Key Takeaways

  • Pioneer status and the old investment tax allowance are closed to new manufacturing applications. Since 1 March 2026, MIDA assesses every new manufacturing incentive under the New Incentive Framework (NIF): you choose either a Special Tax Rate of 0% to 10% for up to 10 years or an Investment Tax Allowance of up to 100% of qualifying capital expenditure for up to 10 years, and an outcome scorecard decides where in that range you land.
  • A foreign-owned manufacturer gets the same incentives as a local one if its company is incorporated and tax resident in Malaysia. Only the small-company tier needs Malaysian shareholders. Apply before your first sales invoice, because spending incurred before the application date does not count.
  • An existing plant that expands has three routes: the Reinvestment Allowance claimed in the tax return (60% of spending on factory, plant and machinery, now under review after Budget 2027), MIDA's NIMP 2030 reinvestment incentive (applications until 31 December 2028) and the Automation Capital Allowance of 200% on the first RM10 million (applications until 31 December 2027).
  • Green investment tax allowances run until 31 December 2026. Budget 2027 proposes a 2027 to 2030 version with narrower lists: solar only as part of a system with battery storage, and no green building item.
  • Incentives shape the property decision. Buying the factory you already rent earns no Reinvestment Allowance unless the space is used for an expansion or diversification project, the allowance is withdrawn if the asset is sold within five years, and a plant exporting at least 80% of its output can apply for Licensed Manufacturing Warehouse status outside a free zone.

This guide is for owners and finance heads of manufacturing companies, Malaysian or foreign, who are about to rent, buy or build a detached or semi-detached factory, a large warehouse or industrial land in Selangor and the Klang Valley, and who want the tax incentive built into the plan from day one. Each section gives the direct answer first, then the rule and its source, then what to check. It is general information, not tax or legal advice: the rates and conditions in your own MIDA approval letter decide your case, so confirm them with MIDA and a licensed tax agent.

What tax incentives can a manufacturer get in Malaysia now?

It depends on whether the project is a new investment or an expansion of a plant that has run for at least 36 months. The table lists the incentives in force on 15 November 2026, what each gives and who handles it.

Incentive Who it is for What you get Apply to Application window
NIF Special Tax Rate New investment in one of 15 manufacturing subsectors Tax rate of 0% to 10% for up to 10 years (0% to 15% for up to 15 years in a less developed area) MIDA, InvestMalaysia portal From 1 March 2026
NIF Investment Tax Allowance Same as above Up to 100% of qualifying capital expenditure for up to 10 years, set against 70% to 100% of statutory income MIDA From 1 March 2026
Reinvestment Allowance (Schedule 7A) Manufacturer in operation 36 months or more that expands, modernises, automates or diversifies 60% of capital spending on factory, plant or machinery, set against 70% of statutory income, for 15 years Self-claim in the tax return In force, under review
NIMP 2030 reinvestment incentive Existing manufacturer that has started claiming Reinvestment Allowance 100% (Tier 1) or 60% (Tier 2) of qualifying capital expenditure, land excluded, incurred over 5 years MIDA Until 31 December 2028
Automation Capital Allowance Manufacturer in operation 36 months or more 200% allowance on the first RM10 million of automation spending MIDA, with SIRIM verification Until 31 December 2027
Green Investment Tax Allowance Company buying green assets for its own use (Asset), or running a green energy project (Project) 100% or 60% allowance, mostly set against 70% of statutory income MGTC (Asset), MIDA (Project) Until 31 December 2026, 2027 to 2030 proposed
Accelerated Capital Allowance Buyers of plant and machinery from local manufacturers, ICT equipment and software Cost written off in two years: 20% initial plus 40% annual allowance Self-claim 11 October 2025 to 31 December 2026, extension to 2030 proposed
Import duty and sales tax exemption on machinery Manufacturers in the Principal Customs Area Exemption on new, unused machinery used directly in production MIDA confirmation letter, then Customs Before you import or buy

Sources for the table: the MIDA NIF guideline linked above, LHDN Practice Note 3/2026, MIDA's NIMP 2030 reinvestment guideline, MIDA's Automation CA guideline, the Budget 2027 tax measures and MIDA's machinery exemption guideline.

What replaced pioneer status and the investment tax allowance?

The New Incentive Framework. According to MIDA's NIF FAQ, the last manufacturing applications under the Promotion of Investments Act 1986 were accepted at 3.00pm on 28 February 2026, and every manufacturing application submitted from 1 March 2026 is assessed under the NIF. Incentives approved before that date continue on their original terms, and applications submitted before it are still assessed under the old framework. MIDA's 30 January 2026 release confirmed that existing approvals are not affected.

Special Tax Rate or Investment Tax Allowance

You must pick one, and the choice is final once MIDA accepts the application. The MIDA guideline (as at 10 July 2026) sets these ranges for the Special Tax Rate:

Category Special Tax Rate Period
New investment 0% to 10% Up to 10 years
Less developed area 0% to 15% Up to 15 years
Small company (Malaysian-owned) 3% to 12% Up to 15 years

The Investment Tax Allowance is up to 100% of qualifying capital expenditure incurred over up to 10 years, set against 70% to 100% of statutory income, with any unused allowance carried forward until used up. Losses made during a Special Tax Rate period can be carried forward for seven years. The two work differently: the Special Tax Rate lowers the rate on taxable profit, so it pays only in profitable years, while the allowance is tied to capital spending and carries forward until used. If the project needs a building and heavy machinery up front, ask your tax agent to run both options on your own budget before you choose. For comparison, LHDN's company tax rate table puts companies outside the small and medium band at 24%.

Where you land in the range: the NIA scorecard

MIDA scores each project on six pillars: economic complexity (product complexity, R&D spending, automation and Industry 4.0), high-value jobs (share of skilled staff, median salary, share earning RM10,000 or more, Malaysians in managerial and technical posts), domestic linkages (local inputs, training spend, work with local universities, vendor development), industrial clusters, inclusivity, and sustainability. A better score earns a better package. The approval letter then sets two levels: meeting the minimum conditions gives Tier 2 for that year of assessment, meeting the minimum and the additional conditions gives Tier 1, and missing the minimum conditions means no incentive that year, taxed at the normal rate. The guideline does not publish the rate attached to each tier; your letter states it.

Who is eligible, and what is excluded

The 15 subsectors are electrical and electronics, chemicals, pharmaceuticals, medical devices, aerospace, machinery and equipment, automotive, petroleum products and petrochemicals, oleochemicals, food production and processing, wood, paper and furniture, textiles, apparel and footwear, strategic mineral-based products, rubber-based products, and metal. Excluded activities include chemical mixing and blending, pharmaceutical fill and finish, gloves and passenger car tyres, all paper except security paper, vape products, weapons and liquor.

Sector conditions in Appendix I of the guideline matter for factory planning:

  • Capital investment per employee of RM140,000 for petrochemicals, oleochemicals, food, wood, paper and furniture, textiles, strategic minerals, rubber and metal. Capital investment includes fixed assets and 10 years of rent for land and building, divided by full-time employees.
  • Automation or Industry 4.0 in the process for petrochemicals, food, oleochemicals, wood, paper and furniture, textiles, rubber and metal.
  • At least 80% Malaysian citizens in the workforce for wood, paper and furniture, textiles, strategic minerals, rubber and metal.
  • Sustainable practices on waste, raw materials, water and energy for most of the same subsectors, and separate accounts for incentivised and other activities.

The evaluation fee is RM2,500 per application, according to the NIF FAQ.

What tax incentives do foreign manufacturers get in Malaysia?

The same ones as Malaysian-owned manufacturers, provided the investing company is incorporated under the Companies Act 2016 and resident in Malaysia. MIDA's equity policy has allowed 100% foreign equity in new manufacturing projects, and in expansion or diversification projects, since June 2003. Four points weigh more for a foreign group:

  1. The small-company tier is closed to you. It needs at least 60% Malaysian equity (shareholders' funds up to RM500,000) or 100% Malaysian equity (above RM500,000 up to RM2.5 million). A foreign-owned plant sits in the new-investment or less-developed-area range.
  2. "New company" has a group test. The NIF treats a company as new only if it has no related entity in Malaysia, or its related entity carries on a different project. A 20% shareholding link makes companies related. If your group already makes the same product through another Malaysian company, ask MIDA how the application will be classed.
  3. The manufacturing licence comes first. The NIF needs a manufacturing licence under the Industrial Co-ordination Act 1975 before the incentive application, valid for the whole incentive period, or an ICA 10 exemption letter if shareholders' funds are at most RM2.5 million and you employ at most 75 full-time staff. Our manufacturing licence guide explains the steps.
  4. Large groups may pay a top-up tax. Section 7 of the guideline notes that Malaysia has applied the global minimum tax since 2025: groups with annual revenue of at least EUR 750 million can be charged a domestic top-up tax if their effective rate in Malaysia is below 15%. Model the incentive with that in mind.

For the full sequence (company, licences, expatriate passes, moving machines, rent or buy), see our guide to setting up a factory in Malaysia as a foreign company.

Investors touring an empty new detached factory hall with machinery crates in a Malaysian industrial estate
IllustrationInvestors touring an empty new detached factory hall with machinery crates in a Malaysian industrial estate

How do you apply through MIDA, step by step?

  1. Talk to MIDA before you commit. The guideline invites a pre-application consultation: 03-2267 3633 or investment@mida.gov.my.
  2. Hold the manufacturing licence or the ICA 10 letter.
  3. Submit a complete application on the InvestMalaysia portal before your first sales invoice. MIDA defines the start of operation as the date of the first sales invoice for the proposed product. Incomplete applications are returned.
  4. Scorecard and decision. MIDA evaluates the project and the National Committee on Investment decides. You receive a principle approval letter stating the incentive, the tiers and the conditions.
  5. Fix the start date on time. Special Tax Rate: apply to determine the commencement year of assessment within 24 months of the letter, then file an Annual Compliance Report within seven months after each year of assessment. Investment Tax Allowance: within 36 months, apply for the commencement date and submit an auditor-verified declaration that the minimum conditions are met; after each five-year ITA period, declare compliance with all conditions within seven months. Miss the 24 or 36 month deadline and the approval is cancelled automatically.
  6. Claim in the tax return once the approval letter with the commencement date arrives. LHDN audits claims and can raise additional assessments if conditions are not met.

MIDA does not publish a processing time for NIF applications, so ask for one at the consultation and build it into your move-in timeline.

Mistakes that cost the incentive

  • Invoicing a trial order before applying. The first sales invoice marks the start of operation, and the application must come before it.
  • Paying for the building or machines before applying for an ITA. The NIF FAQ says only capital expenditure incurred after the application date qualifies, and it cannot be backdated.
  • One set of books. The NIF requires separate accounts for the incentivised activity.
  • Letting the 24 or 36 month deadline pass.

Which incentives apply when you expand an existing plant?

Reinvestment Allowance

LHDN Practice Note 3/2026 (29 September 2026) sets out the rules. A resident company in operation for at least 36 months that spends on factory, plant or machinery for an expansion, modernisation, automation or diversification project gets 60% of that spending as an allowance, set against 70% of statutory income (100% if the project reaches a productivity level set by the Minister), for 15 consecutive years from the first claim. No written approval is needed: you claim it in the tax return, subject to audit. Unused allowance can be carried forward for seven years after the 15 years end.

In the Budget 2027 speech on 9 October 2026, the government said the Reinvestment Allowance "is being reviewed, including examining the eligibility criteria and the mechanism for providing the incentive". Until revised rules are published, the Schedule 7A rules above are the ones in the practice note, so check for changes before you plan a large claim. NIF incentives and the Reinvestment Allowance are mutually exclusive: a company on the allowance may stay on it or apply under the NIF for a different project.

NIMP 2030 reinvestment incentive

This MIDA incentive is for manufacturers that have operated for at least 36 months and have already started claiming the Reinvestment Allowance, including those whose 15 years have ended. Any earlier incentive period must be over, and each company gets one round only.

  • Tier 1: 100% of qualifying capital expenditure (land excluded) incurred within 5 years, set against up to 100% of statutory income.
  • Tier 2: 60%, set against up to 70% of statutory income.
  • Minimum conditions: the capital spending realised within three years as proposed, Industry 4.0 technology, and R&D spending as proposed.
  • Additional conditions for Tier 1: new full-time Malaysian staff in high-value jobs (basic salary of at least RM10,000 a month), local suppliers, and green technology such as renewable energy or energy-efficient equipment.

Apply before the first sales invoice of the project. Spending before the application is not qualifying. Eligible subsectors include aerospace, automotive, chemicals, electrical and electronics, food processing, halal, machinery and equipment, medical devices, metal, minerals, palm oil-based products, pharmaceuticals, petrochemicals, rail, rubber, shipbuilding, textiles, and wood, paper and furniture.

Automation Capital Allowance

The allowance is 200% on the first RM10 million of qualifying spending incurred in the years of assessment 2023 to 2027, for applications MIDA receives by 31 December 2027. You need 36 months in manufacturing, the manufacturing licence or ICA 10 letter, a copy of your business licence, and at least one machine or system with an Industry 4.0 element. SIRIM verifies that the equipment raises productivity, through a site visit it quotes a fee for, and an external auditor certifies the equipment list, invoices and proof of full payment. Replacing a machine with one of the same specification does not qualify, and the allowance cannot be claimed in the same year of assessment as the Reinvestment Allowance, the Allowance for Increased Exports or incentives under the 1986 Act.

Budget 2027 measures for machine buyers

  • The Accelerated Capital Allowance on plant and machinery from local manufacturers, ICT equipment and software (20% initial and 40% annual) covers spending from 11 October 2025 to 31 December 2026, and the budget proposes extending it to 31 December 2030.
  • From 1 January 2027, the budget proposes a sales tax refund for local traders and distributors that paid sales tax on machinery, spare parts and equipment supplied to manufacturers. Today the exemption only works when the manufacturer imports directly or buys from a registered local manufacturer.

What green incentives can a factory claim?

Two schemes run until 31 December 2026, as the Budget 2027 tax measures summarise:

  • GITA Asset (own consumption), through MGTC: Tier 1, 100% allowance set against 70% of statutory income, for assets on the Finance Minister's list, battery energy storage and green buildings. Tier 2, 60% against 70%, for listed assets, renewable energy systems and energy efficiency. Under MGTC's GITA Asset guideline, the asset must be new, owned by the company, used in its business in Malaysia for its own consumption, and the processing fee runs from RM2,500 (assets under RM500,000) to RM10,000 (above RM5 million).
  • GITA Project (business purposes), through MIDA: green hydrogen, integrated waste management, EV charging and renewable energy generation including solar.

Budget 2027 proposes these lists for 2027 to 2030:

Scheme Tier 1: 100% allowance Tier 2: 60% allowance, against 70% of statutory income
GITA Asset Vehicles on the Finance Minister's list (buses, vans, forklifts, terminal tractors, lorries and prime movers), locally produced EV infrastructure, composting and recycling systems, wastewater recycling and rainwater harvesting; renewable energy (including solar) integrated with battery or energy storage; set against 70% of statutory income EV infrastructure, composting and recycling, wastewater and rainwater systems; renewable energy from biomass, biogas, mini hydro, geothermal or wind
GITA Project Green hydrogen and ocean thermal energy, 5 plus 5 years EV charging stations and renewable energy from biomass, biogas, mini hydro, geothermal or wind, 5 years

Under the proposal, companies apply to MGTC within 24 months of buying the asset. Green buildings, stand-alone energy efficiency equipment and solar without storage are not on the proposed lists, so the purchase date decides which list applies to your roof or building. These are proposals until the law is passed. MGTC's condition is that the company owns the asset and uses it for its own consumption, so a tenant that buys its own system should ask MGTC whether it qualifies; landlord consent for the roof is a separate question, covered in FactoryHub's guide on solar for rented factories. The NIF scorecard also rewards solar panels, water-efficient equipment and a wastewater plan under its sustainability pillar.

Factory with rooftop solar panels, battery storage cabinets, rainwater tank and an electric forklift
IllustrationFactory with rooftop solar panels, battery storage cabinets, rainwater tank and an electric forklift

How do incentives change where and how you set up the factory?

Location

  • Less developed areas. The guideline defines them as districts scoring below the national median on the Malaysian Composite Development Index (IKPM), which allows a 0% to 15% rate for up to 15 years. It does not list the districts, so ask MIDA in writing whether your shortlisted district qualifies before you sign for land or a building.
  • Export plants outside a free zone. MIDA's infrastructure page says companies whose output is entirely or at least 80% for export and whose inputs are mainly imported are normally approved as Licensed Manufacturing Warehouses, with facilities similar to a Free Industrial Zone. That lets an exporter choose a factory in an ordinary industrial estate. For customs-licensed storage, see our bonded warehouse guide.
  • People, port and power. Incentive conditions on Malaysian hires and skilled staff make the labour catchment part of the tax plan. Our factory site selection checklist covers workers, ports, power and flood history.

Rent, buy or build

  • Renting does not fail the capital test. The NIF counts 10 years of rent for land and building as capital investment when it works out the RM140,000 per employee figure.
  • What counts as qualifying capital expenditure. MIDA's incentive booklet has long defined it as factory, plant, machinery or other equipment used for the approved project, and the NIMP 2030 guideline excludes land. The NIF guideline does not spell out whether a building you buy counts, so get the answer in your approval letter before you rely on it.
  • Reinvestment Allowance on a factory building. LHDN Public Ruling 10/2022 defines a factory as floor area used for the qualifying project, with storage capped at one tenth of that area and sales offices excluded. Its Example 18 is a manufacturer in Klang that buys the factory it has rented for three years: no allowance, because the building is not used for a qualifying project. A tenant that builds an extension to its rented factory for an expansion can claim. A company that relocates and expands gets the allowance only on the extra floor area: in Example 20, a manufacturer using 20,000 square metres in Rawang builds a new 42,000 square metre factory in Shah Alam for RM4 million and claims on 52.38% of the cost, RM2,095,238.
  • Holding period. Reinvestment Allowance is withdrawn if the asset is disposed of within five years of acquisition, and a change in the use of factory floor area counts as ceasing to use it. Do not plan a sale or a change of use inside five years without your tax agent.
  • Industrial Building Allowance is a separate, self-claimed allowance on buildings bought or built for manufacturing; see our Industrial Building Allowance guide.

Timing checklist before you sign

  1. Consult MIDA and confirm the subsector, the tier you are aiming for and, if relevant, the less developed area status of the district.
  2. Apply for the manufacturing licence or ICA 10 letter.
  3. Submit the incentive application before you pay for the main capital items you want counted, and before any sales invoice.
  4. Fix the premises before you apply for machinery or raw material exemptions: MIDA's raw material guideline asks for a layout plan of machinery in the approved premises and a DOSH registration certificate or acknowledgement.
  5. Keep the council business licence current: the Automation Capital Allowance asks for a copy.

What are Malaysia's export advantages for manufacturing?

  • Trade agreements. The MITI Report 2023 lists 16 free trade agreements in force: seven bilateral (Australia, Chile, India, Japan, New Zealand, Pakistan and Türkiye) and nine regional through ASEAN, including RCEP and CPTPP, plus the OIC trade preferential system and the D-8 preferential trade agreement that entered into force for Malaysia in 2023.
  • Free zones and Licensed Manufacturing Warehouses. A free zone is treated as outside the Principal Customs Area with minimal customs formalities. FIZ and LMW companies selling finished goods into the local market can get import duty treatment equivalent to ASEAN (ATIGA) rates if the goods reach 40% local content, or if they prove substantial transformation.
  • Duty exemption on inputs. MIDA considers import duty exemption on raw materials and components used directly in production and imported directly, with separate applications for the domestic market and for the export, free zone or LMW market. Each submission must involve at least RM5,000 of duty or tax, and you apply before importing.
  • Machinery. Manufacturers in the Principal Customs Area can claim import duty and sales tax exemption on new, unused machinery used directly in production, with the MIDA letter submitted to Customs before import or purchase.

Frequently Asked Questions

What tax incentives do foreign manufacturers get in Malaysia?

Foreign-owned manufacturers get the same incentives as local ones if the company is incorporated under the Companies Act 2016 and resident in Malaysia: under the NIF, a Special Tax Rate of 0% to 10% for up to 10 years or an Investment Tax Allowance of up to 100% of qualifying capital expenditure. The small-company tier needs Malaysian equity, so foreign plants fall in the new-investment or less-developed-area range. Groups with global revenue of at least EUR 750 million should also model the 15% minimum tax.

What incentives does MIDA give?

MIDA evaluates the NIF Special Tax Rate and Investment Tax Allowance for new projects, the NIMP 2030 reinvestment incentive, the Automation Capital Allowance (with SIRIM), the GITA Project incentive, and import duty and sales tax exemptions on machinery, raw materials and components. The Reinvestment Allowance, Industrial Building Allowance and Accelerated Capital Allowance are claimed directly in the tax return, and GITA Asset goes to MGTC.

Is pioneer status still available in Malaysia?

Not for new manufacturing applications. The last applications under the Promotion of Investments Act 1986 were accepted at 3.00pm on 28 February 2026, and companies already approved keep their pioneer status or ITA on the approved terms. New projects apply under the NIF, where the Special Tax Rate takes its place.

Can I apply for an incentive after my factory has started production?

Under the NIF, no: the application must reach MIDA before the first sales invoice for the proposed product. An existing plant can still apply for a different, new project, or use the Reinvestment Allowance, the NIMP 2030 reinvestment incentive or the Automation Capital Allowance when it expands.

Does buying the factory building count for the incentive?

For the Reinvestment Allowance, only the floor area used for an expansion, modernisation, automation or diversification project counts, and buying a factory you already rent does not qualify on its own. For the NIF Investment Tax Allowance, MIDA's usual definition of qualifying capital expenditure includes the factory, but land is excluded under the NIMP 2030 incentive and your approval letter decides. Spending before the application date never counts.

How much does a MIDA incentive application cost and how long does it take?

The NIF evaluation fee is RM2,500 per application, and the Automation Capital Allowance adds a SIRIM site verification fee quoted case by case. MIDA does not publish a processing time; every NIF case goes to the National Committee on Investment, so ask MIDA for an estimate at the pre-application consultation.

What are Malaysia's export advantages for manufacturing?

Sixteen free trade agreements in force according to MITI's 2023 report, including RCEP and CPTPP, free zones and Licensed Manufacturing Warehouses for plants exporting at least 80% of output, and import duty exemptions on machinery and on raw materials for export production. LMW status lets an exporter run from an ordinary industrial estate instead of a free zone.

FactoryHub is dedicated to helping every client find the right factory or warehouse. If you are weighing a site for a new or expanded plant in Selangor, call Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834 to put the building's specs, approvals and registered prices next to your incentive plan.