Key Takeaways
- "Free trade zone" is the old name. Malaysia's Free Zones Act 1990 recognises two kinds of zone: free industrial zones (FIZ) for export manufacturing and free commercial zones (FCZ) for trading and logistics. Zones declared under the old Free Trade Zones Act 1971 are deemed FIZs.
- 48 zones nationwide. The Ministry of Investment, Trade and Industry (MITI) told the Dewan Negara in August 2026 that 48 free zones are regulated under the Act: 27 FCZ and 21 FIZ (Bernama). Selangor's FIZs are the Port Klang Free Zone (PKFZ), Telok Panglima Garang, Sungai Way and Ulu Klang.
- Duty free inside, dutiable when it leaves. Goods brought into, produced or manufactured in a free zone pay no customs duty, excise duty or sales tax, but goods moved into the rest of Malaysia are treated as imports. Forklifts, cranes, building materials, air conditioning and office furniture stay dutiable even inside the fence.
- Export test for manufacturers. MIDA normally places a manufacturer in an FIZ when all, or at least 80%, of its output is exported and its raw materials are mainly imported. An FIZ company may apply to sell up to 40% of production in Malaysia.
- Two layers of approval. A factory or warehouse in a zone needs the zone authority's operating approval (a ZB6 code, renewed yearly) on top of the usual council, Bomba, DOE and MIDA approvals. Outside a zone, a Licensed Manufacturing Warehouse (LMW) gives similar duty treatment at your own premises.
People search "free trade zone Malaysia" when they want to import materials without paying duty, run a regional distribution centre, or rent a factory inside a zone such as PKFZ or Telok Panglima Garang. This guide explains what the law actually says, where the zones are, what stays dutiable, and what a factory owner or tenant should check. It explains the rules in general terms and is not legal, customs or tax advice.
What is a free trade zone in Malaysia?
Under section 3 of the Free Zones Act 1990, the Minister of Finance may declare any area of Malaysia a free commercial zone or a free industrial zone by notification in the Gazette, and the notification defines the zone's limits. The Minister then appoints an authority to administer, maintain and operate each zone. It can be a federal or state statutory body, a government department or a company.
The Royal Malaysian Customs Department treats a free zone as a place outside the principal customs area under section 2(1A) of the Customs Act 1967 (Customs). In practice, a free zone is a fenced area with controlled gates where goods can be stored, handled or manufactured without paying import duty first.
"Free trade zone" is the term most people still type, but it comes from an earlier law. Section 50 of the 1990 Act says any free trade zone declared under the Free Trade Zones Act 1971 is deemed a free industrial zone. That is why older names such as the Sungei Way Free Trade Zone are still heard for what is legally an FIZ today.
Free industrial zone vs free commercial zone
| Free industrial zone (FIZ) | Free commercial zone (FCZ) | |
|---|---|---|
| What it is for | Manufacturing activities listed in the Second Schedule of the Act | Trading (excluding retail), breaking bulk, grading, repacking and relabelling |
| Typical occupier | Export manufacturer | Distributor, freight and logistics operator, regional distribution centre |
| Where finished goods go | Export, or to an FCZ with the authority's approval after consulting Customs (section 8) | Re-export, or into Malaysia as an import |
| Trading | Not allowed in an FIZ, subject to section 8 (MOF) | The main activity |
| Retail | Not allowed | Only where the Minister authorises it (section 6A) |
The Free Zones (Amendment) Act 2019 removed "transit" from the legal definition of commercial activity, so older guides that list transit as an FCZ activity are out of date.
How many free trade zones are there, and which are in Selangor?
MITI's August 2026 answer to the Dewan Negara counts 48 free zones: 27 free commercial zones and 21 free industrial zones. The Customs list of free zones and zone authorities currently names 24 commercial and 21 industrial entries, some of them phases of the same estate, so treat MITI's figure as the newer count and confirm a specific zone with its authority.
These are the zones in Selangor and the Klang Valley on the Customs list:
| Zone | Type | Zone authority on the Customs list |
|---|---|---|
| Port Klang Free Zone (PKFZ), Pulau Indah | FIZ and FCZ | Port Klang Free Zone Sdn Bhd |
| Telok Panglima Garang, Kuala Langat | FIZ | Majlis Daerah Kuala Langat |
| Sungai Way, Petaling Jaya | FIZ | Majlis Bandaraya Petaling Jaya |
| Ulu Klang | FIZ | Majlis Perbandaran Ampang Jaya |
| Northport (Pelabuhan Utara) | FCZ | Port Klang Authority |
| Westport (Pelabuhan Barat) | FCZ | Port Klang Authority |
| Southport (Pelabuhan Selatan) | FCZ | Port Klang Authority |
| MILS Logistics Hub, Klang | FCZ | Meriah Selalu Sdn Bhd |
| KLIA, Sepang | FCZ | Malaysia Airports Holdings Berhad |
PKFZ describes itself as an integrated 1,000-acre free commercial and industrial zone next to Port Klang (PKFZ). The Sungai Way Free Industrial Zone in SS 8 is one of the oldest export manufacturing areas in Petaling Jaya, and the Telok Panglima Garang industrial area and FIZ on Jalan Klang Banting is one of the closest industrial areas to Westports and Northport. For how PKFZ compares with the port-side areas, see our Westport, Northport and PKFZ comparison, and Ms Teh's page on renting space in the Port Klang Free Zone.
Outside Selangor, the FIZs on the Customs list are in Johor (Pasir Gudang, Tanjung Pelepas, Tanjung Bin and the Senai airport zones), Melaka (Batu Berendam and Tanjung Kling), Penang (Bayan Lepas and Seberang Perai), Perak (Jelapang and Kinta) and Sarawak (Sama Jaya). Commercial zones also sit at ports, airports and border towns such as Stulang Laut, Bukit Kayu Hitam, Rantau Panjang, Pengkalan Kubor, Kuantan Port and Tasik Kenyir.
The zones matter for trade: MITI said exports recorded in FIZs rose from RM153.5 billion in 2021 to RM188.3 billion in 2025, and reached RM106.7 billion from January to June 2026.
How does a free zone work for duty and tax?
Four sections of the Act do most of the work:
- Section 4: goods brought into, produced or manufactured in a free zone are not charged customs duty or excise duty. Customs adds that sales tax is also exempted for these goods.
- Section 7: goods taken from the rest of Malaysia into a free zone are deemed exported, and goods taken out of a free zone into the rest of Malaysia are deemed imported, with any customs duty payable.
- Section 8: goods manufactured in an FIZ may leave only for export, or for an FCZ with the authority's approval after consulting Customs. Using them inside the zone needs written permission from a Customs officer of at least Assistant Director rank.
- Section 10: only the activities in the First Schedule (FCZ) and Second Schedule (FIZ) may be carried out, with the Minister's approval.
MIDA adds that since 1 January 2011, FIZ and LMW companies are eligible for import duty exemptions equivalent to ASEAN (ATIGA) rates if they reach 40% local content (MIDA).
Which customs forms are used?
| Movement of goods | Form (Customs) |
|---|---|
| Overseas into the free zone | ZB No. 1 |
| Free zone to overseas | ZB No. 1 |
| Rest of Malaysia into the free zone | Customs No. 2 |
| Free zone into the rest of Malaysia | Customs No. 1 |
| Free zone to another free zone by land | Customs No. 8 |
What is not duty free inside a free zone?
The Free Zones (Exemption of Goods) Order 1998 takes several kinds of goods out of the section 4 exemption, so they pay customs and excise duty even inside the fence (Customs). The list matters for anyone budgeting a fit-out:
- forklifts and cranes
- construction and building materials
- office equipment and furniture
- fire fighting and pollution control equipment
- motor vehicles and spare parts, and tyres
- petroleum and petroleum products
- explosives and chemicals
- air conditioning equipment
- manufacturing aids
- any goods and services not used directly in the approved activity
Who can set up in a free industrial zone, and can it sell in Malaysia?
MIDA says a company can be located in an FIZ when its entire production, or not less than 80% of it, is meant for export and its raw materials and components are mainly imported, although the government encourages FIZ companies to use local materials (MIDA).
Selling in Malaysia is possible but controlled. Through MIDA's InvestMalaysia portal, a company in an FIZ or with LMW status may apply to sell up to 40% of its production in the domestic market, subject to criteria. Whatever crosses into the rest of Malaysia is an import under section 7, with duty and tax payable.
A manufacturing licence under the Industrial Co-ordination Act 1975 is a separate question: it is needed when the company has shareholders' funds of RM2.5 million or more, or 75 or more full-time employees, whether or not it sits in a zone.
How do you set up a factory or warehouse in a free zone?
The order below follows the Act, the PKFZ business setup page and a law firm's summary of the zone authority process:
- Incorporate in Malaysia. A company must be incorporated under the Companies Act 2016 before it applies to operate in a free zone (RDS Law Partners).
- Pick the zone and speak to its authority. Under section 14, the authority may permit buildings and may lease land and buildings in the zone on its own terms, and under section 15 no one may enter or live in a zone without its permission.
- Location and manufacturing licence. PKFZ says manufacturing projects need a state no-objection letter for the location (for PKFZ, from Invest Selangor), which then goes to MIDA for the manufacturing licence.
- Council and agency approvals. Planning permission, building plans and the certificate of fitness go through the council's One Stop Centre, plus business licences for the premises, signboard, storage and canteen. PKFZ's page still names the Municipal Council of Klang, which is now the Klang Royal City Council (MBDK). DOE approvals, DOSH approval of certified machinery such as cranes and boilers, and Bomba certification also apply.
- Register with the zone authority. The company applies on Form ZB4 or ZB5, and the authority issues a ZB6 approval with a warehouse or manufacturing code, valid for one year and renewed every year.
- Run it by the book. Every movement is declared, and section 10A requires records to be kept for seven years, with a fine of up to RM50,000, up to three years' jail or both for a breach. Under section 8B, stock that is short and cannot be explained is presumed to have been taken into Malaysia, and the duty can be demanded within six years.
Foreign owners setting up for the first time can read our guide for foreign companies buying or renting a factory for the company, licence and property steps outside the zone rules.
Free zone, LMW or bonded warehouse: which one fits your factory?
| Free industrial zone | Licensed Manufacturing Warehouse (LMW) | Licensed (bonded) warehouse | |
|---|---|---|---|
| What it is | A gazetted, fenced area | A Customs licence for your own factory | A Customs licence under section 65 of the Customs Act 1967 |
| Activity | Export manufacturing | Export manufacturing | Storing dutiable goods |
| Location | Only inside the zone | Where an FIZ is not practical | Approved premises |
| Duty | Not charged inside the zone | Facilities similar to an FIZ | Deferred until goods are released locally or re-exported |
MIDA describes the LMW as the way to enjoy FIZ facilities where it is neither practical nor desirable to set up an FIZ, normally for companies exporting all or at least 80% of output. Customs describes a licensed warehouse as storage for dutiable goods, with duty and tax deferred until the goods are released for local use or re-exported (Customs).
In practice, the choice often comes down to the building. If the factory that suits your power, height and floor loading sits outside a zone, an LMW lets you keep the duty treatment without moving into the fence.
Renting or buying a factory in a free zone: what should you check?
- Is the unit inside the gazetted limits? A zone covers only the area defined in its notification. In Telok Panglima Garang, the free zone is one part of a much larger industrial area, so an address in TPG does not make a factory a free zone factory.
- Who grants the right to occupy? Inside a zone, the authority leases or permits buildings and property under section 14, so ask whether your landlord's tenancy has the authority's consent and whether your own ZB6 approval can be issued before you sign.
- Does your activity fit the zone? An FIZ is for manufacturing, not trading; a distribution business belongs in an FCZ such as PKFZ, Westport or Northport.
- Budget for dutiable fit-out goods. Forklifts, cranes, building materials, air conditioning and office furniture are outside the exemption.
- Check registered prices for the wider area. JPPH-registered transactions for Telok Panglima Garang and Jenjarom over 24 months to August 2026 show semi-detached factories at a median RM6.68 million (RM308 psf of land), detached factories at a median RM8.6 million (RM238 psf of land) and a median factory rent of RM1.45 psf a month (TPG and Jenjarom transaction prices and rents). For Pulau Indah, Westport and PIIP, registered industrial land sold at RM79 psf of land and factories rented at a median RM1.54 psf a month. These figures cover each whole area, not only the units inside a zone.
Frequently Asked Questions
What is a free trade zone in Malaysia?
It is an area declared by the Minister of Finance under the Free Zones Act 1990 where goods can be brought in, handled or manufactured without customs duty, excise duty or sales tax. Legally it is either a free industrial zone for export manufacturing or a free commercial zone for trading and logistics. Zones declared under the older Free Trade Zones Act 1971 are now treated as free industrial zones.
How many free trade zones are there in Malaysia?
MITI told the Dewan Negara in August 2026 that there are 48 free zones regulated under the Free Zones Act 1990: 27 free commercial zones and 21 free industrial zones. The Customs list shows some zones in several phases, so the count of entries can differ. Selangor has PKFZ, Telok Panglima Garang, Sungai Way and Ulu Klang as industrial zones.
What is the difference between a free industrial zone and a free commercial zone?
A free industrial zone is for manufacturing, mainly for export, and its finished goods may leave only for export or, with approval, for a free commercial zone. A free commercial zone is for trading, breaking bulk, grading, repacking and relabelling, and does not allow retail unless the Minister authorises it. Trading is not allowed inside a free industrial zone.
How does a free zone work?
Customs treats the zone as outside the principal customs area, so goods entering it from abroad pay no duty while they stay inside. Goods moving from the zone into the rest of Malaysia are deemed imports and pay duty, and goods coming in from the rest of Malaysia are deemed exports. Every movement is declared on Customs or ZB forms and records must be kept for seven years.
Is the Port Klang Free Zone a free industrial zone or a free commercial zone?
Both. PKFZ on Pulau Indah describes itself as an integrated 1,000-acre free commercial and industrial zone, and the Customs list names it under both types with Port Klang Free Zone Sdn Bhd as the zone authority. A manufacturer and a distributor can therefore both operate there under different approvals.
Can a company in a free industrial zone sell its products in Malaysia?
Yes, within limits. A company in an FIZ or with LMW status may apply through MIDA to sell up to 40% of its production in the domestic market, subject to criteria. Goods sold into Malaysia are treated as imports and pay the duty and tax due.
Is a free trade zone the same as a free trade agreement?
No. A free trade zone is a physical place in Malaysia governed by the Free Zones Act 1990, while a free trade agreement is a treaty between countries that lowers tariffs on goods traded between them. The two can work together: MIDA says FIZ and LMW companies are eligible for import duty treatment equivalent to ASEAN (ATIGA) rates when they reach 40% local content.
FactoryHub is dedicated to helping every client find the right factory or warehouse, inside a free zone or beside one. For factories and warehouses in PKFZ, Pulau Indah, Telok Panglima Garang and the rest of Selangor, call Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.
