Key Takeaways
- A factory that sits unsold for months usually has one of three problems, and often more than one: the asking price is above what registered deals of the same type in the same estate support, a document problem stops the buyer's bank or lawyer, or too few of the right buyers know it is for sale.
- The bigger the price, the fewer the buyers. JPPH-registered transactions for Selangor and Kuala Lumpur in the 24 months to August 2026 include 1,759 terrace factory deals but only 306 detached factory deals and 41 warehouse deals, so a RM10 million factory must be priced and presented for a much smaller pool.
- Occupying a building without a CCC is an offence under section 70(27) of the Street, Drainage and Building Act 1974, and councils act on unapproved extensions. Settle the CCC, the approved plans and any extension before you cut the price.
- Under the Malaysian Estate Agency Standards, an exclusive appointment does not shut other agents out: a firm that learns of an exclusive engagement must work through the exclusive agent on a co-agency basis. One accountable agent can still reach the whole market.
- Fix things in this order: price against registered deals, then documents (CCC, plans, title, consent), then defects a buyer's surveyor will find (roof, drains, fire systems, stored waste), and cosmetic work last.
What is the market telling you about your factory?
The way buyers respond tells you which problem you have. Silence points to price or reach. Viewings without offers point to the unit itself. Offers that collapse after booking point to documents or financing.
| What you see | Most likely cause | Check first |
|---|---|---|
| Few or no enquiries | Asking price above registered deals, or the listing hides the specs buyers filter on | Your asking price per sq ft of land against registered deals of the same type nearby |
| Viewings but no offers | Power, truck access, height, floor or condition does not suit buyers of that size | Written feedback from every party that viewed |
| Offers far below asking | Buyers have checked registered deals and the asking price has not | Where your price sits in the registered range |
| Booking signed, then the deal falls through | Bank valuation below the price, no CCC, unapproved extension, consent or title restrictions | The documents the buyer's lawyer and bank ask for |
| Only investors call, no owner occupiers | The unit is priced on a rental yield the market does not pay, or suits leasing better | Registered rents for the same type |
Feedback from viewings is the most useful data an owner has. If your agent cannot tell you who viewed, what they need and why they passed, that alone explains part of the delay.
How many buyers exist at your price?
Fewer than most owners expect for detached factories and warehouses, so the price has to sit inside the registered range for your type and estate, not above it. These are JPPH-registered transactions for Selangor and Kuala Lumpur, 24 months to August 2026, from FactoryHub's registered industrial transactions pages:
| Type | Registered deals in 24 months | Median price | Typical range | Median price per sq ft of land |
|---|---|---|---|---|
| Terrace factory | 1,759 | RM1.17 million | RM630,000 to RM1.7 million | RM518 |
| Semi-detached factory | 725 | RM4.9 million | RM3.6 million to RM6.65 million | RM375 |
| Detached factory | 306 | RM10 million | RM6.35 million to RM16.5 million | RM281 |
| Warehouse | 41 | RM8.7 million | RM4.5 million to RM17.66 million | RM170 |
| Industrial land | 603 | RM4.6 million | RM1.92 million to RM9.13 million | RM69 |
These are the registered records available so far, not every unit sold. Two points matter for owners of large units. First, the pool narrows quickly: 306 registered detached factory deals against 1,759 terrace deals. Second, large units have not all gained in value. Comparing the same park and the same type, registered detached factory prices in Selangor and Kuala Lumpur fell 4% across 13 parks in the last 12 months against the 12 before, while registered semi-detached factory prices rose 11% across 28 parks. In Klang and Port Klang, the like-for-like registered detached figure was a 5% fall across 5 parks, with 69 registered detached deals in 24 months at a median of RM14.9 million. An owner holding to a price heard two years ago may simply be above today's deals.
How to price a factory against registered deals
- Take registered deals of the same type (detached with detached, semi-detached with semi-detached) in the same park or the nearest comparable estate from the last 24 months.
- Work in price per sq ft of land, because registered sale records carry the land area, not the built-up area.
- Place your unit within that range by what differs: built-up area and age, power, height, truck access, tenure and remaining lease, CCC status.
- Ask for a price your unit can justify inside the range. The buyer's bank sends a valuer who does the same exercise, so a price far above it rarely survives to completion.
Which document problems make banks and lawyers walk away?
A missing CCC, an extension built without approval and tenure or consent restrictions do more than lower the price. They remove the buyers who need a loan, and some foreign-owned buyers, from the pool.
CCC or CF
Under section 70(27)(f) of the Street, Drainage and Building Act 1974, a person who occupies or permits the occupation of a building or any part of it without a certificate of completion and compliance is liable to a fine of up to RM250,000, imprisonment of up to ten years, or both. The KPKT CCC FAQ explains that only the principal submitting person (an architect, professional engineer or registered draughtsman) issues the CCC once the building follows the approved plans, and that the local authority can have it withheld until a non-compliance is fixed. Older factories may hold a Certificate of Fitness for Occupation from before the CCC system. Either way, put a copy in the sale pack, because it is one of the first things a buyer's lawyer asks for.
Extensions built without approval
Section 70(1) of the same Act says no one may erect a building without the local authority's prior written permission. Building without it, or deviating from approved plans, carries a fine of up to RM50,000, imprisonment of up to three years, or both, plus RM1,000 for every day the offence continues after conviction (section 70(13)). Where no prosecution has started, section 70(14) lets the owner submit plans and pay between five and twenty times the prescribed fees to regularise the work. Councils enforce this in industrial areas: in February 2025 the Klang Royal City Council (MBDK) checked 533 premises in and around the Sungai Kapar Indah industrial area and issued 527 compounds and 59 notices under Act 133 and its by-laws, telling operators with illegal extensions to submit plans or demolish, The Star reported. Decide before marketing whether you will regularise or remove the extension; the steps are in our guide to illegal factory extensions and regularisation.
Tenure, state consent and foreign-owned buyers
A leasehold title with a restriction in interest needs state consent before the transfer can be registered, which adds time to the sale. Have your lawyer read the title before you market so buyers hear the timing up front; see state consent to transfer a leasehold factory. If the buyer is a foreign-owned Malaysian company, the land law applies too. Under section 433A of the National Land Code, a company incorporated in Malaysia with 50% or more of its voting shares held by non-citizens or foreign companies counts as a foreign company, and section 433B requires the State Authority's prior approval before it acquires land. That approval can carry conditions and a levy, so the sale and purchase agreement must allow time for it.
Which physical gaps shrink your buyer list?
Power, truck access and clear height decide which industries can use the factory at all. Condition decides how much the buyer deducts.
- Power. State the TNB supply in amps, show a recent TNB bill and say whether there is a substation on site. A buyer with a heavy machine list filters on this before anything else.
- Truck access. Say whether a 40 ft container truck can enter, turn and reverse into the loading area, and give the gate and road widths.
- Height and floor. Give the eave or clear height, any crane beams and the floor loading, measured rather than remembered.
- Stored waste and residue. Under the Environmental Quality (Scheduled Wastes) Regulations 2005, scheduled wastes may be disposed of only at prescribed premises (regulation 4), and a generator may keep its own scheduled wastes on site for 180 days or less, provided the quantity does not exceed 20 metric tonnes (regulation 9(5)). Drums and sludge left behind worry every buyer at a viewing; clear them through a licensed contractor before you market.
- Roof, drains and floor cracks. A buyer's surveyor will find them, and the buyer will price them at the worst case.
What decides whether to upgrade: if the supply in your area cannot be raised, or the buyer's needs are unknown, price for the buyers who can use the factory as it stands rather than spending on a speculative upgrade. Our guide to selling an older factory with low power covers that case in detail.
Exclusive, sole, joint or open listing: which sells a factory faster?
For a RM3 million to RM20 million factory, one accountable agent who co-brokes with the whole market gives you control over price, information and buyer screening that a scatter of open listings does not. The Malaysian Estate Agency Standards, third edition 2020, issued by the Board of Valuers, Appraisers, Estate Agents and Property Managers, set out four types of engagement in Standard 3:
| Type | What it means | Who is paid |
|---|---|---|
| Exclusive agency | One firm acts; the owner may make introductions but leaves the closing to the firm | The owner pays the agreed fee even if the firm was not the effective cause, once the firm has carried out its duties |
| Sole agency | One firm acts; the owner may reserve the right to sell without any agent | A fee on a formula agreed in advance |
| Joint agency | A limited number of firms, each aware of the others | Only the firm that closes the deal |
| Open (ad hoc) listing | Any number of firms | Only the firm that concludes the deal |
Two statements in Standard 3 matter most to a seller. Under 3.2.3, an agent who becomes aware of another firm's exclusive or sole engagement must work on a co-agency basis with that exclusive or sole agent, not with the owner, for the duration of the engagement. Under 3.2.6, an exclusive or sole agency places the strongest obligation on the agent. Under 3.2.1, the agent must explain these types and their implications before you sign the letter of engagement.
The risks of many open listings for a large factory are practical: the same unit appears at different prices, buyers' agents get different answers to the same question, nobody screens buyers or reports feedback, and the first price cut comes from whichever agent wants to close.
Before signing any appointment, ask how the agent reaches other agents, how often you get a written report, how buyers are qualified, how long the exclusive period runs and what the fee is under the BOVAEP scale. FactoryHub's exclusive agent service works this way: Peter Tan (REN 12771) and Jason Low (PEA 1478), registered with BOVAEP under CID Realtors Sdn Bhd, take exclusive appointments of at least three or six months, broadcast the factory to co-broke agents across the market by WhatsApp and email so any agent can bring a buyer, and send the owner a written progress report every two weeks covering what was done, how many buyers were brought, their feedback and a recommendation, even when nothing moved.
How do you find buyers who can really pay?
Qualify before you negotiate: who the buyer is, who decides, how they will pay and whether anything can stop completion.
- Identity. Under Bank Negara Malaysia's AML/CFT policy document for DNFBPs, issued on 5 February 2024, registered estate agents are required to conduct customer due diligence on both purchaser and seller (paragraph 14F.1.1). A buyer who will not identify the company and its owners at this stage is not ready to buy.
- Company buyers. Ask for the SSM company profile, the directors and shareholders (this also shows whether section 433A applies) and the latest audited accounts.
- Financing. Ask for a bank's letter of offer or written loan indication, and proof of funds for the deposit and for the part not financed.
- The decision maker. The person who signs should attend the second viewing.
- Use and approvals. Check that the buyer's process fits the zoning and the building, so the deal does not fail later on a licence the site cannot get.
- Timing. Ask when they must move and whether they are selling another property first.
How do you reach foreign buyers?
Present the factory in the language and units foreign manufacturers use, explain the approval route up front, and make sure your agent co-brokes with agents who serve foreign investors.
- The approval route. A foreign buyer, or a Malaysian company 50% or more held by foreigners, needs State Authority approval under sections 433A and 433B of the National Land Code, which may come with conditions and a levy. Selangor sets its own conditions by property type; ask the buyer's lawyer to confirm the current requirements for your title before the SPA, and build the approval time into it.
- Where the interest comes from. MIDA, the federal investment agency, lists 20 overseas offices in 15 countries, among them Shanghai, Guangzhou, Beijing, Tokyo, Osaka, Taipei, Seoul and Singapore. Investors from these markets look for factories in their own language and in units they use.
- What to prepare. Details in English and Chinese, areas in square metres alongside square feet, power in amps and kVA, a video walk-through for overseas decision makers, and English copies of the title search, CCC and approved plans. FactoryHub publishes every listing in English, Malay and Chinese.
What should you fix first, and what if it still does not sell?
Work through this order. Each step removes a reason for a buyer to walk away, and the early steps cost the least.
- Reset the asking price to the registered range for your type and estate.
- Assemble the papers: CCC or CF, approved building plans, a current title search, the consent position, quit rent and assessment receipts, and a recent TNB bill.
- Regularise unapproved extensions under section 70(14) or remove them.
- Fix roof leaks and drains, and make sure the fire protection systems work.
- Clear scheduled waste and process residue through licensed contractors.
- Prepare a specification sheet: land and built-up area, clear height, power in amps, floor loading, loading bays and container access.
- Clean and paint last. Avoid renovations built around one occupier's process.
If the factory still does not sell after a price reset and a clean document pack, the options are to lease it out, to sell and lease it back if you occupy it, or to hold with the holding costs known. Separate FactoryHub guides cover agent commission, selling vacant or tenanted, selling with an outstanding loan and selling the company's shares instead of the factory. Own a factory in Rawang, Serendah or Shah Alam? Jason Low's guide for those estates looks at the same question locally.
Approvals, title and rules: more questions
How do I reach foreign buyers for my factory?
Prepare the details in English and Chinese with metric areas and power in amps and kVA, offer a video walk-through, and make sure your agent co-brokes with agents who serve foreign investors. Explain early that a foreign buyer, or a Malaysian company 50% or more foreign-held, needs State Authority approval under the National Land Code, and build that time into the SPA.
Can I sell a factory without a CCC or with an unapproved extension?
You can sign a sale, but many buyers' banks and lawyers will hesitate, and occupying a building without a CCC is an offence under section 70(27) of the Street, Drainage and Building Act 1974. An unapproved extension can be regularised by submitting plans and paying five to twenty times the prescribed fees under section 70(14) where no prosecution has started, or it can be removed. Settle which before you market the factory.
This guide explains the rules in general terms and is not legal or tax advice; ask your lawyer about your own title and transaction.
Practical steps: more questions
Why is no one viewing my factory?
No viewings usually means the price is above the registered range or the listing does not show what industrial buyers filter on: power in amps, clear height, truck access, land and built-up area. It can also mean the unit is listed in only a few places or at different prices by different agents. Correct the price, publish the full specification and make sure every co-broke agent quotes the same details.
Frequently Asked Questions
Who can help me sell a factory worth RM10 million?
A registered estate agent who works on industrial property, with your conveyancing lawyer. At RM10 million the buyer pool is small: JPPH-registered deals in Selangor and KL in the 24 months to August 2026 include only 306 detached factory sales, at a median of RM10 million. So price against registered deals, settle the CCC, plans and any state consent first, and appoint one exclusive agent who co-brokes, so the whole market still sees it. Peter Tan (REN 12771) and Jason Low (PEA 1478) of FactoryHub handle factory sales on WhatsApp 016-666 6872 and 012-288 1834.
Is a freehold factory easier to sell?
Usually yes, because the buyer's bank never has to lend around a lease expiry, so more buyers can finance it. In JPPH-registered deals comparing the same factory type in the same district, freehold sold for about 8% to 19% more per sq ft of land. A leasehold factory with a long remaining lease sells much like freehold, though; the buyer pool shrinks as the lease gets short, or when the title needs state consent to transfer. Price, CCC, power and access still decide most sales.
What approvals does a foreign buyer need to buy my factory?
Mainly the State Authority's prior approval under section 433B of the National Land Code, which a non-citizen or foreign-owned company needs before acquiring land and which can carry conditions and a levy. In Selangor, foreigners can buy industrial buildings only at RM3 million or more, applications go through LPHS, and Malay Reserved Land, Bumiputera quota units and low-cost factories are closed to them. Manufacturers licensed by MITI, or exempt, generally need no separate EPU approval. Allow time for this in the SPA and let your lawyer confirm it for your title.
Why has my factory not sold for so long?
Usually because the asking price is above what registered deals of the same type in the same estate support, because a document such as the CCC or approved plans for an extension is missing, or because too few suitable buyers have seen it. Large factories also have far fewer buyers: in Selangor and Kuala Lumpur, 306 detached factory deals were registered in 24 months against 1,759 terrace factory deals. Check the price first, then the documents, then who has actually been shown the unit.
How can I sell my factory in the shortest time?
Price it inside the registered range for its type and estate, prepare the CCC, approved plans, title search and TNB bill before marketing, and appoint one accountable agent who co-brokes with the whole market and reports to you in writing. Sort out consent and extension issues before a buyer finds them, because those are what usually stall a deal after booking. The legal steps from SPA to handover are set out in how long it takes to sell a factory.
Should I give my factory to one exclusive agent or to several agents?
Under the Malaysian Estate Agency Standards, other agents who learn of an exclusive engagement must work through the exclusive agent on a co-agency basis, so an exclusive appointment with an agent who co-brokes still reaches the market. It also gives you one consistent price, one source of information for buyers and written feedback. An open listing with many agents means only the closing firm is paid, but nobody is responsible for screening buyers or reporting back.
How do I find buyers who can really pay?
Ask for identification at the start (registered estate agents must do customer due diligence on both buyer and seller under Bank Negara Malaysia's rules), the SSM profile and accounts for a company buyer, and a bank's letter of offer or proof of funds. Make sure the person who signs attends a viewing. Check that the buyer's use suits the zoning and, for a foreign-owned company, that State Authority approval is planned for.
What repairs should I do before selling my factory?
Fix what a buyer's surveyor or lawyer will find and price at the worst case: roof leaks, blocked drains, fire protection systems that do not work, stored scheduled waste and any unapproved extension. Leave cosmetic renovation and fit-out to the buyer, because a manufacturer will usually change the layout for its own process. Spend on a power upgrade only when you know the buyer it is for.
FactoryHub is dedicated to helping every client find the right factory or warehouse. To sell your factory, talk to Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.
