Key Takeaways
- A bonded storage warehouse in Malaysia is a licensed warehouse (gudang berlesen, GB) under section 65 of the Customs Act 1967. Duty and tax on the goods inside are deferred until the goods leave for the local market or are re-exported (JKDM: Licensed Warehouse).
- Goods deposited in a licensed warehouse must be cleared within two years of deposit, unless the Director General of Customs approves a longer period (Customs Act 1967, section 65(5)).
- Most importers simply rent space in a public licensed warehouse (GBA) run by a logistics operator. A private licence (GBP) stores only your own goods and needs at least RM100,000 paid-up capital, at least RM2 million of goods stored a year and a bank guarantee of 50% of the estimated yearly duty for a new licence (JKDM licensing rules).
- A bonded warehouse sits inside Malaysia's principal customs area. A free zone such as PKFZ, or the free commercial zones at Northport, Westport and Southport, is treated as outside it, so the duty position and the customs forms are different.
- A bonded warehouse is for storing and handling goods. Manufacturing with duty suspended needs a different licence under section 65A, the Licensed Manufacturing Warehouse (LMW).
What is a bonded storage warehouse in Malaysia?
"Bonded warehouse" is the trade name. The legal name in Malaysia is licensed warehouse, or gudang berlesen in Malay. The Royal Malaysian Customs Department (JKDM) issues the licence under section 65 of the Customs Act 1967 for storing dutiable or taxable goods and other goods approved by the Director General. Customs says the duty and tax on warehoused goods are deferred until the goods are removed for local use or re-exported (JKDM introduction).
Two things make it "bonded". First, the operator lodges security with Customs in the form of a bank guarantee sized as a share of the duty at stake. Second, Customs keeps control of the stock. Under section 65(3) a senior customs officer may enter a licensed warehouse at any time, and under section 65(4), if dutiable stock is short, the licensee is presumed to have removed it illegally and must pay the duty, unless the Director General accepts that the loss came from unavoidable leakage, breakage or accident (Customs Act 1967).
The four kinds of licensed warehouse
| Category | Who can hold the licence | Whose goods it stores |
|---|---|---|
| Public licensed warehouse (GBA) | A Berhad or Sdn Bhd registered with SSM, with at least 30% bumiputera equity and at least 30% bumiputera directors or management | Goods of many customers: the usual third-party bonded store |
| Private licensed warehouse (GBP) | A company registered with SSM or the local authority | Only critical or approved goods owned by the licence holder |
| PEKEMA licensed warehouse | Certified PEKEMA members holding an open Approved Permit from MITI | PEKEMA members; the premises can be a building, showroom or fenced open land, with a MITI support letter |
| Port or airport GBA | Airlines, terminal operators, port operators and authorities | Only inside a port or airport, outside a free zone |
Source: JKDM licensing rules, last updated 27 August 2026.
How do goods move into and out of a bonded warehouse?
Section 66 of the Customs Act says imported goods, other than prohibited goods, must on arrival be deposited in a customs or licensed warehouse or another place approved by the Director General, unless the duty has been paid, the goods are approved for transit or transhipment, or another listed exception applies. So at the port you have a choice: pay the duty and tax now on the import declaration, or move the goods into bonded storage and pay later on what you actually release.
Step by step for an importer
- Classify the goods first. JKDM's import guide asks importers to confirm the tariff code and check whether the goods need an import permit from another agency before they ship (JKDM import guide).
- Book space with a licensed operator (or use your own licence) and confirm your goods fall within what that licence allows.
- On arrival, your customs agent declares the goods and they go into the licensed warehouse instead of being cleared with duty paid at the port.
- While stored, Customs allows warehousing, break bulk, repacking, relabelling, buying and selling, consolidation and entrepot trade, and the warehouse can serve as an international procurement centre, regional distribution centre or principal hub (JKDM list of activities).
- To take goods out, section 75 allows dutiable goods to leave customs control only after the duty is paid, for transit to another customs or licensed warehouse or approved place, or for re-export under the Director General's conditions.
- Watch the clock. Everything must be cleared within two years from deposit unless an extension is approved.
Which customs form covers which move
| Movement of goods | Customs form |
|---|---|
| Normal import, duty paid on arrival | Customs Form No. 1 (K1), filed electronically |
| Free zone into the principal customs area | K1 |
| Principal customs area into a free zone | Customs Form No. 2 (K2) |
| Free zone to a licensed warehouse, by land | Customs Form No. 8 (K8) |
| Licensed warehouse to a free zone, by land | K8 |
Sources: JKDM import guide and JKDM free zone form table. JKDM also tells importers to keep import records in Malaysia for seven years.
Bonded warehouse, free zone, LMW or ordinary warehouse: which fits your goods?
Free zones work differently. Under the Free Zones Act 1990, goods brought into, removed from or produced in a free zone are exempt from customs duty, excise duty and sales tax. The Customs Act treats a free zone as a place outside the principal customs area: goods moving from the rest of Malaysia into a free zone are treated as exported, and goods moving out of a free zone into Malaysia are treated as imported (JKDM: Free Zone introduction). Around Klang, JKDM's list names free commercial zones at Northport, Westport and Southport (zone authority: Port Klang Authority) and the Port Klang Free Zone, plus free industrial zones at PKFZ and Telok Panglima Garang (JKDM list of free zones).
| Ordinary warehouse | Bonded (licensed) warehouse | Free zone | LMW | |
|---|---|---|---|---|
| Law | Council approvals only | Customs Act section 65 | Free Zones Act 1990 | Customs Act section 65A |
| Duty and tax | Paid at import before the goods arrive | Deferred until release for local use; re-exports leave without local payment | Exempt while in the zone; due when goods enter the principal customs area | Import duty suspended and excise exempted on approved inputs; no sales tax on approved raw materials, components and machinery |
| Where | Any industrial premises | Any premises Customs approves | Only gazetted zones such as PKFZ, Northport, Westport, Southport | The licensed factory |
| Main use | Duty-paid or local goods | Storage, break bulk, repacking, trading, regional distribution | Trading and re-export (commercial zones); export manufacturing (industrial zones) | Export manufacturing, with an export share written into each licence |
LMW details come from JKDM's standard LMW licence conditions, which also say an LMW gets no suspension of anti-dumping or countervailing duty, export duty, levies or service tax.
A simple rule of thumb: if you import stock and sell it into Malaysia over several months, a bonded warehouse spreads your duty payments. If most of the stock is re-exported, compare a bonded warehouse with a free zone. If you make products for export, look at an LMW or a free industrial zone. If everything is duty-paid or local, an ordinary warehouse is simpler. FactoryHub's comparison of Westport, Northport and PKFZ covers the location side of that choice.
Should you rent bonded space or apply for your own licence?
Renting space in someone else's GBA is the fast route: the operator already holds the licence, the bank guarantee, the CCTV and the alarm, and you pay storage and handling. Getting your own licence makes sense when volumes are steady and large enough to clear Customs' thresholds.
| Requirement | Own GBP (your goods only) | Own GBA (public, third-party) |
|---|---|---|
| Company | Registered with SSM or the local authority | Berhad or Sdn Bhd; 30% bumiputera equity throughout the licence; 30% bumiputera directors or management |
| Paid-up capital | RM100,000 non-critical; RM150,000 critical or mixed | RM250,000 non-critical; RM1,000,000 critical or mixed |
| Goods stored a year | At least RM2,000,000 non-critical; RM5,000,000 critical or mixed | No minimum non-critical; RM3,500,000 critical or mixed |
| Minimum floor area | Not specified | 20,000 sq ft non-critical; 50,000 sq ft critical or mixed (stacking does not count) |
| Bank guarantee, new licence | 50% of estimated yearly duty | 10% of estimated yearly duty |
| Licence fee | RM2,400 for a private company | RM2,400 for a private company |
Source: JKDM licensing rules. Customs may relax GBP requirements where there is no GBA in the area, or for ship stores at a port without a GBA. Renewals must be filed 90 days before the licence expires.
How much space, rent and time should you plan for?
Space. The 20,000 sq ft minimum for a public bonded store rules out most terrace and semi-detached factories. In JPPH-registered tenancies for Klang and Port Klang, detached factory rent was RM1.22 psf/month, median monthly rent RM19,700 for about 15,090 sq ft (301 tenancies over 24 months to August 2026), so the typical registered detached unit is below the GBA minimum. In Pulau Indah, Westport and PIIP, detached factory rent was RM1.38 psf/month, median monthly rent RM33,700 for about 55,140 sq ft (10 tenancies). See Klang and Port Klang transaction prices and rents and Pulau Indah, Westport and PIIP prices and rents.
Time. New licence applications are considered at JKDM headquarters. Policy approval is given for six months, or a reasonable period of up to 12 months, and the licence is only issued once every condition is met. Registered factory tenancies in Klang and Port Klang typically run 24 months, so a standard two-year lease can lose much of its life to the approval stage. Ask for a longer term or a renewal option before you sign, and budget the stamp duty with the tenancy stamp duty calculator.
What will Customs ask for, and what must the lease allow?
Applications go to the Zone Operations Director or State Customs Director where the premises are, on Form JKDM No. 1. JKDM's new-licence checklist asks for:
- the council business licence and the company's registration documents and organisation chart
- the tenancy agreement or proof of ownership of the premises
- location, layout and elevation plans certified by a registered architect or engineer, three copies each
- the CFO, CCC or temporary permit for the building
- a list of likely customers, for a public warehouse
- an import licence for cigarettes and liquor, or an AP with MITI's support for vehicles, where relevant
Before the licence is issued, Customs checks that the building is strong and safe with a single main entrance and exit, is fenced, has CCTV that customs officers can access and an alarm monitored 24 hours, is not near flammable materials, keeps hazardous goods labelled and separated, and runs an electronic inventory system. Jason Low's guide on what the building needs before Customs will license it walks through those checks on a site visit.
For the lease, get the landlord's written consent for fencing, CCTV, alarm works and closing a second gate. Remember that Customs requires a fresh application if you move to another state or add premises on a lot separated by a river or public road, and it can cancel a licence that has been inactive for a year without good reason. Current options are on warehouses for rent in Klang and Port Klang.
Common mistakes with bonded storage
- Treating bonded as tax-free. Duty and tax are deferred, not waived. Goods released to the local market pay what is due at that point.
- Forgetting the two-year limit. Plan sales or re-exports so stock is cleared within two years, or apply for an extension early.
- Weak stock records. A shortage is presumed to be an illegal removal and the licensee pays the duty, so the electronic inventory must match the racks.
- Planning to process goods. Repacking and relabelling are allowed; manufacturing needs a section 65A licence.
- Renting the wrong building. Too small for the GBA minimum, no CCC or CFO, or two open gates that cannot be controlled.
- Mixing up free zone and bonded paperwork. Land moves between a free zone and a licensed warehouse go on K8, not on an ordinary import declaration.
This guide explains Customs rules in general terms and is not legal or tax advice. Confirm the treatment of your goods with JKDM or a licensed customs agent.
Frequently Asked Questions
What is a bonded warehouse?
A bonded warehouse is a warehouse licensed by Customs where imported goods can be stored with duty and tax deferred. In Malaysia it is called a licensed warehouse, or gudang berlesen, under section 65 of the Customs Act 1967. You pay the duty only on goods released for local use, and goods re-exported from the warehouse leave without that local payment.
What is a private bonded warehouse?
A private licensed warehouse (GBP) stores only goods owned by the licence holder, not other companies' goods. JKDM requires paid-up capital of at least RM100,000 for non-critical goods and at least RM2 million of goods stored a year. A new GBP lodges a bank guarantee of 50% of the estimated yearly duty.
What is bonded warehouse in Malay?
In Malay a bonded warehouse is called gudang berlesen, short form GB. A public one is gudang berlesen awam (GBA) and a private one is gudang berlesen persendirian (GBP). A licensed manufacturing warehouse is gudang pengilangan berlesen (GPB), better known as LMW.
How do I get a bonded warehouse licence in Malaysia?
Submit Form JKDM No. 1 with the Lampiran A checklist documents to the Zone Operations Director or State Customs Director where the premises are located. New applications are considered at JKDM headquarters, policy approval lasts six to 12 months, and the licence is issued once the building, security and bank guarantee conditions are met. The licence fee is RM2,400 for a private company.
How long can goods stay in a bonded warehouse in Malaysia?
Goods deposited in a licensed warehouse must be cleared within two years from the date of deposit. The Director General of Customs can approve a longer period. Ask for an extension before the two years run out rather than after.
Is a bonded warehouse the same as a free zone?
No. A bonded warehouse is a licensed building inside the principal customs area where duty is deferred. A free zone, such as PKFZ or the free commercial zones at Northport and Westport, is treated as outside the principal customs area, and goods there are exempt from duty and sales tax until they enter the rest of Malaysia.
Do I pay SST on goods kept in a bonded warehouse?
JKDM says the payment of duty and tax on warehoused goods is deferred until the goods are removed for local use or re-exported. When you release goods to the local market, the duty and tax due at that time are paid. Check the treatment of your specific goods with a licensed customs agent.
FactoryHub is dedicated to helping every client find the right factory or warehouse. If you need a warehouse in Klang, Port Klang, Westport or Pulau Indah that can meet Customs' size and security rules, call or WhatsApp Peter Tan (REN 12771) at 016-666 6872.
