Key Takeaways
- Once you have a buyer, the legal part of a factory sale usually takes about 3 to 6 months. One Malaysian law firm puts a sub-sale transfer with no issues at 3 to 4 months, 4 to 6 months when the seller's bank loan has to be redeemed, and more than 6 months when the title carries a restriction in interest or the documents have problems (Deidra Sharina & Co).
- Finding the buyer is the part nobody can time. There is no public statistic on how long factories stay on the market in Malaysia. The lever you control is a price set against registered deals, not against other asking prices.
- State consent is the most common extra step. In Selangor, a complete transfer consent decided by the Land Administrator takes 14 working days; one that goes to the Menteri Besar, such as a Bumiputera lot sold to a non-Bumiputera buyer, spends 14 working days at the district land office and 14 at the state land office before he decides (PTG Selangor).
- Fixed clocks start when the SPA is signed: instruments must be stamped within 30 days (LHDN) and the RPGT forms and the buyer's retention sum are due within 60 days of the disposal date (LHDN).
- What you prepare before listing saves the most time: a fresh title search, paid quit rent, the CCC or CF and approved plans, TNB supply details, a redemption statement from your bank and a site cleared of scheduled waste.
How long does it take to sell a factory in Malaysia, from start to finish?
A factory sale has two halves. The first half, from pricing to an accepted offer, depends on the market and on your price, and nobody can promise a date for it. The second half, from offer to handover, runs on contract terms and government processing times that are written down, so you can plan it. The table puts the stages in order with the time each one takes, where an official or written figure exists.
| Stage | What happens | How long |
|---|---|---|
| 1. Prepare and price | Title search, document pack, price set against registered deals | Your own pace; an official land search is valid for 1 month (PTG Selangor) |
| 2. Market until an offer | Viewings, the buyer checks power, height, loading and title | No public figure; depends on price, type and title |
| 3. Offer to SPA | Earnest deposit paid, SPA drafted by the lawyers | Commonly 14 to 21 days after the offer (market practice) |
| 4. State consent, if the title needs it | Consent to transfer, often together with consent to charge for the buyer's bank, applied through e-Tanah | 14 working days at Land Administrator level, longer at Menteri Besar level |
| 5. Stamping | SPA and transfer (Form 14A) stamped | Within 30 days of signing |
| 6. RPGT | Seller files CKHT 1A, buyer files CKHT 2A and remits the retention | Within 60 days after the disposal date |
| 7. Completion | Buyer's loan released, your loan redeemed, transfer registered | The completion period in the SPA, commonly three months from the SPA or from the date the last condition is met |
| 8. Handover | Keys and vacant possession, or the tenancy, handed over | On completion, as the SPA sets out |
The 14 to 21 days and the three month completion period are market practice, not law: the parties write their own dates into the offer and the SPA. Our factory SPA guide explains the completion clause and the extension that usually comes with it.
Put together, a clean sale of a factory on its own individual title, with a buyer who already has financing lined up, sits at the short end of the law firm's 3 to 6 month range. Each complication below pushes it towards the long end or beyond.
How long does it take to find a buyer for a factory?
No government body publishes how long industrial property takes to sell, so treat any single number you hear as an anecdote. What decides it is how your factory compares with what buyers can actually get, and the comparison starts with price.
Buyers and their banks look at registered deals. In JPPH-registered transactions in Klang and Port Klang over the 24 months to August 2026, terrace factories had a median price of RM850,000 (RM409 psf of land), semi-detached factories RM5 million (RM337 psf of land) and detached factories RM14.9 million (RM270 psf of land). Like-for-like (same park, same type), semi-detached factory prices rose 21% across 8 parks in the last 12 months against the 12 before, while detached factory prices fell 5% across 5 parks (Klang & Port Klang transaction prices and rents). Every psf figure is per sq ft of land, not built-up.
Why price decides the timeline
- An asking price far above the registered deals of the same park draws fewer viewings. Buyers can check the registered prices before they call.
- A buyer who needs a loan needs a bank valuation. If the valuation comes in below the agreed price, the buyer must find more cash, renegotiate or walk away, and you start again.
- Specification matters as much as price. Industrial buyers screen on TNB supply, ceiling height, floor loading, container access, land use category and tenure before they view. A factory that answers those questions in the listing gets serious buyers faster.
If you want a figure for your own factory, FactoryHub's sell your factory page gives an indicative benchmark against the area, and a formal valuation can be arranged through licensed valuers.
What happens between the offer and the SPA?
The buyer signs an offer and pays an earnest deposit, commonly 2% to 3% of the price. The lawyers then draft the Sale and Purchase Agreement (SPA), which is commonly signed 14 to 21 days later, when the deposit is topped up to 10%. Again, these are market practice, written into the offer, not rules.
Three things decide whether this stage runs on time:
- Who acts for whom. Appoint your lawyer as soon as the offer is signed, and send the title, your identity or company documents and the redemption statement immediately.
- The conditions precedent. If the SPA is conditional on state consent, on the buyer's loan or on anything else, the completion clock usually starts only when the last condition is met.
- What is in the sale. Agree in the offer whether cranes, transformers, racking and machinery stay, and whether the buyer takes the factory with vacant possession or with a tenant in place. Arguing about this after the offer costs weeks.
Use the legal fees calculator to estimate the legal fees and stamp duty on the price before you negotiate.
How long does state consent take for a factory sale?
Some industrial titles, leasehold land in particular, carry a restriction in interest (sekatan kepentingan) that requires the state's consent before the land can be transferred or charged. Your title states whether it has one. PTG Selangor's answers for this step are specific (PTG Selangor FAQ):
- Since 26 October 2024, every consent application in Selangor runs end to end on the e-Tanah system: documents, payment, status checks, queries and the decision letter. Applicants no longer need to go to the counter.
- A consent decided by the Land Administrator takes 14 working days once the documents are complete. The Klang district land office's client charter lists 14 days for a complete transfer consent, a charge consent, or a combined transfer and charge consent (Pejabat Daerah dan Tanah Klang).
- A consent decided by the Menteri Besar takes 14 working days at the district land office and 14 working days at PTG before it goes to him for consideration. Transfers from a Bumiputera owner to a non-Bumiputera buyer are in this group.
- Quit rent must be paid before the application is made.
- A query that is not answered within the time given is withdrawn automatically, and the applicant must apply and pay again.
- A consent letter stays valid for 3 years from approval.
Bumiputera lots, Malay reserve land and foreign buyers
For a Bumiputera to non-Bumiputera transfer, an advertisement offering the property to Bumiputera buyers is a compulsory item on the checklist. If the first application is refused, PTG suggests selling to a Bumiputera buyer or appealing with the documents required under the Director of Lands and Mines Instruction No. 2/2012. Land in a Malay reservation cannot be transferred to a non-Malay at all. A sale to a foreign buyer needs consent under section 433B of the National Land Code, decided in Selangor by the Director of PTG. Each of these narrows your buyer pool or adds a step, so know your status before you list. For leasehold land around Port Klang, Ms Teh's guide on remaining lease, renewal premium and consent explains how to read the title first.
Kuala Lumpur and Negeri Sembilan run their own land offices and procedures, so check the current times with the land office that holds your title.
Does consent change the RPGT dates?
It can. Under paragraph 16 of Schedule 2 of the Real Property Gains Tax Act 1976, when a disposal requires the approval of the Government or a State Government, the date of disposal is the date of that approval (RPGT Act 1976). Ask your lawyer which date applies to your sale, because the 60 day RPGT deadlines run from it.
What deadlines run after the SPA is signed?
Stamp duty: 30 days
Instruments must be stamped within 30 days of being signed in Malaysia. Late stamping costs RM50 or 10% of the deficient duty, whichever is higher, within 3 months after the deadline, and RM100 or 20% after that (LHDN). From 1 January 2027, transfers of real property that do not involve a JPPH valuation move to LHDN's stamp duty self-assessment system (LHDN).
RPGT: 60 days
The seller files Form CKHT 1A within 60 days after the disposal date, and since 1 January 2025 the form must be filed online through e-CKHT on MyTax. The buyer must retain 3%, 5% or 7% of the price, depending on the seller's category and holding period, and remit it to LHDN within 60 days; a buyer who fails pays an increase of 10% of the unpaid amount (LHDN). Have your purchase documents and the receipts for improvement costs ready so your lawyer or tax agent can file on time.
Completion and registration
On completion the buyer's bank releases the loan, your own bank is paid its redemption sum, and the transfer is presented at the land office. The registration itself is quick: the Klang land office's charter lists 24 hours to register a land transfer (Pejabat Daerah dan Tanah Klang). The waiting is in what comes before: the loan release, the redemption and the documents.
What slows a factory sale down?
| Cause | Why it adds time | What to do early |
|---|---|---|
| Price well above registered deals | Fewer offers; bank valuation below the agreed price | Price against the same park's registered deals |
| Title with a restriction in interest | Adds the consent step | Check the title now; pay quit rent; prepare consent documents |
| Bumiputera lot or Malay reserve land | Menteri Besar level consent, or no transfer to non-Malays at all | Confirm the status; advertise to Bumiputera buyers where required |
| Foreign buyer | Section 433B consent | Build it into the completion period |
| Your own bank loan | Redemption adds time (4 to 6 months against 3 to 4 in the law firm's estimate) | Ask your bank for a redemption statement before listing |
| No CCC or CF, or extensions without approval | Buyer's lawyer and bank raise queries | Gather the approvals; read our CCC guide |
| e-Tanah query left unanswered | Application withdrawn; apply and pay again | Have your lawyer watch the portal |
| Scheduled waste and machinery on site | You cannot hand over a clean factory | Clear waste and plan machinery removal early |
| Tenant in place | SPA must deal with the tenancy or vacant possession | Agree it in the offer |
What can a factory owner prepare before listing?
- Title and a fresh official search. Confirm the owner's name, tenure, years left on a lease, land use category, express conditions, any restriction in interest and any charge or caveat. An official search is valid for one month, so order a new one close to the offer.
- Quit rent and assessment receipts. Quit rent must be paid before a consent application, and buyers will ask for both.
- Building approvals. The CCC or CF, approved building plans and Bomba approvals, plus approvals for every extension.
- Power details. Recent TNB bills and the supply rating, since industrial buyers screen on amperage first.
- A redemption statement if the factory is charged to a bank.
- A clean site. Under the Environmental Quality (Scheduled Wastes) Regulations 2005, scheduled waste may be stored on site for 180 days or less and up to 20 tonnes unless the Department of Environment approves more (DOE). Arrange collection before handover, not after.
- A fixtures list. Which cranes, transformers, racking and machines stay, and which you will remove before completion.
- Tenancy papers if the factory is let: the agreement, deposits held and the expiry date.
- Company papers if the factory sits in a company: board resolution and directors' details. Selling the company's shares instead of the factory is a different process with its own stamp duty.
How is selling a factory different from selling a house?
The land office steps are the same, but almost everything around them is heavier. Buyers are fewer and are often companies that need board approval and a commercial loan. They check power, ceiling height, floor loading and permitted use before they talk about price. Some industrial titles carry consent restrictions. And the seller has to empty a working site: machinery, stock and scheduled waste do not leave in a weekend, so plan the move out of the factory alongside the sale.
Frequently Asked Questions
How long does it take to sell a factory in Malaysia?
Finding the buyer has no fixed time and depends mostly on how your price compares with registered deals. Once the buyer has signed, one Malaysian law firm puts a sub-sale transfer at 3 to 4 months with no issues, 4 to 6 months when the seller's loan must be redeemed and more than 6 months when the title needs consent or documents are missing. Plan for the long end if your title carries a restriction in interest.
How long does state consent take for a factory in Selangor?
PTG Selangor says a complete application decided by the Land Administrator takes 14 working days. An application decided by the Menteri Besar, such as a Bumiputera to non-Bumiputera transfer, spends 14 working days at the district land office and 14 at PTG before it goes to him. Quit rent must be paid first, and the approval letter is valid for 3 years.
How long does the SPA completion period last?
There is no statutory period for a sub-sale factory: the parties agree it in the SPA. Commonly it is three months from the SPA or from the date the last condition is met, often with an extension at late payment interest if the agreement allows one. Read the clause before you sign, because it decides when you get the balance.
Can foreigners buy a factory in Malaysia?
Yes, but a transfer to a foreign buyer needs the state's consent under section 433B of the National Land Code. In Selangor this application is decided by the Director of the state land office (PTG). Expect that consent to add time to the sale.
Can I sell a factory that still has a bank loan?
Yes. Your bank issues a redemption statement, the buyer's financier pays the redemption sum on completion and your bank releases the title. One law firm estimates this lengthens a sub-sale to about 4 to 6 months, so ask your bank for the statement before you list.
When must RPGT be settled when I sell a factory?
The seller files Form CKHT 1A online within 60 days after the disposal date. The buyer retains 3%, 5% or 7% of the price, depending on the seller's category, and remits it to LHDN within the same 60 days. When the sale needs State Government approval, the RPGT Act treats the approval date as the disposal date.
Can I sell a factory with a tenant inside?
Yes. The SPA must state whether the buyer takes the factory subject to the tenancy or with vacant possession, and how the deposits are handed over. Settle this in the offer, because it changes who can buy: an owner-occupier usually needs vacant possession, an investor may want the tenant.
This guide is general information, not legal or tax advice. Confirm the details of your own sale with your lawyer and tax agent.
FactoryHub is dedicated to helping every client find the right factory or warehouse. To sell a factory or industrial land in Klang and the rest of Selangor, contact Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.
