Industrial Property, Malaysia Industrial Property Articles
Industrial Property Articles on Factories & Warehouses
Showing 9 articles in Industrial Property
Cleanroom Factory in Malaysia for Pharma, Medical Devices and Cosmetics: NPRA and MDA Rules, Cleanroom Grades, HVAC, Conversion Cost and Lease Checks
What a pharmaceutical, medical device or cosmetic maker needs from a cleanroom factory in Malaysia: who approves it (NPRA or MDA), which grades apply, what the air handling must do, how a conversion runs, the fixed regulator fees and what to secure in a lease.
Food Factory Requirements in Malaysia: What the Building Needs for MeSTI, GMP, HACCP and Halal, and the Steps From Lease to Production
What a food factory in Malaysia needs from the building under the Food Hygiene Regulations 2009, what MeSTI, GMP, HACCP and halal add and cost, whether an ordinary industrial lot can be used, and the steps from signing a lease to the first production run.
Overhead Crane Factory in Malaysia: Building Requirements, DOSH Approval and Certificate of Fitness for 5, 10 and 20 Ton Cranes and Goods Lifts
What a factory needs to take a 5, 10 or 20 ton overhead crane, how DOSH design verification and the certificate of fitness work under the 2024 rules, whether a goods lift can be added, and what to check before renting or buying.
Factory Floor Cracks and Settlement in Malaysia: Why Floors Crack, How to Check a Used Factory, Strengthening for Presses and When Epoxy Is Needed
Why concrete factory floors crack and settle, how to tell shrinkage cracks from settlement, how to check a used factory floor before you buy or rent, how weak slabs are strengthened and settlement repaired, what a press foundation needs under Selangor's by-laws and DOE vibration limits, and when epoxy is really required.
Factory Clear Height vs Ceiling Height: What 30 ft, 40 ft, 12 m and 15 m Suit, Column Spacing and Why Taller Costs More
Clear height is measured to the lowest beam, pipe or light, not to the roof. What 30 ft, 40 ft, 12 m and 15 m buildings suit, how many racking levels fit, how column spacing limits the layout and why taller factories cost more.
Can a Factory Install a Backup Generator in Malaysia? Energy Commission Licence, Chargeman, DOE Notice, Fuel Storage, Bomba and Landlord Consent
Yes, a factory in Malaysia can install a standby generator if it stays separate from TNB's network. Above 5 kW it needs an Energy Commission licence or registration and a chargeman, the DOE must be notified 30 days before work, and a tenant needs the landlord's written consent.
How Much Does a TNB Power Upgrade Cost for a Factory? Steps, Timeline, Substation, 3000A and Who Pays
What TNB charges a factory to upgrade its power supply, how long each route takes, when a substation or your own transformer is needed, how 3,000A works, and who pays when you rent.
How to Choose a Factory Location in Malaysia: A Site Selection Checklist for Workers, Port Access, Power, Flood Risk, Zoning and Expansion
Factory site selection in Malaysia comes down to seven checks. Zoning and TNB power are pass or fail; workers, freight, water, flood history and room to expand are weighed by cost. Here is how to check each one, and what changes when you move to another state.
Which Industrial Area Suits My Industry in the Klang Valley? Logistics, Food, Heavy Engineering, E&E, Chemicals and E-commerce
How to match logistics, food, heavy engineering, E&E, chemicals and e-commerce to Klang Valley industrial areas by port and highway access, zoning class, TNB power, labour and JPPH-registered cost, and what to verify for each.
This category covers the factories, warehouses and industrial land that our listings are made of. Most of the articles look at Klang, Port Klang, Shah Alam and the rest of the Klang Valley, where most of our listings are.
The articles explain the specs that decide whether a building fits your business. These are built-up area, ceiling height, floor loading and the power supply in amps. They also compare locations by distance to the port, highway links and the workforce nearby.
Before you shortlist a property, ask three questions. Does the land use allow your industry? Is the power supply enough for your machines? Can the floor carry your racking or equipment? If one answer is no, a good price will not make up for it. Our listings show these specs where the source confirms them, and you can filter by them.
