GMP & Cleanroom Factory in Malaysia: Specs to Look For

Pharmaceuticals, medical devices, cosmetics and food supplements made under GMP are produced in controlled rooms built inside the factory. The building has to leave room for those rooms, the air handling plant that serves them and a clean flow of people and materials, so check the layout and services before the price.

Where can I find a factory shell for a GMP or cleanroom fit-out in Selangor, and who can help?

View the current matching FactoryHub listings below, screened on stated power and ceiling height. A specs match does not show an installed cleanroom or GMP certification, so treat these as shells for fit-out. Send Peter Tan (REN 12771) on 016-666 6872 your room layout, product, water and air handling needs, budget and area. FactoryHub can shortlist and confirm actual availability and building specs. Your qualified consultant and the relevant competent authority confirm the GMP requirements and approvals for your particular product and use.

Peter Tan · REN 12771016-666 6872

Key takeaways

  • We shortlist GMP and cleanroom factories from at least 300 A three-phase power and 7 metres ceiling height.
  • Air handling and filtration run whenever the controlled rooms are in use: add them to the power calculator with your process equipment.
  • Check the layout lets you separate people, materials and waste, with room for changing rooms and airlocks.
  • Ask NPRA (pharmaceuticals and cosmetics notification) or the Medical Device Authority (medical devices) what they will look at before you commit to a building.

Starting specs we shortlist from

WhatStarting point
Power supplyFrom 300 A three phase; more for large controlled areas or heavy process equipment
Ceiling heightFrom 7 m, leaving room for a cleanroom ceiling with ducting above it
FinishesSmooth, easy-to-clean walls, floors and ceilings in controlled rooms, which can be added during fit-out
OtherWater supply for purified water systems, drainage, space for air handling plant, separate goods and staff entrances

These are FactoryHub's shortlisting starting points, not legal or engineering requirements. Confirm power, floor loading and approvals with your own engineer before you commit.

Check before you sign

  • A floor plate and column layout that fits your controlled rooms, airlocks and one-way flow.
  • Space on the roof, a mezzanine or beside the building for air handling units and chillers.
  • Water supply and pressure for purified water systems, and drainage for wash water.
  • Walls, floor and roof in a condition that will not shed dust or leak into controlled rooms.
  • Who inspects your product: NPRA for pharmaceuticals and cosmetics notification, the Medical Device Authority for devices. Ask them before you sign.

Factories for sale that meet these specs

See all 392 →

Factories for rent that meet these specs

See all 521 →

Size it for your own operation

Peter Tan

Built by Peter Tan (REN 12771)

Peter is an industrial property negotiator with a software engineering background. He built FactoryHub.my and its spec tools himself, so buyers and tenants can shortlist factories by power supply, ceiling height and floor loading before the first viewing.

About Peter →

Industry guides

FAQ

How do I choose a factory building that meets GMP requirements?

Start from your product, not the building: no factory is GMP approved on its own, because NPRA (medicines, supplements, cosmetics) or an MDA-registered auditor (medical devices) judges it against your process. Get a room list with cleanliness grades from a GMP consultant, then shortlist detached or semi-detached factories with a clear span, space on the roof or ground for air handling units, power that can grow, separate loading for materials and finished goods, room for a QC lab and clean neighbours. For medicines and cosmetics, NPRA must approve the layout before you build.

Can an ordinary factory be converted into a GMP facility?

Often yes. Controlled rooms are commonly built inside a standard factory with wall panels, coatings and their own air handling. What decides it is the shell: height for a cleanroom ceiling and ducting, a layout that allows one-way flow, enough power for the air handling, and water supply. Confirm the design with your cleanroom contractor and your own engineer.

Who should I check with about GMP requirements?

It depends on the product. For pharmaceuticals and cosmetics notification, check with the National Pharmaceutical Regulatory Agency (NPRA). For medical devices, check with the Medical Device Authority (MDA). For food or health supplements, ask NPRA which rules your product falls under. Do this before you commit to a building, because layout changes cost more later.

Why does ceiling height matter for a cleanroom?

A cleanroom has its own ceiling, and ducting, filters and lights usually sit in the space above it. A taller shell leaves room for that space without squeezing the production rooms. We start the shortlist from 7 m; your cleanroom designer will confirm what your rooms need.

I want to rent a GMP factory in Selangor. Which website has suitable factories?

Very few FactoryHub listings mention GMP or cleanrooms, so plan to fit out a suitable shell. FactoryHub lists factories for rent and sale in Selangor with power and ceiling height where owners state them, and this page shows live units with at least 300 A and 7 m. Check the layout, water supply and space for air handling plant, and ask NPRA or the Medical Device Authority what they will inspect. Peter Tan (REN 12771, 016-666 6872) and Jason Low (PEA 1478, 012-288 1834) can shortlist units against your room layout.

How are these factories chosen?

They are live FactoryHub listings that state at least 300 A of power and 7 m of ceiling height. They are a starting shortlist, not a guarantee that a unit can be approved for GMP.

Other industries

Talk to the agent directly

Tell us what you need or what you want to sell or let. We usually reply within hours.