Key Takeaways

  • Yes, a factory owned by a Sdn Bhd can change hands by selling the company's shares. The title stays in the company's name and nothing is registered at the land office, but the buyer takes over the company with its debts, tax history, staff and contracts.
  • Stamp duty is the clearest gap. A transfer of the factory is charged 1% to 4% under Item 32(a) of the Stamp Act 1949, while a share transfer pays RM3 per RM1,000 on the price or the net tangible assets (NTA), whichever is higher. On RM14.9 million, the JPPH-registered median for a detached factory in Klang and Port Klang, that is RM580,000 against RM44,700.
  • The seller's tax depends on who sells what. A company selling its factory pays RPGT of 30%, 20%, 15% and then 10% from the 6th year, plus a balancing charge if it claimed industrial building allowance. Individuals selling shares in a real property company (RPC) pay RPGT at individual rates, which fall to 0% from the 6th year for citizens and PRs. A corporate shareholder pays 10% capital gains tax.
  • If the factory is charged to a bank, the bank has a say in both routes. CIMB's published SME facility agreement bars the borrower, without the bank's prior written consent, from changing its shareholders or directors and from disposing of a substantial part of its assets.
  • A company selling a factory worth more than 25% of its total assets needs its shareholders' approval by resolution under section 223 of the Companies Act 2016. In a share sale each shareholder signs for their own shares, so one holdout can stop a 100% sale.

This guide is for owners of a factory, warehouse or industrial land held in a private limited company, and for buyers who are offered the company instead of the property. It compares the two routes on stamp duty, the seller's tax, what the buyer inherits, the bank and the approvals inside the company, using the Acts, LHDN guidelines and a published bank agreement. It is general information, not legal or tax advice: your lawyer and tax agent should check your own numbers before anyone signs.

Can a factory be transferred by selling the company's shares?

Yes. When a Sdn Bhd is the registered proprietor, the factory belongs to the company, not to its shareholders. Under section 105 of the Companies Act 2016, a shareholder transfers shares "by a duly executed and stamped instrument of transfer" lodged with the company. Section 106 then requires the company to enter the buyer in the register of members within 30 days, unless the directors resolve to refuse or delay registration on grounds the Act or the constitution allows. The land office is not involved, because the land does not change owner.

That one difference drives everything else:

Asset sale: the company sells the factory Share sale: the shareholders sell the company
Seller The company Each shareholder
What the buyer gets The land and building, without the company's other debts The whole company: factory, bank loan, tax history, staff, contracts and claims
Main documents Sale and purchase agreement and a transfer registered at the land office Share sale agreement and Form of Transfer of Securities
Stamp duty, paid by the buyer Item 32(a): 1% to 4% of the price or market value Item 32(b): RM3 per RM1,000 of the price or NTA
Seller's tax The company pays RPGT, plus any balancing charge Individuals pay RPGT on RPC shares; companies pay capital gains tax
Buyer withholds 5% or 3% of the price for the company's RPGT 3% (7% for non-citizens) when individuals sell RPC shares
Bank Loan redeemed and the charge discharged Loan stays; bank consent to new shareholders and directors
Internal approval Board decision plus a shareholders' resolution (section 223) Each seller signs; the directors register the transfer

What a share sale leaves unchanged

The title still shows the company as owner, so the company's acquisition price and date for the factory do not move. If the buyer later has the company sell the factory, its RPGT is worked out against that original price, so the gain built up under the old owners stays inside the company. Industrial building allowance works the same way: the building has not been disposed of, so no balancing charge arises on a share sale, and the history of claims stays in the company's tax file. Expect a share buyer to price in this deferred tax when negotiating.

How much stamp duty: share sale or factory transfer?

The buyer pays stamp duty in both routes, under item 5 of the Third Schedule, as the LHDN First Schedule guideline states. The rates differ sharply:

  • Transfer of the factory, Item 32(a): RM1 per RM100 on the first RM100,000, RM2 up to RM500,000, RM3 up to RM1,000,000 and RM4 above that, on the price or the market value, whichever is higher.
  • Transfer of shares, Item 32(b): RM3 for every RM1,000 or part of it, on the price or the value of the shares on the transfer date, whichever is greater. For a profit making, loss making or dormant company, LHDN takes the higher of NTA and the price; only for a newly incorporated company is the price used.

To see the gap on a real figure: the JPPH-registered median price for a detached factory in Klang and Port Klang is RM14.9 million (69 deals in 24 months to August 2026, see Klang & Port Klang transaction prices and rents). Suppose that factory is the company's only asset, the company owes nothing, its NTA is below the price, and the buyer pays RM14.9 million for all the shares.

Transfer of the factory Transfer of all the shares
First RM100,000 at 1% RM1,000
Next RM400,000 at 2% RM8,000
Next RM500,000 at 3% RM15,000
Balance of RM13.9 million at 4% RM556,000
Total stamp duty RM580,000 RM44,700 (14,900 units of RM1,000 at RM3)

Two cautions. If the company's NTA is higher than the price, the share duty is charged on NTA. And when the company carries a bank loan, the share price is lower than the factory's value because the buyer takes the debt over, so compare the two routes on the total cost to the buyer, not on the headline price. The filing steps, the 30-day deadline and the late penalties are in our share transfer stamp duty guide, and the legal fees and stamp duty calculator works out the property side for any price.

What tax does the seller pay: a company or an individual?

When the company sells the factory

A company incorporated in Malaysia is a Part II disposer under the RPGT Act. HASiL's RPGT rates for disposals from 1 January 2019 are:

Disposal after acquisition Company incorporated in Malaysia Malaysian citizen or PR Non-citizen, or company incorporated abroad
Within 3 years 30% 30% 30%
4th year 20% 20% 30%
5th year 15% 15% 30%
6th year onwards 10% 0% 10%

The citizen rates apply from 1 January 2022. Only individuals get the exemption of RM10,000 or 10% of the chargeable gain, whichever is greater (HASiL exemptions). The company files Form CKHT 1A on e-CKHT in MyTax within 60 days of the disposal, and from 1 January 2025 online filing is mandatory. For disposals from year of assessment 2025, any tax balance is due within 90 days of the disposal (HASiL disposer and acquirer duties). The buyer must hold back 5% of the price if the company sells within 3 years, or 3% from the 4th year, and pay it to HASiL within 60 days (HASiL retention rules). On RM14.9 million that is RM745,000 or RM447,000. A company that deals in property as its business is taxed on the gain as business income instead.

The balancing charge sellers forget

If the company claimed industrial building allowance on the building, or capital allowances on machinery sold with it, the sale is a disposal under Schedule 3 of the Income Tax Act 1967. Where the disposal value is above the residual expenditure, the excess is a balancing charge on the business (paragraph 35), capped at the total allowances the company was given (paragraph 37). It is taxed at the company's income tax rate, which HASiL lists as 24% for most companies, with 15% and 17% bands for companies with paid up capital up to RM2.5 million and gross business income up to RM50 million. Agree with your tax agent how the price is split between land, building and machinery before the SPA is signed. Our industrial building allowance guide explains residual expenditure.

Getting the money out to the shareholders

After an asset sale the cash sits in the company. Paid out as dividends, it meets a second layer of tax: from year of assessment 2025, individual shareholders pay 2% on dividend income above RM100,000 a year, under the Income Tax Rules gazetted as P.U. (A) 148/2025 (HASiL explanatory notes).

When the shareholders sell their shares

Here the seller is the shareholder, and who that is decides the tax:

Seller of the shares Company is a real property company Company is not a real property company
Malaysian citizen or PR RPGT at the individual rates above, 0% from the 6th year, after the RM10,000 or 10% exemption Not under RPGT, and individuals are outside capital gains tax on unlisted shares
Non-citizen individual RPGT at 30% for 5 years, then 10% As for a citizen
Company, LLP, trust body or co-operative Capital gains tax: 10% of the gain; for shares acquired before 1 January 2024, a choice of 10% of the gain or 2% of the gross price Capital gains tax on the same terms

Since 1 January 2024, RPC shares sold by a company, LLP, trust body or co-operative fall under capital gains tax in the Income Tax Act instead of RPGT (HASiL on RPC shares). Capital gains tax is reported on the e-CKM form and paid within 60 days of the disposal (LHDN capital gains tax guidelines). An individual selling RPC shares files Form CKHT 1B within 60 days, the buyer files CKHT 2A and retains 3% of the price, or 7% from a non-citizen. A loss on RPC shares cannot be set against gains on other assets.

Is your company a real property company?

HASiL defines an RPC as a controlled company (not more than 50 members and controlled by not more than five persons) that owns real property or RPC shares whose defined value is at least 75% of the value of its total tangible assets. For real property, the defined value is the market value. Tangible assets include land, buildings, vehicles, plant and machinery, stock, debtors, bank and cash balances and investments; patents and trademarks are left out.

What decides it for your company is the mix of assets. A company that holds only the factory, with little cash, will usually pass the 75% test. An operating manufacturer with heavy machinery, stock, receivables and cash may fall below it. Because the test uses market value, ask a registered valuer for the factory's value before you rely on either answer. Shares that were RPC shares stay chargeable even if the company later stops being an RPC.

The same gain, three ways

For every RM1 million of chargeable gain, on a factory or on shares held for more than five years, the rates above give:

  • Company sells the factory: RPGT of RM100,000, plus any balancing charge, plus 2% dividend tax on what individuals later receive above RM100,000 a year.
  • Citizen shareholders sell RPC shares: RPGT of 0%.
  • Corporate shareholder sells the shares: capital gains tax of RM100,000, or 2% of the gross price if the shares were bought before 2024 and that works out lower.

This is arithmetic on published rates for a gain of that size, not a forecast of any sale. Our RPGT guide for factory sellers covers deductible costs and how the gain is computed, and the guide on buying a factory under a company or personal name covers the ownership choice at purchase.

Two ways to sell a factory company: handing over the property deed or the company shares
IllustrationTwo ways to sell a factory company: handing over the property deed or the company shares

What must the buyer check before buying the company's shares?

In a share purchase the buyer checks the company as well as the factory, because it inherits both.

The company

  1. Ownership and signing power: the company profile, register of members and register of directors, so every share and every signature is accounted for.
  2. Constitution and any shareholders' agreement: pre-emption rights, consent rules and limits on transfers.
  3. Charges: a company must lodge particulars of a charge with the Registrar within 30 days of creating it (section 352 of the Companies Act), so the SSM record shows registered security over its assets.
  4. Audited accounts: NTA (it sets the share stamp duty), director's loans, guarantees given and contingent liabilities.
  5. Tax: income tax, RPGT, SST and payroll filings, any open audit, and the record of capital allowances already claimed.
  6. Claims: litigation and insolvency searches on the company.
  7. People and licences: staff, EPF and SOCSO contributions, premises licence, manufacturing licence and environmental approvals.
  8. Contracts: tenancies, supply contracts and the bank facility.

The factory

Run the same checks as an outright purchase: a title search for the proprietor, encumbrances, express condition and restriction in interest; quit rent and assessment receipts; the CCC and approved plans; Bomba approvals; and the actual TNB supply. Our factory SPA guide lists the property clauses worth negotiating.

Protection in the share sale agreement

Ask your lawyer for warranties on the accounts, tax, title and claims, an indemnity for tax relating to the period before completion, and part of the price held by a stakeholder until the warranty period ends.

Foreign and non-Bumiputera buyers

The Ministry of Economy's Guideline on the Acquisition of Properties, in force since 13 July 2022, requires Ministry approval for an indirect acquisition by a non-Bumiputera interest through shares that changes control of a company owned by Bumiputera interest or a government agency, where property is more than 50% of the company's total assets and is worth more than RM20 million. A foreign interest buying industrial land worth RM1 million or more directly must hold it through a local company. For a Bumiputera lot or a leasehold title with conditions, ask your lawyer whether a change in who owns the company affects any condition on the title.

Does the bank have to agree?

If the factory is charged, plan on the bank's written consent in both routes. Clause 7.2 of CIMB's SME General Facility Agreement says the borrower will not, without the bank's prior written consent, "allow any change in its existing shareholders or their shareholdings and/or its directors and/or its management line-up", or sell, transfer or otherwise dispose of the whole or a substantial part of its undertaking, business or assets other than in the ordinary course of business. Disposing of a substantial part of the business or assets is also listed as an event of default where the bank considers it may affect the borrower's ability to perform. Each bank words its agreement differently, so read your own facility documents first.

  • Asset sale: the loan is normally redeemed from the sale price and the charge discharged so the title passes clean. The buyer's lawyer works from the bank's redemption statement. A separate FactoryHub guide covers selling a factory with an outstanding loan.
  • Share sale: the loan stays with the company. Before signing, ask the bank in writing whether it will accept the new shareholders and directors, whether it will release the outgoing directors' personal guarantees, and what guarantees it wants from the new owners. If it refuses, the buyer has to refinance, and a new loan brings its own loan agreement stamp duty.

How do the directors and several shareholders approve the sale?

Asset sale: a board decision that needs the shareholders

Section 223 of the Companies Act 2016 bars directors from entering into or carrying out the disposal of a substantial portion of the company's undertaking or property unless the deal is made subject to, or approved by, a resolution of the company. For an unlisted company, a portion is substantial if its value exceeds 25% of total assets, if the net profit attributed to it exceeds 25% of total net profit, or if its value exceeds 25% of issued share capital. A company whose main asset is its factory will almost always cross that line.

  • What kind of resolution: section 223 does not specify one, so an ordinary resolution applies unless the constitution says otherwise (section 290(3)). An ordinary resolution passes with more than half of the votes (section 291), and a private company may pass it as a written resolution (sections 290 and 297).
  • If it is skipped: any member can ask the court to restrain the directors; the deal is void except in favour of a buyer who paid value without actual notice of the breach; and a director commits an offence punishable by up to five years' jail, a fine of up to RM3 million, or both.
  • Selling to an insider: if the buyer is a director, a substantial shareholder or a person connected to one, and the asset is worth more than RM250,000, section 228 requires shareholders' approval at a general meeting, and the insider must account for any gain from a deal done without it.
  • Signing: under section 66 the company executes the SPA and transfer by its common seal, or by two authorised officers of whom one is a director, or by a sole director signing before a witness.

Make the shareholders' resolution a condition in the SPA, so the buyer is not exposed if it is challenged later.

Share sale: every seller signs for their own shares

Each shareholder owns their shares, and a majority cannot sign away a minority's shares. A buyer who wants 100% of the company therefore needs every shareholder to sell, unless a shareholders' agreement gives the majority a right to make the others sell on the same terms (a drag along clause). Check the constitution for pre-emption rights. The transfer form must be stamped before the company registers it, and directors who want to refuse or delay registration must pass a resolution with reasons within 30 days and send notice within 7 days (section 106).

When the shareholders disagree

The two routes give a minority different leverage. In a share sale, a shareholder who will not sell keeps their shares, and a buyer wanting full control may walk away. In an asset sale, a majority that can pass an ordinary resolution can approve the disposal, unless the constitution or a shareholders' agreement requires more. A minority shareholder can still go to court if the directors skip the section 223 approval. Settle the voting rules in writing before a buyer appears.

Shareholders of a factory company voting on a sale while one shareholder holds out
IllustrationShareholders of a factory company voting on a sale while one shareholder holds out

Which route suits which deal?

  • Individual shareholders who have held a property only company for more than five years: a share sale can mean 0% RPGT for citizen and PR sellers and 0.3% stamp duty for the buyer, if the buyer accepts the company's history.
  • A company that also runs a business, employs staff or has a long list of contracts: an asset sale gives the buyer a clean title, and many buyers will accept nothing else.
  • A factory bought less than three years ago: RPGT is 30% whether the company sells the factory or individuals sell RPC shares, so the stamp duty and liability questions decide.
  • A holding company owns the shares: compare 10% capital gains tax on the share gain, or 2% of the price for shares bought before 2024, with 10% RPGT at company level plus dividend tax on the way out.
  • A charged factory: in either route, get the bank's position in writing before the price is fixed.

Common mistakes

  • Assuming the company is not an RPC without valuing the factory against total tangible assets.
  • Signing a share sale while the facility agreement still forbids a change of shareholders.
  • Letting directors sign the SPA without the section 223 resolution.
  • Leaving the balancing charge out of the seller's tax estimate.
  • Forgetting the buyer's CKHT 2A filing and the 3% retention when individuals sell RPC shares.
  • Writing a share price below NTA and expecting stamp duty on the lower figure.
  • Checking only the factory in a share purchase, when the buyer inherits the company's past.

Frequently Asked Questions

Can a factory be transferred by selling company shares in Malaysia?

Yes. If a Sdn Bhd owns the factory, its shareholders can sell their shares and the factory stays in the company's name, with no transfer registered at the land office. The buyer gets control of the company, including its loans, tax history, staff and contracts, so it will want wider checks and warranties than in a property purchase.

What tax does a company pay when it sells its factory?

A company incorporated in Malaysia pays RPGT at 30% within three years, 20% in the 4th year, 15% in the 5th year and 10% from the 6th year, with no exemption amount. If it claimed industrial building allowance, it may also face a balancing charge taxed at its income tax rate. Paying the proceeds out as dividends can add 2% tax for individuals on dividend income above RM100,000 a year.

What is the tax difference between a company and an individual selling a factory?

The rates match for the first five years, but from the 6th year a Malaysian citizen or PR pays 0% RPGT while a company still pays 10%. Individuals also get an exemption of RM10,000 or 10% of the gain. A company that sells must then pay the money out to its shareholders, which can add dividend tax.

Do I pay RPGT when I sell shares in a company that owns a factory?

Only if the company is a real property company: a controlled company whose real property is at least 75% of its total tangible assets at market value. An individual selling RPC shares pays RPGT at the individual rates and files Form CKHT 1B within 60 days. A company selling the same shares pays capital gains tax instead.

What is the capital gains tax on the disposal of shares in Malaysia?

For a company, LLP, trust body or co-operative selling unlisted shares in a Malaysian company, it is 10% of the gain. For shares acquired before 1 January 2024, the seller may choose 2% of the gross price instead. The e-CKM return and payment are due within 60 days of the disposal; individuals are not chargeable to this tax.

Can one shareholder stop the sale of a factory owned by a company with several shareholders?

In a share sale, yes: no one can sell another person's shares, so a holdout can block a 100% sale unless a shareholders' agreement has a drag along clause. In an asset sale, the disposal needs a shareholders' resolution under section 223, normally an ordinary resolution passed by more than half of the votes, unless the constitution or an agreement requires more.

Is a share sale the same as an asset sale?

No. In an asset sale the company sells the factory and keeps its other assets and debts; in a share sale the shareholders sell the company, so the buyer gets everything inside it. The stamp duty, the seller's tax, the bank's role and the approvals all differ, as the comparison table above shows.

Does the bank need to agree if we sell the company's shares instead of the factory?

Usually yes, if the company has a loan. CIMB's SME facility agreement, for example, forbids a change in shareholders or directors without the bank's prior written consent. Ask the bank before you sign, including whether it will release the outgoing directors' guarantees.

FactoryHub is dedicated to helping every client find the right factory or warehouse. If you own a factory in a company and want to compare a share sale with an outright sale, or you want to sell your factory, talk to Peter Tan (REN 12771) at 016-666 6872 or Jason Low (PEA 1478) at 012-288 1834.