Key Takeaways
- Malaysia grades factories as light, medium or heavy industry in three separate places: the express condition on the land title, the zoning in the council's local plan, and the Department of Environment (DOE) siting guideline that grades each activity by pollution and risk. A factory has to fit all three.
- DOE's Guidelines for Siting and Zoning of Industry and Residential Areas (October 2012) set indicative minimum buffers from homes of 50 m for light, 150 m for medium, 300 m for heavy and 1 km for high risk industry. Selangor's planning manual uses 50 m, 150 m and 300 m, measured from the factory wall to the wall of the nearest house.
- In DOE's activity list, semiconductors, garments, printing and factory bakeries are light; plastic moulding, furniture, metal plating, paint and car assembly are medium; foundries, forging and stamping, steel mills and scrap recovery are heavy.
- Before you rent or buy, read the express condition on an official title search, check the lot's zoning on SISMAPS or PLANMalaysia's i-Plan, match your process to the DOE list and measure the distance to the nearest house, school or hospital.
- Using land against its express condition makes it liable to forfeiture under section 127 of the National Land Code, so a heavier process on a lighter title needs the condition amended first.
What do light, medium and heavy industry mean in Malaysia?
The three classes describe how much noise, air emission, wastewater, hazardous material and fire risk an industrial activity produces, and therefore how far it must sit from homes. No single Act defines them. The class shows up in three documents, each checked by a different authority.
1. The land title (land office)
The National Land Code (Act 828) gives every alienated lot one of three categories of land use: agriculture, building or industry (section 52). Industry land may only be used for factories, workshops, foundries, warehouses and similar installations for manufacture, smelting, power, and the assembling, processing, storage, transport or distribution of goods (section 117). The state then adds express conditions under sections 120 and 122.
In Selangor, Land and Mines Office circular PTG 4/98 standardised those conditions and split the industry category into three: Industri Ringan (light), Industri Sederhana (medium) and Industri Berat (heavy). That is why many Selangor industrial titles name the class.
2. The local plan (council and PLANMalaysia)
Each council's local plan (Rancangan Tempatan) zones land for industry and applies the state's planning standards, including the buffer each class must keep from housing. Planning permission and building plans for a factory are approved against this plan.
3. The DOE siting guideline
DOE grades the activity itself. Its 2012 guideline, known as SZIRA, lists industries by Malaysia Standard Industrial Classification (MSIC) code with a category and a buffer distance for each. MIDA's investor policy booklet names SZIRA 2012 and DOE's Environmental Essentials for Siting of Industries in Malaysia (EESIM) 2017 as the guidance for choosing a site, with buffer zones set by PLANMalaysia.
The title says what the land may be used for, the local plan says what the area is planned for, and the DOE grade says what your process really is. Problems start when the three do not line up.
How does DOE classify an industry?
SZIRA's Appendix A sorts industries into five categories by pollution potential and risk:
| SZIRA category | Typical features | Indicative minimum buffer from homes and other sensitive receptors |
|---|---|---|
| 1. High risk | Very high fire, explosion, radiation or chemical risk; large wastewater and scheduled waste loads | 1 km or more, actual distance set by modelling |
| 2. Heavy | High air pollution and odour, excessive noise or vibration, large wastewater volumes, scheduled waste that is hard to treat | 300 m or more |
| 3. Medium | Moderate pollution, fire and chemical risk; noise or vibration with no significant residual impact; scheduled waste that can be managed | 150 m or more |
| 4. Light | Little or no air, noise, odour, fire or explosion risk; no hazardous raw materials; little wastewater; mostly non-hazardous waste | 50 m or more |
| 5. Cottage | Home based, mostly hand made, low energy | No minimum; 10 m or more if noise and heat are significant |
Primary, secondary and overall buffer
SZIRA splits the distance in two. The primary buffer lies outside your boundary: roads, drains, rivers, car parks, parks, commercial uses, warehouses that hold no hazardous goods and light workshops are acceptable there. The secondary buffer lies inside your own lot: offices, car parks, building setbacks and packing areas. The overall buffer is the two added together, and the primary part must always be met. Next to hospitals, schools and places of worship, SZIRA leaves warehousing, industry and service workshops out of the uses allowed in the primary buffer.
Which activities fall in each class?
These examples come from SZIRA's Appendix B. The overall buffer is the figure DOE lists for that activity.
| Activity (MSIC code) | SZIRA class | Overall buffer |
|---|---|---|
| Semiconductors, integrated circuits, bare circuit boards (26261) | Light | 100 m |
| Garments (14141) | Light | 100 m |
| Factory scale bakery, noodles, confectionery (10107) | Light | 100 m |
| Soft drinks and bottled water (111101104) | Light | 150 m |
| Printing of books, magazines and posters (181811811) | Light | 150 m |
| Electric motors, transformers, switchgear (27271) | Light | 150 m |
| Toys and games (32324) | Light | 60 m |
| Plastic products by injection, extrusion or blow moulding (22222) | Medium | 200 m |
| Furniture (31310) | Medium | 200 m |
| Bleaching and dyeing of textiles (131311313) | Medium | 200 m |
| Metal doors, windows, gates and structural steel (252512511) | Medium | 250 m |
| Plating, anodising, heat treatment and machining of metal (252592592) | Medium | 250 m |
| Motor vehicles (29291) | Medium | 250 m |
| Soap, detergents and perfumes (202012023) | Medium | 250 m |
| Paints, varnishes and lacquers (202012022) | Medium | 300 m |
| Lithium batteries (27272) | Medium | 300 m |
| Forging, pressing, stamping and roll forming (252592591) | Heavy | 350 m |
| Steel rolling and finishing mills (24241) | Heavy | 350 m |
| Recovery of metal and other scrap (38383) | Heavy | 350 m |
| Casting of iron, steel and non-ferrous metals (24243) | Heavy | 500 m |
| Slaughterhouses (10101) | Heavy | 500 m |
| Petroleum refining, pesticides, explosives, hazardous waste treatment | High risk | 1,000 m |
Two details catch people out. The same product family can split: SZIRA puts primary cells in light but lithium batteries in medium. And many food and manufacturing rows carry a note asking for a 20 m buffer around auxiliary equipment such as boilers, blowers, gensets, pumps and 1,000 litre fuel storage, even when the main process is light.
What buffer zone does each class need in Selangor?
Selangor councils apply the state's Manual Garis Panduan dan Piawaian Perancangan Negeri Selangor. Its fourth edition, approved by the state executive council in 2022 according to PLANMalaysia Selangor, sets these buffers in standard IND1-4:
| Class | Buffer zone | Planting strip inside the buffer |
|---|---|---|
| Heavy industry | 300 m | 20 m |
| Medium industry | 150 m | 10 m |
| Light industry | 50 m | 10 m |
- The distance runs from the wall of the industrial building to the wall of the nearest house.
- The council may consider a shorter distance for industries with little noise and air pollution.
- Shop offices, roads, drains, rivers, lakes, ponds, car parks, open space, forest, service industries, non-food warehouses and agriculture may sit inside the physical buffer.
Councils carry the same figures into their local plans. Subang Jaya's local plan 2035, for example, applies 300 m with a 20 m planting strip for heavy or high risk industry, 150 m and 10 m for medium and 50 m and 10 m for light, across estates such as Bukit Serdang, Kinrara, Puchong, Subang Hi-Tech and UEP.
PLANMalaysia Selangor approved a newer 2025 edition of the manual in November 2025, sold as a printed set, so ask the council's One Stop Centre which figure applies when you submit plans.
Why some sources still quote 500 m and 250 m
Older DOE guidance used bigger round numbers. DOE's Environmental Requirements: A Guide for Investors (October 2010) listed 30 m for light industry type A, 50 m for light type B, 250 m for medium, 500 m for heavy and 200 m for special high technology industry. Older articles and listings still repeat those figures. The 2012 guideline and the Selangor manual work from minimums of 50, 150 and 300 m, with modelling for anything hazardous.
Where does the class appear on a land title, and can it be changed?
Circular PTG 4/98 lists the uses that count as an industrial lot in Selangor: industri, industri ringan, industri sederhana, industri berat, motorcycle and car repair workshops, electrical substations, high tech industry and flatted factories (industri bertingkat). Some titles state only Industri, with no class. The local plan and the approved building plans then decide what can run there.
To move a lot to a heavier class, the owner applies to the district land office to amend the express condition under section 124 of the Code. The Klang District and Land Office guide lists a RM60 application fee to amend an express condition, with the Menteri Besar as the approving authority. For agricultural land being converted, it lists premiums of 20% for light, 25% for medium and 30% for heavy industry, charged on the newly approved land value. Confirm the current figures with the land office before you budget; our industrial land conversion guide covers the process.
How do I check the class of a factory before I rent or buy?
- Get an official title search. A carian rasmi on e-Tanah shows the category of land use and the express condition. Our e-Tanah land search guide walks through it.
- Look up the zoning. SISMAPS, PLANMalaysia Selangor's planning information system, lets the public search a lot and its zoning. i-Plan is PLANMalaysia's national land use map. For a firm answer, ask the council's planning department.
- Find your activity's DOE class. Take the MSIC code of your process and find it in SZIRA's Appendix B. If your process grades heavier than the title or zone, stop there.
- Measure the distance to sensitive neighbours. Measure from the factory wall to the nearest house, and check for schools, hospitals and places of worship nearby.
- Check that the building's approvals match. The approved plans and CCC should cover the use you intend. Under the Town and Country Planning Act 1976, a material change in the use of any land or building is development, and development needs planning permission (section 19). Our factory due diligence checklist lists the documents.
- For a new plant, ask DOE before you commit. SZIRA advises investors to submit the site and obtain DOE's views before fully committing to buy it.
- Put it in writing. Have the tenancy or sale agreement state your process and the owner's confirmation that the title and approvals allow it.
What happens if your factory does not match the class?
On the land side, section 127 of the National Land Code makes land liable to forfeiture when any condition is breached. The Land Administrator may instead serve a Form 7E notice to show cause why a fine should not be imposed, or a Form 7A notice under section 128 asking for the breach to be remedied. On the approval side, DOE's site suitability criteria in SZIRA ask whether the project conflicts with the gazetted structure or local plan and whether the site meets the buffer for that activity, so a process heavier than its zone is hard to approve. A tenant does not own the title, but an enforcement notice on the landlord's land still stops the tenant's operation.
Is a warehouse treated as light industry?
Section 117 counts the storage and distribution of goods as an industrial purpose, so a warehouse needs industry land too. In buffer terms it is the lightest use: SZIRA accepts warehouses that hold no hazardous or dangerous goods inside the primary buffer next to housing, and the Selangor manual allows non-food warehouses inside the physical buffer. A store for chemicals or dangerous goods is graded by its risk instead. For which Klang areas take which class, see our Port Klang industrial zones comparison.
Practical steps: more questions
How do I check whether a factory is light, medium or heavy industrial?
Read the category and express condition on an official title search, check the zoning of the lot on SISMAPS or the council's local plan, and match your process to its MSIC class in DOE's siting guideline. Then measure the distance to the nearest house and confirm that the approved building plans and CCC cover your use.
This guide explains the rules in general and is not legal advice; ask a lawyer or registered town planner about a specific lot.
Jason Low (PEA 1478) shows how to check light or heavy industrial use for a factory in Rawang and Shah Alam before you sign.
Frequently Asked Questions
Can a heavy industrial factory be used for chemical production?
Sometimes, but a heavy industrial title is not enough on its own. DOE grades paints, printing ink, soaps and detergents as medium industry, which heavy land can take, but basic chemicals and pesticides are high risk, needing at least 1 km from homes set by modelling, more than the 300 m for heavy industry. Chemical production of 100 tonnes a day or more needs an approved EIA first, and you also need Bomba, scheduled waste and council approvals. Ask DOE for its view on the site before you commit.
Where can I find a factory suitable for building material production?
It depends on the material. DOE's siting guideline puts precast concrete, ready-mix, clay bricks and roof tiles in Category 3 (medium industry) with a 300 m buffer from homes, and cement, lime and glass in Category 2 (heavy industry) with 350 m to 1,000 m. In FactoryHub's experience, heavy lots are found in Pulau Indah, Westport, Kapar, Banting (Olak Lempit) and Jenjarom, and mainly medium ones in Telok Gong, Bukit Raja and Telok Panglima Garang. Check the title condition, yard space, floor loading and truck access.
What are the heavy industries in Malaysia?
In DOE's 2012 siting guideline, heavy industries include iron and steel making, rolling mills, metal casting and foundries, forging, pressing and stamping, flat glass, slaughterhouses and the recovery of metal scrap. They need a buffer of at least 300 m from homes, set higher by modelling for difficult processes. Petroleum refining, pesticides, explosives and hazardous waste treatment sit in a separate high risk class with at least 1 km.
What is the difference between light industrial and heavy industrial?
Light industry has little or no air pollution, noise, odour or fire risk, uses no hazardous raw materials and produces little wastewater, so it can sit at least 50 m from housing. Heavy industry produces high emissions, noise or vibration, large wastewater volumes or hard to treat scheduled waste, so it needs at least 300 m and usually a designated heavy industrial estate. The land title, local plan and DOE grade must all allow the class you run.
What are examples of light industry?
SZIRA grades semiconductors and circuit boards, garments, factory scale bakeries and noodle plants, soft drinks, printing, electric motors and transformers, and toys as light industry. Their listed overall buffers run from 60 m to 150 m. For many of these plants SZIRA also asks for a 20 m buffer around boilers, gensets, pumps and fuel tanks.
What is medium industry in Malaysia?
Medium industry has moderate pollution and fire risk that can be controlled, such as plastic injection moulding, furniture, metal fabrication and plating, paint, soap and detergents, car assembly and lithium batteries. DOE's indicative minimum buffer is 150 m, and Selangor's planning standard is 150 m with a 10 m planting strip.
How far must a factory be from houses in Selangor?
Under the fourth edition of the Selangor planning manual, heavy industry needs 300 m, medium 150 m and light 50 m, measured from the factory wall to the wall of the nearest house. The buffer must include a planting strip of 20 m for heavy and 10 m for medium and light industry. A 2025 edition was approved in November 2025, so confirm the current figure with the council.
Can I run a medium industry factory on light industrial land?
Not without approval. If the express condition says light industry, a medium process breaches the condition and the land becomes liable to forfeiture under section 127 of the National Land Code. The owner must apply under section 124 to amend the condition, and the council and DOE must accept the activity at that location.
FactoryHub is dedicated to helping every client find the right factory or warehouse. To check the title class, zoning and buffer of a unit before you view it, contact Peter Tan (REN 12771, 016-666 6872) or Jason Low (PEA 1478, 012-288 1834), or browse heavy industrial factories for rent in Selangor.
