to Peter Tan (REN 12771, 016-666 6872) or Jason Low (PEA 1478, 012-288 1834).
