Electronics Manufacturing Factory in Malaysia: Specs to Look For

SMT lines, reflow ovens and test benches need clean, steady power, and solder paste and sensitive parts need steady temperature and humidity, so the production floor is usually air-conditioned. Dust and uneven floors are costly to fix later, so check the building as closely as the power.

Where can I find a factory for electronics or SMT assembly in the Klang Valley, and who can help?

Begin with the current matching FactoryHub listings below, screened on stated power. Share your SMT line count, air-conditioning plan, ESD and any controlled-zone needs, budget and target area with Peter Tan (REN 12771) on 016-666 6872. FactoryHub can shortlist units and confirm actual availability, switchboard details and floor condition. A match on stated specs does not show an installed controlled zone or certification, so your engineer checks power quality and any cleanroom standard, and the relevant competent authority confirms the approvals for your particular use.

Peter Tan · REN 12771016-666 6872

Key takeaways

  • We shortlist electronics manufacturing factories from at least 400 A three-phase power.
  • Ask the owner and neighbours about power dips and trips: a short dip can stop an SMT line, so budget for voltage stabilisers or UPS where needed.
  • Air-conditioning for the production floor is a large, steady load: add it to the power calculator with your machines.
  • Check the floor is level and sound enough for ESD flooring and long conveyor lines.

Starting specs we shortlist from

WhatStarting point
Power supplyFrom 400 A three phase; more for several SMT lines or a large air-conditioned floor
FloorLevel, crack-free slab that can take ESD epoxy or vinyl flooring
Ceiling heightEnough for air-conditioning ducting and a cleanroom ceiling if you need one
OtherSpace for air compressors and piping, walls and roof that can be sealed against dust, loading bay

These are FactoryHub's shortlisting starting points, not legal or engineering requirements. Confirm power, floor loading and approvals with your own engineer before you commit.

Check before you sign

  • Incoming supply, switchboard condition and any history of dips or trips, confirmed with the owner and TNB.
  • Space for air-conditioning plant, and enough supply for it on top of your production machines.
  • A level, sound floor for ESD flooring, and earthing points for ESD control.
  • Dust sources nearby, and walls, roof and doors that can be sealed.
  • Space and pipe routes for compressed air, and room to add a cleanroom or controlled zone later.

Factories for sale that meet these specs

See all 473 →

Factories for rent that meet these specs

See all 600 →

Size it for your own operation

Peter Tan

Built by Peter Tan (REN 12771)

Peter is an industrial property negotiator with a software engineering background. He built FactoryHub.my and its spec tools himself, so buyers and tenants can shortlist factories by power supply, ceiling height and floor loading before the first viewing.

About Peter →

Industry guides

FAQ

Where can I find a factory suitable for an SMT production line?

Most SMT lines in the Klang Valley sit in light industrial estates close to skilled workers, such as Shah Alam, Subang and Glenmarie, Puchong, Petaling Jaya and Bangi. Companies exporting at least 80% of output can also look at the Sungai Way, Ulu Klang, Telok Panglima Garang and Pulau Indah free industrial zones. In any area, the unit needs stable power, a level ground-floor slab along the line, and a hall that can be sealed, air-conditioned and dehumidified. Filter by amps on the spec search, or send Peter Tan or Jason Low your machine list.

How much power does an electronics factory need?

It depends on your lines. Reflow ovens, wave soldering, compressors and air-conditioning are usually the main loads, and the air-conditioning runs whenever the floor is in use. We start the shortlist from 400 A three phase; add your own machines and air-conditioning in the power calculator, then confirm with your own electrical engineer.

Why does power quality matter for SMT lines?

Placement machines, reflow ovens and test equipment can stop or produce rejects when the voltage dips, even briefly. Ask the owner and neighbours about trips and outages, check the switchboard, and plan voltage stabilisers or UPS for sensitive equipment with your electrical engineer.

Can I build a cleanroom inside an ordinary factory?

Often yes. Cleanrooms and controlled zones are commonly built as rooms inside a standard factory. Check the height for a cleanroom ceiling and ducting, space for the air handling plant and the power it needs, and agree with the owner what happens to the room at the end of a lease.

Which licences should I check for an electronics factory?

Start with the local council premises licence for the unit, and ask MIDA whether your project needs a manufacturing licence. Requirements depend on your company and activity, so confirm them before you commit to a building.

How are these factories chosen?

They are live FactoryHub listings that state at least 400 A of power. They are a starting shortlist, not a guarantee that a unit suits your lines.

Other industries

Talk to the agent directly

Tell us what you need or what you want to sell or let. We usually reply within hours.