Key Takeaways

  • Check flood risk in four layers before you sign: the JPS records (the JPS Selangor InfoBanjir map and JPS flood data), the nearest live river station on Public InfoBanjir, the levels and drains you check on site, and what the owner, neighbours and an insurer tell you in writing.
  • The JPS Selangor InfoBanjir map lists flood hotspots and flood risk spots by year. Its 2025 and 2026 lists name industrial areas such as Kawasan Perindustrian Sg. Rasau in Klang, Taman Perindustrian Baru 22 in Ijok and Kawasan Perindustrian SB Jaya in Gombak, plus places beside industrial land in Meru, Bukit Raja, Telok Gong, Pulau Indah and Shah Alam.
  • There is no fixed "centimetres above the road" rule. The national drainage manual, MSMA 2nd Edition, requires building floor levels above the 100 year ARI flood level (a flood with a 1 in 100 chance in any year), so ask for the approved platform level and compare it on site with the road, the main drain and the loading bay.
  • A fire policy pays for flood only if the flood or special perils extension was in force before the water came. The insurers' association PIAM says only about 30% of fire policies carry it, and insurers covered only 20% to 30% of the economic losses of the December 2021 floods.
  • A factory that has flooded before can still be a sound purchase when the price, the floor and switchroom levels, the drains and a written flood quote from an insurer all fit your operation. If no insurer will quote flood cover for the address, treat that as your answer.

For a buyer spending RM3 million to RM20 million on a detached or semi-detached factory, or a tenant signing a five-figure monthly rent, one flood can cost more than a year of rent: stock on the floor, machines, the main switchboard, and weeks of orders that go to someone else. This guide shows where the official flood records are, what to measure on site, what to ask the owner and the insurer, and how to decide on a unit that has flooded before. It is general information, not legal, engineering or insurance advice.

How do you know if a factory is at risk of flooding?

No single map gives a yes or no for one lot. You build the answer from four sources and treat any one red flag as a reason to dig deeper before you pay a deposit.

Layer Where to check What it tells you
Official flood records InfoBanjir JPS Selangor map, the JPS district office, JPS data requests Whether the area appears in JPS flood lists or mapped flood-prone areas
Live river and rain data Public InfoBanjir The nearest station, its alert, warning and danger levels, and how fast it rises in heavy rain
Site levels and drains Your visit, the approved plans, a licensed land surveyor or engineer Whether the floor, loading bay and switchroom sit above the road, the drain and any past water mark
People The owner in writing, neighbours, the guardhouse, an insurer Past flood dates and depth, and whether flood cover is offered for the address

A new official layer is coming. On 11 August 2025 JPS Malaysia and JPS Selangor presented the Flood Hazard Map (Peta Kemungkinan Banjir) to the Selangor government. It identifies areas at risk of flooding from historical flood records, hydrological data and topographic analysis, and is meant to help the authorities plan, mitigate and prepare. Ask the JPS district office whether your lot falls in a mapped flood-prone area.

Which industrial areas in Selangor have flooded before?

The December 2021 flood hit industry in Shah Alam and Klang hardest, and the JPS Selangor lists for 2024 to 2026 still name several industrial areas and the villages beside them. Always check the exact lot: the lists name places, not every factory.

December 2021: the flood buyers still ask about

The Federation of Malaysian Manufacturers said damage to property, assets and products, and production disruption, hit industries in Shah Alam and Klang, among the worst-hit districts, and that blocked roads severely affected warehouse and logistics operations (FMT). One listed manufacturer told Bursa Malaysia that its plant in Seksyen 23, Shah Alam was affected and that it needed a week just to assess the machines and equipment that the water reached (The Edge). That week is the real cost: what stops a factory is wet machines, panels and stock, not wet walls.

What the JPS Selangor flood lists show

The InfoBanjir JPS Selangor map has two layers, Hotspot Banjir (flood hotspots) and Risiko Banjir (flood risk spots), each listed by year. We read the 2024, 2025 and 2026 lists on 15 November 2026. These are the entries a factory buyer or tenant should note:

Area as named by JPS District Layer and years
Kawasan Perindustrian Sg. Rasau Klang Risk spot 2025, 2026
Bukit Raja (Jalan Hj. Sirat, Taman Cempaka Sari) and Bandar Baru Bukit Raja Klang Risk spot 2025, 2026
Jalan Meru Batu 3 Klang Risk spot 2025, 2026
Pekan Meru (Jalan Meru Batu 6 and nearby roads) Klang Hotspot 2025, 2026
Kampung Bukit Kapar Klang Hotspot 2025, 2026
Kampung Telok Gong Klang Risk spot 2024, 2025, 2026
Pulau Indah (Kg. Sg. Pinang, Kg. Sg. Kembong, Sg. Daun) Klang Risk spot 2024, 2025; hotspot 2026
Taman Perindustrian Baru 22 and Baru 23, Ijok Kuala Selangor Risk spot 2025; Baru 22 again in 2026
Puncak Alam Kuala Selangor Hotspot 2024, 2025
Seksyen 13 Shah Alam, and Kampung Baru HICOM, Seksyen 26 Petaling Hotspot 2024, 2025, 2026
Kawasan Perindustrian SB Jaya Gombak Risk spot 2024, 2025, 2026
Kawasan Perindustrian Sungai Bakau Gombak Risk spot 2024, 2025

Read the lists with two cautions. Most entries are villages, roads and housing areas, so an industrial estate that is not named can still sit on the same low ground as a listed village next door. And a listed place may have had drainage works since, so check the JPS Selangor flood mitigation project dashboard and our report on the Selangor Budget 2027 flood works. For the status of each Klang district project in Kapar, Meru and Bukit Raja, our partner site has a separate Klang flood checks guide.

Tidal flooding near Port Klang

Coastal units face the sea as well as the rain. Before the high tides of 7 to 11 November 2026, the Klang District Disaster Management Committee said readings of 5.0 to 5.3 metres at the Port Klang station are in the warning category and 5.4 to 5.5 metres in the danger category, and forecast up to 5.2 metres, based on MetMalaysia and National Hydrographic Centre data (Harian Metro). For units in Pulau Indah, Telok Gong, Pandamaran and Kapar, ask what happened when heavy rain fell during a high tide, because that is when drains cannot empty.

How do you check a factory's flood history?

Combine the JPS records with written answers from the owner, then confirm both on site.

  1. Open the InfoBanjir JPS Selangor map, switch on the Hotspot Banjir and Risiko Banjir layers and go through each year. Note any point within walking distance of the unit and the drain or river it sits on.
  2. Find the nearest water level station on Public InfoBanjir. Stations show Normal, Alert (Waspada), Warning (Amaran) or Danger (Bahaya), and rainfall stations run from light (1 to 10 mm) to very heavy (more than 60 mm). Watch the station during the next heavy storm, then drive past the unit while it is still raining.
  3. Ask JPS for mapped data. JPS takes hydrological and geospatial data requests online through sprhin.water.gov.my and spdg.water.gov.my, and its geospatial data list includes Flood Hazard Maps, Flood Maps and Flood Prone Area layers (JPS Annual Report 2023). Whether a private applicant can get a layer, and the fee, is for JPS to decide, so call the JPS district office first.
  4. Ask the owner in writing. Did the unit take in water in December 2021 or since? How deep, for how long, what was damaged, and was a flood claim made? Ask to see the current fire policy schedule and whether flood is on it. Have your lawyer put the answers into the offer letter, the sale and purchase agreement or the tenancy, so a wrong answer has consequences.
  5. Ask the neighbours and the estate guardhouse, then look for water lines on walls and roller shutters, stains at the bottom of panel boards and racking, rust on the lower part of steel columns, and fresh paint that stops at one height.
  6. Ask an insurer for a flood quote for the exact address before you sign (see the insurance section below).

Steps 1, 2 and 5 take a day. JPS data and an insurer's quote take longer, so start them the day a unit makes your shortlist.

Inspector checking an old water stain line on a factory wall and electrical panel
IllustrationInspector checking an old water stain line on a factory wall and electrical panel

How high should the factory floor be above the road?

There is no single centimetre figure in the rules, because the standard is the flood level, not the road. The national drainage manual, MSMA 2nd Edition (2012), says the habitable floor levels of buildings (platform levels) shall be set above the 100 year ARI flood level based on the most recent data, and that occupied floors must at a minimum be above that level. For industry, the minor drainage system is designed for a 10 year ARI storm and the major system for a 100 year ARI storm. The manual explains that a 100 year ARI storm can occur in any year with a probability of 1 in 100. The road is a quick proxy because in a heavy storm the road and the drains carry the water first.

What decides it for one unit:

  • The approved platform level. Councils ask for it at planning stage. MBSJ's planning permission checklist, in force from 1 April 2026, requires a proposed site level plan with the spot levels and platform level of the site and the existing levels of the area within 100 metres (MBSJ checklist). Ask the owner for the approved plans.
  • The flood level JPS holds for the nearest river or drain, which a drainage engineer can compare with the platform level.
  • The building's age. MSMA 2nd Edition dates from 2012, so a factory approved before then was designed to the rules of its time. Compare it with today's standard instead of assuming it meets it.

If there are no plans, a licensed land surveyor can take the levels of the floor, the road crown, the drain top and any water mark on one datum, so you compare like with like.

Point to check What to compare Red flag
Factory floor Height above the road crown in front and the top of the main drain Floor at or below road level, or a road resurfaced higher than the gate
Loading bay and dock Dock pit and ramp against the drain level A sunken dock or a ramp that slopes down into the building
Switchroom and TNB substation Floor level of the room and its cable trench Main switchboard or substation at the lowest point of the lot
Office and server room Ground floor or upper floor Servers, records and controls on the ground floor
Yard Which way it falls after rain Water ponding against the walls or the roller shutters

How do you check the drains around a factory?

Follow the water from the roof to the river and look for the narrowest point.

  • Roof: gutters and downpipes clear and large enough for the roof. A blocked internal box gutter overflows inside the factory, even without a flood.
  • Compound drain and the culvert at the gate: free of silt and rubbish, with covers you can lift.
  • The estate's main drain: compare its top with your floor level and note where it discharges: a river, a pond, a pump house or a tidal gate. Sites that drain through a gate or pump house depend on it working during heavy rain and high tide; JPS's 2026 risk list for Klang includes Kampung Bukit Kuda with its Pintu Air Bukit Kuda floodgate.
  • During heavy rain: visit when Public InfoBanjir shows heavy rain (31 to 60 mm) nearby, or straight after, to see whether the drains keep up.
  • Planned works: ask the council's engineering department and the JPS district office whether a drain upgrade or detention pond is planned, and check the JPS Selangor project dashboard. Blocked public drains can be reported through the JPS Selangor complaint system linked from its website.

In a rented unit, who clears a blocked compound drain or roof gutter is a tenancy question, covered in our separate guide on factory repair responsibility between landlord and tenant.

Is a factory near a river at higher flood risk?

Height above the river's flood level matters more than distance, but a lot beside a river brings extra checks: the river reserve, bank erosion, and water backing up the drains when the river is high.

JPS Selangor sets the river reserve it requires for a lot next to a river by the width of the river (JPS Selangor FAQ):

River width Reserve on each bank
More than 40 m 50 m
20 to 40 m 40 m
10 to 20 m 20 m
5 to 10 m 10 m
Less than 5 m 5 m

JPS's river reserve guideline describes the reserve as a strip of land on both banks gazetted under section 62 of the National Land Code, with the width measured at the narrowest part of each section (JPS guideline). On site and on the title plan, check that no wall, shed, yard or septic tank of the unit sits in the reserve. For coastal land, JPS Selangor's FAQ sets a buffer of 60 metres from the highest water level on sandy coasts and 400 metres on mangrove coasts.

Factories set back behind an open river reserve along a wide river
IllustrationFactories set back behind an open river reserve along a wide river

Does insurance pay after a factory flood?

Only if the policy carried the flood extension when the flood happened. The chief executive of PIAM, the General Insurance Association of Malaysia, said many people still assume a fire policy automatically covers floods, while most standard policies exclude natural disasters unless they are specifically extended; extensions under fire policies cover floods, storms, landslides and other natural events (The Star). He put flood take-up under fire policies at 28.9% nationally, and said the December 2021 floods caused economic losses of RM5.3 billion to RM6.5 billion, of which insurers covered only 20% to 30%.

What that means for each party:

  • Buyer: you will insure the building yourself from completion, so get the quote before you sign the SPA, not after.
  • Tenant: the landlord's policy is written for the landlord's building. Your stock, machines, renovation and lost profit need your own policy with the flood extension, and the tenancy should say who insures what.
  • Lost income: business interruption cover, which pays for lost profit and running costs while you recover, normally responds only when the property damage itself is covered. Our factory flood insurance guide explains the indemnity period and the claim steps.

Ask the insurer, in writing: will you cover flood at this address, what is the flood excess, what sum insured do you suggest for stock and machinery, does the business interruption section include flood, and do you require any risk improvement such as raising stock off the floor.

Is a factory with flood history worth buying?

Sometimes yes. Decide on four tests, and walk away if any one fails for your operation.

  1. How often and how deep. A single shallow flood in December 2021 is a different asset from a unit next to a point that JPS lists year after year. Get dates and depths in writing.
  2. Can the building be adapted? Raising racking, moving the main switchboard and controls higher, sealing cable entries and keeping heavy machines away from the lowest bay all cost money. Get contractor quotes before you price the unit.
  3. Will an insurer cover it? A written flood quote with an excess you can carry turns an unknown into a cost. If no insurer will quote, the whole risk sits with you.
  4. Does the price reflect it? Compare the asking price with registered deals in the same estate on our industrial transactions pages (registered sale prices per square foot are per square foot of land), ask the bank's panel valuer early whether flood history affects the valuation, and check whether the works planned for the area are funded and when they finish.
Signals to proceed Signals to walk away
Floor and switchroom above past water marks Water reached the switchboard or machine foundations
One event, with the cause since fixed (a drain or pond completed) Repeated entries for the same spot in JPS lists
Written flood quote from an insurer No insurer will quote flood for the address
Price set against registered deals with the risk in mind Seller denies a flood that neighbours and water marks confirm

A tenant uses the same four tests, plus two tenancy points: who pays to repair flood damage to the building, and whether rent stops while the factory cannot be used. Flood risk is one of several site checks; our factory site selection checklist covers power, zoning, workers and access, and separate guides cover inspecting a used factory building and due diligence on industrial land.

Practical steps: more questions

Should I avoid every factory that has flooded once?

No. A unit that flooded once in December 2021, whose floor and switchroom sit above the water marks and whose drain problem has since been fixed, can be a sound choice at the right price. Avoid units that flood repeatedly, where water reached the main switchboard, or where no insurer will offer flood cover.

Frequently Asked Questions

How do you inspect a factory's drainage system?

Follow the water from the roof to the river and look for the narrowest point. Check that gutters and downpipes are clear and big enough, that the compound drain and the culvert at the gate are free of silt with covers you can lift, and where the estate's main drain discharges: a river, pond, pump house or tidal gate. Compare the drain top with your floor level, visit during or right after heavy rain, and ask the council and the JPS district office about planned drain works.

How do I check if an area is flood prone in Malaysia?

In Selangor, open the InfoBanjir JPS Selangor map and switch on the Hotspot Banjir and Risiko Banjir layers for recent years, then find the nearest river station on Public InfoBanjir. Ask the JPS district office whether the lot falls in a mapped flood-prone area, and ask the owner and neighbours about past floods in writing. No single source settles it for one lot, so combine them.

How do I know if there is flooding in my area right now?

Public InfoBanjir shows live water levels at JPS stations as Normal, Alert, Warning or Danger, and rainfall from light to very heavy. The InfoBanjir JPS Selangor portal adds sirens, cameras and flood gauges for Selangor districts. Watching the nearest station during a storm also tells you how quickly the river near a shortlisted factory rises.

Which areas in Selangor are most prone to flooding?

JPS Selangor's 2024 to 2026 lists include points in every district. In the 2026 risk spot list Klang has 38 entries, Hulu Langat 37 and Sepang 34, and in the 2026 hotspot list Klang has 14 and Petaling 11. Industrial areas named include Kawasan Perindustrian Sg. Rasau in Klang, Taman Perindustrian Baru 22 in Ijok and Kawasan Perindustrian SB Jaya in Gombak, and places beside industrial land in Meru, Bukit Raja, Telok Gong, Pulau Indah and Shah Alam. Check the exact lot rather than judging a whole town.

What zone has the highest flood risk in Malaysia?

Malaysia does not publish US-style flood insurance zones. JPS mapping works with flood hazard maps, flood maps and flood-prone areas, and the drainage manual MSMA uses the 100 year ARI flood level as the line that building floors must clear. Land in a mapped flood-prone area, low land beside a river and coastal land exposed to high tides are the highest-risk cases to check.

How high above the road should a factory floor be?

The rules do not set a figure above the road. MSMA 2nd Edition requires floor levels above the 100 year ARI flood level, so the question to ask is how the approved platform level compares with that flood level. On site, a floor at or below the road crown or the top of the main drain is a warning sign worth a surveyor's check.

Does the landlord's insurance cover my stock if a rented factory floods?

Normally no. The landlord insures the building for the landlord's interest; your stock, machinery, renovation and lost income need your own policy with the flood extension. Check the tenancy for who insures what before you move in.

Can I insure a factory that has flooded before?

It depends on the insurer, who decides whether to offer flood cover for the address and at what premium and excess. Ask for a written quote before you sign, and ask what risk improvements would change the terms. If no insurer will quote, price the risk as uninsured.

FactoryHub is dedicated to helping every client find the right factory or warehouse. To check a shortlisted unit's flood records, levels and drains before you rent or buy, call Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.