Key Takeaways

  • Yes, you can sell a factory that still has a bank loan or a charge on the title. The buyer, or the buyer's bank, pays your bank the redemption sum out of the balance of the price, your bank signs the discharge and releases the title, and the buyer receives it free of your charge (Malaysian Bar).
  • If you owe the bank more than the balance of the price, you top up the difference before completion. Your bank releases its security only against the full redemption sum.
  • The money reaches you in stages. A 10% deposit is commonly paid when the SPA is signed, and the buyer retains 3%, 5% or 7% of the price for RPGT. The balance is commonly due within 3 months plus a 1 month extension. What is left after your loan is paid usually sits with your lawyer as stakeholder until the transfer is registered and vacant possession is delivered.
  • A lock-in penalty comes from your letter of offer, not from the law. OCBC publishes a fee of 2% of the facility limit for a commercial property loan settled during its lock-in, and a Hong Leong Islamic business financing sheet shows a 36 month lock-in. Islamic banks may only recover actual costs, never lost profit (BNM).
  • A factory loan is rarely one simple term loan. When the factory also secures an overdraft or trade lines, the redemption figure can cover them too, and Bank Negara's 2 working day turnaround for redemption statements is written for housing loans. Ask your bank for the full figure before you accept an offer.

Can you sell a factory that still has a bank loan or a charge?

Yes. A charge on the title does not stop a sale; it decides how the money moves. Most factories bought with a loan are charged to the bank, and the bank keeps the original title until the loan is settled.

The Malaysian Bar's consumer guide to buying and selling property describes the usual sub-sale arrangement: when the property is charged or assigned to a financier at the time of sale, the buyer or the buyer's financier commonly pays the amount required to redeem it out of the balance of the purchase price, and if that amount is more than the balance, the seller must top it up (Malaysian Bar, Buying and Selling a House). The same guide notes that a sub-sale SPA has no prescribed form, so for a factory the parties write these steps into their own agreement. Our factory SPA guide covers the clauses.

What changes the paperwork is how your bank holds its security.

Charge on the title or assignment: which one does your factory have?

Your situation The bank's security How it is released Registered where
Individual or strata title issued, charge registered A charge under the National Land Code The bank signs a discharge of charge in Form 16N At the land office; the discharge takes effect when registered
No separate title yet (unit still under a master title) An assignment of your rights to the bank A Deed of Receipt and Reassignment No land office registration

Section 278 of the National Land Code lets a chargee discharge the land by an instrument in Form 16N, and the discharge takes effect from the date the instrument is registered (National Land Code, Act 828). Where no separate title has been issued, the bank releases its security through a Deed of Receipt and Reassignment and the land office is not involved (Misyail Othman & Co).

In Selangor, the state land office lists what it needs to register a discharge: the original issue document of title, a completed Form 16N, the current year's quit rent and assessment receipts, and the duplicate charge (PTG Selangor). Your bank holds the title and the duplicate charge. Your part is to have quit rent and assessment paid up.

When a company owns the factory

Two company law steps sit on top of the land office work:

  1. Shareholders' approval for a substantial disposal. Under section 223 of the Companies Act 2016, directors may not dispose of a substantial portion of the company's undertaking or property without a resolution of the company. For an unlisted company, substantial means more than 25% of total assets, of net profit or of issued share capital, whichever is highest (Companies Act 2016). A factory is often the company's main asset, so involve your company secretary before the SPA.
  2. The SSM register of charges. Once the secured debt is paid or the property is released, the company must lodge the particulars with the Registrar within 14 days. SSM's guideline asks for a memorandum of satisfaction or release, evidence of it and a statutory declaration, with a fee of RM50 for a local company (SSM).

What is a redemption statement and how do you get one?

A redemption statement, also called a redemption letter, is the bank's official statement of the total you must pay to settle the facility in full. The borrower can request it, or the borrower's solicitor can request it with a letter of authorisation signed by the borrower (CIMB).

It usually states the amount needed to settle on a given date or within a given period, a daily rate after a certain date, payment instructions and account references, and the documents and undertakings the bank requires (ASCO Law). It also expires: if the redemption sum is not paid within the time given, a fresh statement is needed.

How long the bank takes, and why a factory can take longer

Bank Negara Malaysia requires banks to issue a redemption statement for a housing loan or home financing within 2 working days of the instruction, and to release the original title within 5 working days of receiving the redemption sum, in non-complex cases (BNM policy document, 26 February 2020). BNM's examples of a non-complex case include a performing account and a property that is not used as collateral for other loan or financing facilities.

That is the gap for factory owners. A factory loan is business financing, and business property packages often bundle several facilities. Maybank's SME Property and Business Financing combines a term loan with an overdraft and trade lines such as letters of credit, trust receipts and bank guarantees (Maybank). CIMB's SME Biz Property Financing offers a margin of up to 150% for property and working capital, for industrial as well as commercial property (CIMB). If your factory secures facilities like these, there is no fixed BNM turnaround, and the redemption figure may have to cover every facility the charge secures.

What to ask your bank before you accept an offer

  • A provisional redemption figure with the daily rate, so you can work out your net proceeds.
  • Every facility the charge secures (term loan, overdraft, trade lines) and whether the bank will release this factory on its own. Under section 278, a charge over several lands can be discharged for all or any of them.
  • The end date of your lock-in and the early settlement fee, if any.
  • Any notice period for early settlement.
  • Whether the directors' personal guarantees for those facilities will be released. Section 278(2) says a discharge does not by itself release the chargor's personal liability unless it expressly says so.
  • The bank's own turnaround for the statement and for releasing the title.

How is the bank paid from the sale?

The money moves in a fixed order, and the banks and lawyers rely on each other's undertakings at each step.

  1. SPA signed. A sum equal to 10% of the price is commonly paid on signing (Malaysian Bar).
  2. RPGT retention. The buyer must retain 3%, 5% or 7% of the price, depending on your category, and remit it to LHDN within 60 days after the disposal date (LHDN). The Bar's guide notes the sum is typically retained from the deposit.
  3. Redemption statement. Your lawyer obtains it and sends it to the buyer's lawyer and bank.
  4. Differential sum. If the buyer's loan is smaller than the balance of the price, the buyer pays the difference before the buyer's bank releases its money (ASCO Law).
  5. Redemption. Out of the balance of the price, your bank receives the redemption sum.
  6. Discharge and transfer. Your bank signs Form 16N and releases the title, and the discharge and the transfer to the buyer are registered.
  7. Your surplus. The rest of the balance is typically paid to your lawyer as stakeholder and released to you only after an agreed period and after possession is delivered to the buyer.

Where each part of the price goes

Part of the price When Who receives it
Deposit, commonly 10% On signing the SPA You, less the RPGT retention; your SPA states who holds it
RPGT retention of 3%, 5% or 7% Remitted within 60 days after the disposal date LHDN, counted towards your RPGT
Balance, commonly 90% Within the completion period Your bank first, up to the redemption sum
Surplus after redemption After an agreed period, registration and vacant possession You, through your lawyer as stakeholder
Shortfall, if the loan exceeds the balance Before completion You pay it to your bank

The retention is not lost money. LHDN applies the amount remitted to all or part of the tax on your gain, and a disposer who overpaid can claim a refund within five years after the end of the year of assessment (LHDN operational guideline 2/2026). Our RPGT guide explains how the tax itself is worked out.

What if the factory sells for less than the loan?

Then you fund the shortfall. The Bar's guide is direct: if the amount needed to redeem is more than the balance of the price, the seller must top it up, and the bank will not release its security without full settlement. Compare your redemption figure with what similar factories have actually sold for before you fix an asking price. Registered deals for Klang and Port Klang are on our transaction prices page. If the top-up cannot be found, the sale cannot complete.

Coins and documents flowing from a factory to a bank, with keys and an open padlock coming back
IllustrationCoins and documents flowing from a factory to a bank, with keys and an open padlock coming back

How much is the lock-in penalty when you sell a factory early?

No law sets one. It comes from your facility. BNM requires banks to tell customers of any lock-in period, the early settlement charges payable if the loan ends before the lock-in expires, how those charges are calculated and when they are due, and any rebate for early settlement (BNM Product Transparency and Disclosure). BNM's disclosure template expresses the fee as a percentage of either the outstanding amount or the original loan amount, so read which one your bank uses.

What banks' own published documents show:

Bank and product Published lock-in and early settlement terms
OCBC Commercial Property Loan A fee of 2% of the facility limit may apply if the loan is fully settled during the lock-in; the lock-in is set in the letter of offer (OCBC)
Maybank SME Property and Business Financing Lock-in and exit penalty apply to conventional loans, not to Islamic financing (Maybank)
Hong Leong Islamic Property Financing-i, business (sheet dated May 2020) 36 month lock-in from first release; the early settlement rebate is the unearned profit less any fee within the lock-in (HLISB)
AmBank Housing Loan and Property Loan Lock-in of 3 years (conventional) or 2 years (Islamic) from first disbursement; the 2% fee on outstanding principal is not imposed from 3 January 2025 until further notice (AmBank)

Islamic financing: what the bank can and cannot charge

BNM's ibra' guideline requires Islamic banks to grant a rebate (ibra') to every customer who settles sale-based financing before the end of the tenure. During the lock-in they may not claim penalty charges; any charge must be a reasonable estimate of costs the bank actually incurred and must exclude the profit it would have earned (BNM Guidelines on Ibra').

What decides your figure

  • The first disbursement date. The lock-in usually runs from it. A refinance is a new facility, so check whether it started a fresh lock-in.
  • Conventional or Islamic. The ibra' rules above apply only to Islamic financing.
  • The base of the fee. Facility limit, original amount or outstanding balance give very different numbers on a large loan.
  • Notice. Some facilities need written notice; AmBank Islamic's property financing sheet asks for at least one month (AmBank Islamic). Send yours as soon as the SPA is signed.

How long from signing the SPA to receiving the full price?

In a sub-sale, the buyer is usually given 3 months to pay the balance, with a 1 month extension at 8% a year calculated daily. On a title without a restriction on transfer, the 3 months run from the SPA date. On a title with a restriction, they run from the date the buyer's solicitor receives the state's consent, which the Bar's guide puts at about 3 months, varying by state (Malaysian Bar). These are common practice; your SPA decides.

Milestone Timing What you receive
SPA signed Day 0 The deposit, less the RPGT retention
RPGT Returns and retention within 60 days after the disposal date; any tax balance within 90 days of disposal (LHDN) Nothing; the retention goes to LHDN
State consent, restricted titles only About 3 months, varies by state The completion clock starts
Completion 3 months, plus 1 month if the extension is used Your bank receives the redemption sum
Title released by your bank Within 5 working days of the redemption sum in BNM's non-complex cases; ask your bank for a business facility
Registration The Klang land office charter lists 24 hours to register a land transfer (Klang land office)
Stakeholder release After the agreed period and vacant possession The surplus

So on an unrestricted title with a straightforward loan, you can expect the price in full around the 3 to 4 month mark plus the stakeholder period. A restricted title adds the consent period in front. For the stages before the SPA, read how long it takes to sell a factory; for consent, read state consent for leasehold factories.

Should you keep paying the instalments after signing?

Yes, until your bank has received the redemption sum. The figure is calculated to a date, and interest or profit continues to run after it. Arrears or recovery action can move your file to a different unit of the bank and slow the redemption (ASCO Law), and BNM's non-complex examples assume a performing account. After completion, ask the bank for a letter confirming the facility is fully settled before you stop any standing instruction.

A factory owner's desk with sealed envelopes, an hourglass and a coin jar, facing the factory
IllustrationA factory owner's desk with sealed envelopes, an hourglass and a coin jar, facing the factory

What documents does a seller with a loan prepare?

Document Why it is needed
Copy of the title and a fresh official search Confirms the owner, the charge, any caveat and any restriction in interest
Loan account numbers and a letter authorising your lawyer The bank needs it to issue the redemption statement to your lawyer
Letter of offer and product disclosure sheet Lock-in end date, early settlement fee and notice period
Current year quit rent and assessment receipts Needed to register the discharge in Selangor, and for any consent application
Original title and duplicate charge Held by your bank; released against the redemption sum
Identity card, or the company's SSM documents, board resolution and, where section 223 applies, the shareholders' resolution To sign the SPA and the transfer
The company's SSM charge records To lodge the satisfaction of charge within 14 days
Your purchase SPA, stamp duty receipts and improvement cost receipts For your RPGT return; LHDN asks disposers to keep records for 7 years
CCC or CF, approved plans and TNB supply details The buyer's due diligence
Tenancy agreement and deposit records, if the factory is let The SPA must deal with the tenancy

If an RPGT exemption applies to your sale, sign the exemption forms and give a copy to the buyer, who then retains nothing for RPGT (Malaysian Bar).

What does it cost to discharge the charge?

  • Stamp duty on the discharge: the same duty as the charge but capped at RM10 (Stamp Act 1949, First Schedule item 65).
  • Land office registration in Selangor: RM50 to register the discharge of a financial institution's charge (PTG Selangor fees).
  • SSM lodgement for a company: RM50 for a local company.
  • Your lawyer's fees for the sale and the discharge, and any fee your bank charges for the statement under its own fee schedule. Ask for both in writing.
  • The early settlement fee, if you are still in the lock-in.

How is selling a factory with a loan different from selling a house?

The land office steps are the same. Around them, a factory is heavier: the charge often secures business facilities and directors' guarantees, BNM's turnaround standards are written for housing loans, business loans more often carry a lock-in, a company seller needs board and possibly shareholder approval and an SSM filing, and industrial leasehold titles often need state consent. Larger loans also mean a weak price turns into a real top-up. If the buyer's bank values the factory below the price, the buyer's loan shrinks and the differential sum grows; Jason Low's guide on bank valuations below the purchase price covers that side. Refinancing instead of selling, or selling the company's shares rather than the factory, are separate decisions with their own costs.

Frequently Asked Questions

Can I sell my factory if it is still under a bank loan?

Yes. The buyer or the buyer's bank pays your bank the redemption sum out of the balance of the price, your bank releases the title, and the transfer is registered free of your charge. You keep paying your instalments until the redemption sum reaches your bank.

Can I sell a factory that has a charge on the title?

Yes. The charge is discharged by Form 16N at completion, and under section 278 of the National Land Code the discharge takes effect when it is registered. If the unit has no separate title yet, the bank's assignment is released by a Deed of Receipt and Reassignment instead.

How long from signing the SPA until I receive the full price?

Commonly, the buyer pays the balance within 3 months of the SPA, with a 1 month extension at 8% a year, and the 3 months start from the consent date if your title needs state consent. Your bank is paid first; the surplus is usually held by your lawyer as stakeholder until registration and vacant possession, then released to you.

What documents does the seller need to prepare when the factory has a loan?

Prepare the title and a fresh search, your loan account details and a letter authorising your lawyer to obtain the redemption statement, your letter of offer, current quit rent and assessment receipts, identity or company documents with the board resolution, and your purchase records for RPGT. A company also needs its SSM charge records for the 14 day filing after the discharge.

How do I get a redemption letter from the bank?

Ask your bank for a redemption statement yourself, or have your lawyer request it with a letter of authorisation you sign. For housing loans BNM requires it within 2 working days; for a factory loan, ask your bank for its turnaround, especially if the factory secures other facilities. The statement expires, so time it close to completion.

How much is the fee for a discharge of charge in Malaysia?

Stamp duty on the discharge is capped at RM10, and in Selangor the land office charges RM50 to register the discharge of a bank's charge. On top come your lawyer's fees, any bank fee for the statement and, for a company, RM50 to lodge the satisfaction of charge with SSM.

What happens if my factory sells for less than the outstanding loan?

You pay the difference. The seller must top up any shortfall so that the bank receives the full redemption sum, and the bank will not release the title without it. Check the redemption figure against registered prices before you agree a price.

Will I pay a penalty if I sell during the lock-in period?

Only if your facility says so. Conventional business property loans often carry a lock-in fee, such as 2% of the facility limit on OCBC's commercial property loan. Islamic banks must grant ibra' and may only charge actual costs, not lost profit.

This guide is general information, not legal, tax or financial advice. Confirm the terms of your own facility with your bank and your sale with your lawyer and tax agent.

FactoryHub is dedicated to helping every client find the right factory or warehouse. To sell a factory or industrial land in Klang and the rest of Selangor, contact Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.