Key Takeaways

  • On a square 1-acre lot (43,560 sq ft), the setbacks alone cap a single-storey factory at about 22,800 sq ft of footprint, about 52% of the land. Selangor's planning manual allows a plinth area (site coverage) of up to 60% for detached and semi-detached industry, with 40 ft setbacks facing the road and 25 ft at the sides and rear. On one acre the setbacks bite before the 60% cap does.
  • If 40 ft container trailers must load and turn inside your gate, the same square acre carries only about 10,300 sq ft of building. PLANMalaysia's parking guideline gives a trailer a 4 m x 18 m bay plus 18.3 m to manoeuvre: 36.3 m, about 119 ft, of clear depth in front of the loading door.
  • On 2 acres the 60% cap decides: up to 52,272 sq ft on one floor, or about 37,000 sq ft on a square lot with a full trailer yard in front. On 5 acres the cap is 130,680 sq ft, and a trailer yard fits without cutting into it.
  • Ten 40 ft trailers need about 15,600 sq ft (0.36 acre) of paved bays and manoeuvring space in one row, before the gate, the driveway, the setbacks and any building.
  • Plot ratio rarely limits a single-storey factory. Setbacks, parking, lorry bays and the trailer yard do. Your lot's real figures come from the council's local plan and Selangor's 2025 planning guidelines, so use these worked examples as a first test, not as an approval.

Buyers, owners and tenants of industrial land in Klang, Shah Alam and the rest of Selangor all start with the same question: how big a factory or warehouse will this land actually carry? The answer is never simply "60% of the land". Setbacks, car and lorry parking, the yard a 40 ft trailer needs, open space and the TNB substation all take their share before the building gets what is left.

This guide works through 1, 2 and 5 acres with the published Selangor and PLANMalaysia standards, so you can test a lot before you pay a deposit or brief an architect. For what plot ratio and plinth area mean, read our plot ratio guide. This guide is about the numbers.

Which rulebook these figures come from. The standards below are from the fourth edition (2022) of the Manual Garis Panduan dan Piawaian Perancangan Negeri Selangor, the latest edition we could read in full. According to PLANMalaysia@Selangor, the State Executive Council approved the Garis Panduan dan Piawaian Perancangan Negeri Selangor 2025 on 7 November 2025 and confirmed it on 12 November 2025. It comes in six volumes, one of them for industry, and is sold in print at RM300 a copy. Ask your architect or town planner to confirm the current figure for every rule before you rely on it.

How big a factory can you build on 1 acre of industrial land?

Short answer: on a square, single-frontage acre, about 22,800 sq ft of single-storey footprint is the ceiling the setbacks allow. That is a ceiling, not a design. If container trailers must load inside the lot, plan for about 10,000 to 15,000 sq ft, depending mostly on how deep the lot runs from the road.

The rules that set the ceiling

Rule (Selangor manual, 4th edition 2022) Detached or semi-detached industry
Minimum lot 0.5 acre (0.203 ha) for small detached, 1 acre (0.405 ha) for medium to large detached, 60 ft x 132 ft for semi-detached
Maximum plinth area 60% of the lot
Setback facing a road (front, and the side of a corner lot) 40 ft (12.192 m)
Side and rear setback 25 ft (7.620 m)
Office content Up to 30% of gross floor area is treated as office
Open space and recreation At least 5% of the site

Plot ratio is not set in that table. It comes from the council's local plan. Subang Jaya's local plan, for example, sets 1:3 and 60% plinth for detached factories (minimum lot 1 acre) and 1:2, 60% and three storeys for semi-detached factories. Klang (MBDK), Shah Alam (MBSA) and Kuala Langat (MPKL) set their own figures, so ask the council's planning department for the figure that applies to your lot.

Worked example: a square 1-acre lot

These are illustrations of the arithmetic, not a real lot. One acre is 43,560 sq ft, a square about 208.7 ft on each side, with one road frontage.

  1. The 60% plinth cap: 43,560 x 60% = 26,136 sq ft.
  2. Inside the setbacks: the width loses 25 ft on each side (158.7 ft left) and the depth loses 40 ft at the front and 25 ft at the rear (143.7 ft left). 158.7 x 143.7 = about 22,800 sq ft.
  3. The smaller figure wins: about 22,800 sq ft, or 52% of the land.
  4. On a corner lot the second road side also needs 40 ft, and the envelope falls to about 20,650 sq ft.
  5. With a trailer yard inside the gate: a 40 ft trailer at a loading door needs 36.3 m (about 119 ft) of clear depth in front of it. Take 119 ft from the front and 25 ft from the rear, and the building is only about 64.6 ft deep: about 10,300 sq ft.

Shape changes the result more than most buyers expect. A lot of the same acre that is 150 ft wide and 290 ft deep gives about 22,500 sq ft inside the setbacks, but about 14,600 sq ft with the trailer yard in front, because it has more depth to spare. When trailers must load inside the lot, the depth from the road matters more than the acreage.

What the rest of the land must still hold

Take the 22,800 sq ft single-storey ceiling and assume, only for the sum, that 10% of it is office. The Selangor manual then asks for:

  • Car bays: 1 per 1,000 sq ft of production floor (21), 1 per 500 sq ft of office (5), plus visitor bays of 10% or at least 2: 28 bays.
  • Motorcycle bays: 1 per 2,000 sq ft of floor or 1 per worker: 12 at the floor-area rate.
  • Lorry bays: 1 per 10,000 sq ft or at least 2, whichever is higher: 2.28, so 3 bays.
  • Canteen: 2% of the factory floor, about 456 sq ft, inside the building.
  • Open space: 5% of the site, 2,178 sq ft.

PLANMalaysia's parking guideline (GP011-A, 2018) sizes an off-street right-angle car bay at 2.5 m x 4.8 m with a 7.5 m two-way aisle. Two rows sharing one aisle work out at about 230 sq ft per car, so 28 cars need roughly 6,400 sq ft. On this acre only about 20,750 sq ft lies outside the building, all of it in strips 40 ft and 25 ft wide. That is why the setback envelope is a ceiling: the car park, lorry bays, guard house and substation usually push the real building below it.

Can you build up instead?

Two storeys on the 22,800 sq ft footprint give about 45,600 sq ft of floor, a plot ratio of about 1.05, well inside the 1:3 in Subang Jaya's plan. But every rule above is counted on floor area, so the same factory would need about 54 car bays and 5 lorry bays. On one acre the yard runs out before the plot ratio does.

Adding a floor or a large mezzanine later is development under the Town and Country Planning Act 1976 (Act 172) and needs planning permission. On land in the category "industry", section 117 of the National Land Code also implies a condition that no building is demolished, altered or extended without the prior written consent of the appropriate authority.

How much warehouse can you build on 2 acres?

Short answer: up to 52,272 sq ft on one floor, which is the 60% cap on 87,120 sq ft of land. On a square lot with a full trailer yard in front, about 37,000 sq ft.

On a square 2-acre lot (about 295.2 ft each side) the setbacks leave about 56,400 sq ft, more than the cap, so here the 60% rule decides. Warehouse parking is lighter than factory parking: 1 car bay per 2,500 sq ft of storage floor. For 52,272 sq ft with 5% office, the sum is 20 storage bays, 6 office bays and at least 2 visitor bays: 28 car bays, plus 6 lorry bays (5.2 rounded up), a canteen of 0.5% of the warehouse floor (about 261 sq ft) and 4,356 sq ft of open space.

A trailer yard 36.3 m deep across the front costs this lot about 15,000 sq ft of building, but it buys a lot of loading room. The 245 ft between the side setbacks is wide enough for about 18 trailer bays of 4 m side by side, far more than the 4 lorry bays a 37,000 sq ft warehouse needs. The design work is fitting the gate, the guard house, the car park and the substation without blocking that yard. For gate widths, turning circles and dock heights, see our container truck access guide.

What can you build on 5 acres, and what does 5 acres suit?

Short answer: 217,800 sq ft of land allows up to 130,680 sq ft on one floor at 60% coverage. The setbacks (about 167,400 sq ft on a square lot) and even a full trailer yard in front (about 134,400 sq ft) leave the 60% cap as the limit. At that size the rules ask for at least 14 lorry bays, about 66 car bays for a warehouse with 5% office or about 148 for a factory with 10% office, and 10,890 sq ft of open space.

What 5 acres suits

  • One large warehouse or distribution centre. In JPPH-registered transactions for Klang and Port Klang over the 24 months to August 2026, the 8 recorded warehouse sales had a median land area of 155,145 sq ft (about 3.6 acres), a median price of RM16.58 million and RM129 psf of land. A 5-acre lot is larger than that median.
  • A factory with a large open yard, for steel stock, precast, machinery or container handling, where the yard earns as much as the roof.
  • Subdivision into smaller lots. The 2022 manual's minimum lots are 1 acre for medium to large detached, 0.5 acre for small detached and 60 ft x 132 ft for semi-detached industry, and new service roads are 66 ft wide. Subdivision needs the land office's approval under section 135 of the National Land Code and planning permission under Act 172, which counts subdivision as development. The manual asks industrial developments of more than 10 acres or more than 50 units to include 30% low-cost terrace industry; a 5-acre lot split into a few lots is below both.
  • Worker housing. The 2022 manual calls for worker accommodation where an industrial area exceeds 20 acres or employs more than 300 workers, and caps it at 15% of the industrial area.

1, 2 and 5 acres side by side

Worked example (square lot, one road frontage) 1 acre 2 acres 5 acres
Land 43,560 sq ft 87,120 sq ft 217,800 sq ft
Side of the square 208.7 ft 295.2 ft 466.7 ft
60% plinth cap 26,136 sq ft 52,272 sq ft 130,680 sq ft
Inside 40, 25 and 25 ft setbacks about 22,800 sq ft about 56,400 sq ft about 167,400 sq ft
Single-storey ceiling (smaller of the two) about 22,800 sq ft 52,272 sq ft 130,680 sq ft
With a 36.3 m trailer yard in front about 10,300 sq ft about 37,000 sq ft 130,680 sq ft
Lorry bays at the ceiling 3 6 14
Car bays at the ceiling, warehouse with 5% office 14 28 66
Car bays at the ceiling, factory with 10% office 28 61 148
Open space at 5% 2,178 sq ft 4,356 sq ft 10,890 sq ft
Total floor at a 1:3 plot ratio 130,680 sq ft 261,360 sq ft 653,400 sq ft

The last row shows why plot ratio is rarely the limit on a single-storey building: at 1:3, even the 5-acre lot could carry five times its single-storey ceiling in floor area, if parking and access could keep up.

Single storey warehouse with a deep trailer yard, loading doors and a side car park
IllustrationSingle storey warehouse with a deep trailer yard, loading doors and a side car park

How much land do you need to park ten 40 ft container trucks?

Short answer: about 15,600 sq ft (0.36 acre) of paved bays and manoeuvring space for ten trailers in one row, or about 11,700 sq ft (0.27 acre) if two rows of five face one shared manoeuvring aisle. The gate, driveway, guard house and setbacks come on top.

The PLANMalaysia guideline sets these minimums for heavy vehicle parking, which it defines as vehicles over 5,000 kg laden, with trailers, containers and prime movers counted as 3 to 6 axles:

Item PLANMalaysia GP011-A
Trailer bay 4 m wide x 18 m long
Manoeuvring space 18.3 m
Total length needed 36.3 m
Bay angles 90°, 60° or 45°; 45° recommended for heavy vehicles; 30° not encouraged
Headroom under a roof or canopy 4.5 m on level ground, 4.75 m on a ramp
Lighting At least 100 lux under a roof, 50 lux in the open

The Selangor manual gives a slightly larger trailer bay of 14 ft x 59 ft (4.267 m x 17.983 m) with another 60 ft (18.288 m) for handling, and a goods loading area of at least 30 ft x 26 ft.

Layout for ten 40 ft trailers Size Area
One row, PLANMalaysia sizes 40 m x 36.3 m 1,452 m², about 15,600 sq ft (0.36 acre)
Two rows of five facing one shared aisle 20 m x 54.3 m 1,086 m², about 11,700 sq ft (0.27 acre)
One row, Selangor manual sizes 140 ft x 119 ft 16,660 sq ft (0.38 acre)

Two points decide whether this works on your land. First, ten trucks parked is not ten trucks loading: every loading door needs its own 36.3 m of depth in front of it. Second, parking your own fleet as part of a factory is different from running a haulage depot or container yard as the business itself. Act 172 treats a material change in the use of land as development that needs planning permission, so check the title's express condition and the local plan zoning before you buy land for a yard.

What else takes land on an industrial lot?

  • The TNB substation. Under TNB's Electricity Supply Application Handbook (ESAH 3.1), a single consumer with a maximum demand above 350 kVA and up to 1,000 kVA is supplied at 400 V by underground cable from a new substation, and from 1,000 kVA it is fed at 11 kV or 22 kV through a TNB switching station. ESAH lists a single-chamber distribution substation building at 7.6 m x 5.7 m (about 466 sq ft), a double chamber at 10.6 m x 5.7 m (about 650 sq ft) and a compact substation on a 7.0 m x 4.0 m plot (about 301 sq ft), before setbacks. The owner hands the substation land to TNB by transfer or lease at a nominal RM10. The Selangor manual lists electrical substations among the structures allowed inside the building setback.
  • Open space and planting. At least 5% of the site, and on lots above 1 acre a 10 ft planting strip inside the front setback and 5 ft along common boundaries.
  • Other structures allowed in the setback. Guard house, bin centre, water tank, pump house, cooling tower, covered car park, septic tank or sewage plant, LPG tank and enclosed gas cylinder store. Placing these in the setback keeps them out of the building envelope.
  • Prayer room and canteen. On lots above 1 acre the 2022 manual asks for a 20 ft x 20 ft prayer space with separate 10 ft x 20 ft spaces for men and women, plus a canteen of 2% of the factory floor or 0.5% of the warehouse floor.
  • Buffer zones. If the land is near housing, the 2022 manual sets 50 m for light, 150 m for medium and 300 m for heavy industry, measured from the factory wall to the nearest house wall. That limits what industry may go on the lot more than how big the building can be.

I own 5 acres of industrial land: should I sell or build to let?

Short answer: it depends on four things you can check: the gap between registered land prices and registered prices for built property near you, whether a tenant or end user is lined up before you build, whether you can fund construction and the empty months, and what your title allows. We do not forecast where prices will go, and no route suits every owner.

What the registered deals show

JPPH-registered transactions for Klang and Port Klang, 24 months to August 2026:

Type Recorded deals Median price Price per sq ft of land
Industrial land 143 RM10.15 million RM90 psf of land
Warehouse 8 RM16.58 million RM129 psf of land
Detached factory 69 RM14.9 million RM270 psf of land

Like-for-like industrial land prices (same park, same type) in the latest 12 months were 1% lower than in the 12 before, across 6 parks. Across Selangor and Kuala Lumpur, industrial land recorded a median of RM69 psf of land (603 deals) and warehouses RM170 psf of land (41 deals). Every one of these figures is per sq ft of land, for buildings as well as vacant land.

How to read it for your own lot

  • The gap is what buyers paid for a standing building. The difference between the land rate and the built rate in the same area covers the building, its approvals, its power and the years it took. Ask a quantity surveyor for your build cost per sq ft of floor, multiply it by your site coverage to turn it into a cost per sq ft of land, then add fees, finance and the build period. If that comes close to the gap, building adds little over selling. Our build or buy guide sets out construction cost ranges and the approval stages.
  • Rent data is thin at this size. The registered detached factory tenancies in Klang and Port Klang show a median rent of RM1.22 psf a month, with a median of RM19,700 a month for about 15,090 sq ft (301 tenancies), and registered factory tenancies there typically run 24 months. A 130,000 sq ft building is far larger than that median, so ask for registered tenancies of a similar size before you build a rent forecast.
  • A named tenant changes the risk. Building to suit a tenant who signs first removes most of the vacancy risk; building on speculation keeps it with you.
  • Holding the land idle has conditions. Section 117 of the National Land Code implies, for land in the category "industry", that the industry starts operating within three years of the date the land first came under that category, unless the title's express conditions say otherwise. Read your title before you plan to hold it empty, and remember the yearly quit rent and assessment.
  • Tax on a sale depends on who owns the land and for how long. A company and an individual are taxed differently; take tax advice before choosing.
Small electrical substation, guard house and water tank inside a factory front setback
IllustrationSmall electrical substation, guard house and water tank inside a factory front setback

What to check before you buy, design or price a lot

  1. The title: category of land use, express conditions, freehold or leasehold and the years left, and any restriction in interest.
  2. The local plan: zoning and plot ratio from the council's planning department (MBDK for Klang and Port Klang, MBSA for Shah Alam, MBSJ for Subang Jaya, MPKL for Kuala Langat).
  3. The survey plan: real frontage and depth, corner or intermediate, and any road, drainage or river reserve that cuts the usable area.
  4. A test layout: ask your architect to draw your real trucks, number of loading doors, staff numbers and office share on the lot before you sign.
  5. Power: your maximum demand in kVA and where TNB would want the substation.
  6. Neighbours: housing close by brings a buffer zone and limits the class of industry.
  7. Flood level, soil and fill: see Ms Teh's guide to buying industrial land in Klang to build a factory for the site checks.
  8. The current rulebook: confirm every figure here against the 2025 Selangor guidelines with your town planner.

Current industrial land for sale in Selangor lists land area, tenure and location for each plot. Built-up versus land area, single versus double storey, mezzanine approval and land due diligence are covered in separate FactoryHub guides.

This guide explains planning standards and land rules in general and is not legal, tax or planning advice; the council, a registered town planner or architect and your lawyer decide what applies to your lot.

Practical steps: more questions

Does a TNB substation take part of my land?

Usually yes once your maximum demand passes 350 kVA, because TNB then supplies you from a new substation. ESAH 3.1 lists a single-chamber substation building at 7.6 m x 5.7 m and a compact substation on a 7.0 m x 4.0 m plot, before setbacks. The land is transferred or leased to TNB at a nominal RM10, and Selangor's manual allows the substation inside the building setback.

Frequently Asked Questions

How many lorries can a factory park at the same time?

It depends on the yard, not on a standard number, so count the lorry bays on the approved layout plan and measure the space that is really free. Selangor's planning manual asks detached and semi-detached factories for at least one lorry bay per 10,000 sq ft of floor area, or two, whichever is more, and one bay for every five terrace units. Under PLANMalaysia's guideline a trailer bay is 4 m x 18 m plus 18.3 m to manoeuvre, while Selangor's small lorry bay is about 3 m x 6 m plus 6 m.

How many staff parking spaces does a factory need?

In Selangor the planning manual sets it by floor area, not headcount: 1 car bay per 1,000 sq ft of production floor, 1 per 500 sq ft of office, plus visitor bays of 10% (at least 2). Motorcycle bays are 1 per 2,000 sq ft of floor or 1 per worker, and lorry bays 1 per 10,000 sq ft (at least 2). A 22,800 sq ft factory with 10% office needs about 28 car bays, roughly 6,400 sq ft of land. Confirm the current figures with your council and architect.

How big a factory can I build on 1 acre of industrial land?

On a square 1-acre lot with one road frontage, Selangor's setbacks of 40 ft at the front and 25 ft at the sides and rear leave about 22,800 sq ft for a single-storey building, about 52% of the land. If 40 ft trailers must load inside the gate, the building on that lot falls to about 10,300 sq ft. A deeper lot of the same size keeps more.

How many square feet of warehouse can I build on 2 acres?

Up to 52,272 sq ft on one floor, which is the 60% plinth cap on 87,120 sq ft of land. With a full 36.3 m trailer yard across the front of a square lot, about 37,000 sq ft. At the 52,272 sq ft ceiling the rules ask for at least 6 lorry bays and, with 5% office, about 28 car bays.

What can I do with 5 acres of industrial land?

Five acres allows up to 130,680 sq ft on one floor at 60% coverage, enough for a large warehouse or distribution centre, a factory with a big open yard, or subdivision into smaller lots with the land office's approval and planning permission. In Klang and Port Klang the median recorded warehouse sale sat on 155,145 sq ft of land, smaller than 5 acres.

How much land do I need to park ten 40 ft container trucks?

About 15,600 sq ft (0.36 acre) of paved bays and manoeuvring space for ten trailers in one row, using PLANMalaysia's 4 m x 18 m bay plus 18.3 m to manoeuvre. Two rows of five facing one shared aisle need about 11,700 sq ft. The gate, driveway and setbacks come on top, and a yard run as a haulage business needs planning permission for that use.

How much land do I need for a 100,000 sq ft warehouse?

For a single-storey building at the 60% plinth cap, at least 166,667 sq ft of land, about 3.83 acres, before you check setbacks, parking and the trailer yard. The rules would also ask for at least 10 lorry bays and about 40 car bays for the storage floor alone. A trailer yard in front usually pushes the land needed higher.

Is 400 ft by 400 ft 1 acre?

No. 400 ft x 400 ft is 160,000 sq ft, about 3.67 acres. One acre is 43,560 sq ft, a square of about 208.7 ft on each side, and a third of an acre is 14,520 sq ft.

FactoryHub is dedicated to helping every client find the right factory or warehouse. To shortlist land that fits your floor area, trucks and power before you buy, or to sell or lease out a large plot, talk to Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.